Adhesion of foulings on surface energy of silicone rubber coatings     

Tian Jun  Xue Qunji 《海洋学报(英文版)》1999,18(1):97-102

INTRODUCTIONBiologicalfoulingonthehullsofshipsandothersubmergedmarinestructurescausesgreatha~s.Inadditiontodecreasingship'sspeed,andincreasingitsfuelconsumption,biologicalfoulingalsoincreasestheweightofnavigationalbuoys,interfereswithoperatingequipmentandsounddevices,clogsseawaterpipingsystems,adverselyaffectsheat-exchangerperformance,andpromotescorrosionofmetalsurface(HuangandCat,1984).UPtothepresent,antifoulingpaintshaveachievedtheireffectivenessbyreleasingattheirsurfacebiocides,allcom…  相似文献   

海底管道维修管卡密封结构的性能分析及测试     

赵张帆  石湘  化怡龙 《海洋工程》2023,41(1):101-109

密封压力是带压堵漏维修管卡的关键性能。介绍了323.9 mm(API 12英寸)维修管卡样机的总体结构及密封原理,选用接触压力准则作为管卡的密封评价准则,利用ANSYS Workbench软件建立了管卡密封结构的二维轴对称有限元模型,分析了密封结构闭环中薄弱部分在不同密封圈压缩量下的接触压力,然后试验测试了管卡样机密封圈压缩量和密封压力,并与有限元计算接触压力进行了对比。分析结果表明管卡密封结构最薄弱部分的接触压力随着周向密封圈压缩量的增大而增大,且主要是中间接触部分起到密封作用。通过试验验证了理论分析的管卡密封结构最薄弱位置,并发现相同密封圈压缩量下试验测试的密封压力与计算的接触压力近似,两者的变化趋势基本一致。有关分析思路和试验方法可以为管卡密封结构的设计提供重要参考。  相似文献   

Reduction of pounding effects in elevated bridges during earthquakes     

Robert Jankowski  Krzysztof Wilde  Yozo Fujino 《地震工程与结构动力学》2000,29(2):195-212

Pounding of adjacent superstructure segments in elevated bridges during severe earthquakes can result in significant structural damage. The aim of this paper is to analyse several methods of reduction of the negative effects of collisions induced by the seismic wave propagation effect. The analysis is conducted on a detailed three‐dimensional structural component model of an isolated highway bridge. The results show that the influence of pounding on the structural response is significant in the longitudinal direction of the bridge and significantly depends on the gap size between superstructure segments. The smallest response can be obtained for very small gap sizes and for gap sizes large enough to prevent pounding. Further analysis indicates that the bridge behaviour can be effectively improved by placing hard rubber bumpers between segments and by stiff linking the segments one with another. The experimental results show that, for the practical application of such connectors, shock transmission units can be used. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

Experimental study of deformable connection consisting of buckling‐restrained brace and rubber bearings to connect floor system to lateral force resisting system          下载免费PDF全文

Georgios Tsampras  Richard Sause  Robert B. Fleischman  Jose I. Restrepo 《地震工程与结构动力学》2017,46(8):1287-1305

This paper presents experimental and numerical studies of a full‐scale deformable connection used to connect the floor system of the flexible gravity load resisting system to the stiff lateral force resisting system (LFRS) of an earthquake‐resistant building. The purpose of the deformable connection is to limit the earthquake‐induced horizontal inertia force transferred from the floor system to the LFRS and, thereby, to reduce the horizontal floor accelerations and the forces in the LFRS. The deformable connection that was studied consists of a buckling‐restrained brace (BRB) and steel‐reinforced laminated low‐damping rubber bearings (RB). The test results show that the force–deformation responses of the connection are stable, and the dynamic force responses are larger than the quasi‐static force responses. The BRB+RB force–deformation response depends mainly on the BRB response. A detailed discussion of the BRB experimental force–deformation response is presented. The experimental results show that the maximum plastic deformation range controls the isotropic hardening of the BRB. The hardened BRB force–deformation responses are used to calculate the overstrength adjustment factors. Details and limitations of a validated, accurate model for the connection force–deformation response are presented. Numerical simulation results for a 12‐story reinforced concrete wall building with deformable connections show the effects of including the RB in the deformable connection and the effect of modeling the BRB isotropic hardening on the building seismic response. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Stress softening behaviour of HDNR bearings: modelling and influence on the seismic response of isolated structures          下载免费PDF全文

Enrico Tubaldi  Laura Ragni  Andrea Dall'Asta  Hamid Ahmadi  Alan Muhr 《地震工程与结构动力学》2017,46(12):2033-2054

  相似文献   

大直径钢管桩土塞效应的拟静力判断方法          下载免费PDF全文

刘润  郭绍曾  周龙  闫澍旺 《地震工程学报》2017,39(1):20-27

钢管桩在贯入过程中土塞效应的正确判断对打桩阻力及承载力的预测有重要影响,常用的静力平衡土塞效应判断方法主要适用于小直径钢管桩。随着海洋平台工作水深的不断增加及海上风电工程的建设,直径大于2m的大直径钢管桩被广泛采用,管桩直径的增加改变了桩管内土体的受力与变形特征。通过数值模拟方法获得砂土中不同径长比的钢管桩在打桩过程中桩周土体的破坏模式,确定采用梅耶霍夫公式计算打桩过程中桩端土体阻力,同时分析锤击惯性力对桩管内土塞的影响,提出采用拟静力平衡法判断大直径钢管桩的土塞闭塞效应。开展不同径长比管桩的室内小比尺打桩模型试验,并对实际工程中的土塞闭塞效应进行判断,验证拟静力平衡法对判断大直径钢管桩土塞效应的适用性。  相似文献   

基于FEA的填充墙与隔震器协同抗震系统性能分析          下载免费PDF全文

李然 《地震工程学报》2018,40(5):891-896

隔震器与填充墙对建筑抗震性能有很大作用。为了探究填充墙布置形式及填充材料和隔震器协同作用对钢筋混凝土框架结构动力特性及抗震性能的影响,采用等效斜撑理论,对3种不同填充墙布置形式与隔震器协同作用的抗震系统方案进行对比分析,研究发现顶层不布置填充墙与隔震器协同抗震系统钢筋混凝土框架结构的抗震性能最佳。在此系统上分析了不同填充材料对钢筋混凝土框架结构抗震性能的影响,结果表明,加气混凝土砌块填充墙的钢筋混凝土框架结构抗震性能最好。  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building          下载免费PDF全文

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

离散元法模拟吸力锚施工中生成的土塞研究   总被引：2，自引：0，他引：2  

丁红岩  韩雪松  张浦阳  张明 《海洋技术学报》2004,23(1):52-56

吸力锚是近年来在海洋工程中出现并得以迅速发展的一种新型基础形式。然而吸力锚施工中产生的土塞现象对顺利施工和安全使用构成了严重的威胁。文章采用了离散单元法来研究吸力锚施工中的土塞现象,并得到了一些结论。圆形刚性颗粒模型是文章中所采用的基本模型,同时动态松弛法成为基本的求解方法。  相似文献   

考虑尺寸效应的近海桥梁天然橡胶隔震支座力学性能老化时变规律研究          下载免费PDF全文

李艳敏  马玉宏  赵桂峰 《世界地震工程》2020,(4):169-177

目前天然橡胶支座（NRB）的性能研究大多未考虑尺寸效应,在前期开展的近海桥梁隔震支座和材料老化时变规律研究的基础上,同时考虑支座直径尺寸变化和老化作用时间的影响对NRB的性能进行研究。首先采用ABAQUS有限元软件对不同直径尺寸NRB的性能进行分析,得到了NRB性能随直径尺寸的变化规律;然后结合前期老化作用对NRB及其橡胶材料性能时变规律的影响研究成果,分析了直径尺寸及老化作用时间共同作用下,NRB性能的变化规律,并通过ABAQUS有限元分析,验证了该变化规律的准确性。结果表明:NRB的水平刚度和竖向刚度均随其直径尺寸的增大呈正比例增大趋势;NRB水平刚度比和竖向刚度比均随老化作用时间的增长呈线性增大趋势;且直径为150mm的NRB在实际环境老化60a后,其水平刚度和竖向刚度的增长幅度分别为:30.8%和16.41%,由此可见老化作用时间对NRB水平刚度的影响较显著,对其竖向刚度的影响较小。研究内容可为隔震桥梁结构中支座缩尺模型试验的相关设计提供参考,并为将实验室缩尺橡胶隔震支座的相关成果较好地应用于实际工程计算及设计中提供依据。  相似文献