A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

纤维素接枝丙烯酰胺/高岭土高吸水性复合材料研究   总被引：26，自引：3，他引：26  

林松柏  林建明  吴季怀  肖春妹 《矿物学报》2002,22(4):299-302

在高岭土的存在下，以N，N－亚甲基双丙烯酰胺作交联剂，以硝酸铈铵为引发剂微晶纤维素与丙烯酰胺进行接枝共聚反应，合成接枝纤维素／高岭土高吸水性复合材料。研究了纤维素与单体的配比、高岭土添加量、交联剂用量、引发剂用量及反应温度对吸水率的影响。用红外光谱表征复合材料的结构，用电子显微镜观察复合材料的表面与界面。结果表明，高岭土在接枝聚合物中能较好分散，复合材料吸水率达1166，对生理盐水溶液的吸水率达86。  相似文献   

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28   总被引：1，自引：0，他引：1  

Jean S. Kane 《Geostandards and Geoanalytical Research》2002,26(1):7-29

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.  相似文献   

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1   总被引：2，自引：0，他引：2  

Takashi Okai  Atsushi Suzuki  Hodaka Kawahata  Shigeru Terashima  Noboru Imai 《Geostandards and Geoanalytical Research》2002,26(1):95-99

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.  相似文献   

昆仑山口西8.1级地震前气象地温异常特征分析     

胡爱真  高慧慧  张晓清 《高原地震》2002,14(1):76-82

通过对青海省气象部门观测的3．2m气象地温资料相关距平、均值的处理和分析，总结了各自的异常形态。结果表明，3．2m气象地温异常对中震有一定的中长期前兆意义，作为预报地震的辅助手段是可行的。  相似文献   

乌鲁木齐10号泉He含量变化的映震特征   总被引：5，自引：0，他引：5  

高小其  蓝陵  许秋龙  李新勇  崔勇  李艳萍  迪里夏提 《四川地震》2002,(3):27-31

本文从监测泉点的水文地质概况入手，结合近19年来的资料分析了10号泉水中氦含量变化的映震特征：氦含量变化的地震前兆异常基本上都是正异常，且具有较好的重复性，泉点即流量测值遵循：背景值一趋势性上升（或突升）－最高值－趋势性下降（或突降）－恢复至背景值的变化过程。而地震常常发生在氦含量由高变低的过程中。最后初步认定了泉点较好的地质构造环境和氦特有的化学特性是该泉氦具有映震灵敏性的原因。  相似文献   

试述福建顺昌南舟萤石矿地质特征   总被引：1，自引：0，他引：1  

傅树超 《福建地质》2003,22(2):53-61

顺昌南舟萤石矿位于顺昌县埔上镇南舟村境内，1996年福建省区域地质调查队开展1：5万埔上幅区调时发现矿体，后开展普查工作表明该矿床规模大、交通方便，易于开采，现已投入开发利用。南舟萤石矿成矿地质特征在闽北丰富的萤石资源中具有一定代表性。  相似文献   

遵义市城区及周边地带制砖页(泥)岩地质特征和开发前景     

王祁仑  金华英 《贵州地质》2003,20(1):50-55

文章对遵义市城区及周边地带各地质时代的页（泥）岩已有资料进行了系统收集、归纳和适当的野外调研，认为区内制砖页（泥）岩层位可分为三类，第一、二类利用价值小或仅有部分可以利用，第三类则易于露采，大部分可利用，其层位为下奥陶统湄潭组和下三叠统夜郎组九级滩段，是区内可作制砖页（泥）岩利用最有开发前景的层位。同时对页（泥）岩的形成沉积环境作了简要分析，对其资源量进行了概略估算，经优化筛选，提出了10个供制砖厂企设置布局和矿源地选择之前需进行地质勘查的区块。  相似文献   

六枝煤矿区构造体系初步分析     

张羽光 《贵州地质》2003,20(2):99-102

六枝煤矿区属于威宁—郎岱褶皱束的一部分，NW向构造占据主要地位。地史上该区有多次升降运动，二叠纪的东吴运动，伴随基性岩浆活动；侏罗、白垩纪的燕山运动，使本区发生大规模的褶皱和断裂；喜马拉雅运动的影响使本区构造复杂化。形成NE向扭性断层；构造复合的基本方式是横跨和限制。构造分析表明，NE向构造形成较早，NW向构造形成较晚。  相似文献   

某地平板玻璃原料用石英砂的提纯研究     

彭光菊  黄永平  张石林  莫伟泉  黄松 《矿产与地质》2003,17(1):24-26

某地石英矿砂通过磁选分离法、稀酸浸泡法处理后，矿砂不同程度地降低了铁、铝、钙镁的含量；采用磁选分离 稀酸浸泡法联合处理后，使该地石英砂的化学成分达到了优质的生产平板玻璃用硅质原料的国家标准。  相似文献