Nishinoshima volcano in the Ogasawara Arc: New continent from the ocean?     

Yoshihiko Tamura  Osamu Ishizuka  Tomoki Sato  Alexander R. L. Nichols 《Island Arc》2019,28(1)

Nishinoshima, a submarine volcano in the Ogasawara Arc, approximately 1 000 km south of Tokyo, Japan, suddenly erupted in November 2013, after 40 years of dormancy. Olivine‐bearing phenocryst‐poor andesites found in older submarine lavas from the flanks of the volcano have been used to develop a model for the genesis of andesitic lavas from Nishinoshima. In this model, primary andesite magmas originate directly from the mantle as a result of shallow and hydrous melting of plagioclase peridotites. Thus, it only operates beneath Nishinoshima and submarine volcanoes in the Ogasawara Arc and other oceanic arcs, where the crust is thin. The primary magma compositions have changed from basalt, produced at considerable depth, to andesite, produced beneath the existing thinner crust at this location in the arc. This reflects the thermal and mechanical evolution of the mantle wedge and the overlying lithosphere. It is suggested that continental crust‐like andesitic magma builds up beneath submarine volcanoes on thin arc lithosphere today, and has built up beneath such volcanoes in the past. Andesites produced by this shallow and hydrous melting of the mantle could accumulate through collisions of plates to generate continental crust.  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building     

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

Metal flux as an alternative parameter in evaluating the resource potential for co-rich ferromanganese crusts     

Hisaaki Sato 《Marine Georesources & Geotechnology》2018,36(7):768-780

We propose a geochemical parameter, “metal flux” in evaluating hydrogenetic Co-rich ferromanganese crust deposits in the Pacific seamount area, that is based on physical, chemical, and geological characterization of the integrated growth piles of crusts. We calculated the metal flux for fifteen sites from different depths ranging between 900-6000m from different seamounts. The secular and areal variations of metal flux indicate a strong geological controls, and also can be a reliable tool for estimating an economic potential of the crusts. The Co flux decreases with increasing water depth, followed by almost constant flux of Ni and Mn. The Al and Fe fluxes vary with regions, indicating higher values in the western regions near the island arc probably related to a supply from the Asian continents. The results imply that Co, a redox sensitive metal element, is controlled by redox conditions of seawater, while Fe and Al are by terrigenous input. The metal flux reflects global and regional conditions and controls the compositional diversity of metals, thus consequently, the parameter can be a reliable powerful tool to estimate or single out more potential areas.  相似文献   

Mechanical properties and stress–dilatancy relationships of unsaturated soil under various cyclic loading conditions     

Tun Tun  Win  Sato  Tomotaka  Saito  Hirotaka  Kohgo  Yuji 《Acta Geotechnica》2020,15(7):1799-1813

Acta Geotechnica - Most studies investigating the effect of cyclic loading on soil properties have been conducted for saturated soils. Embankments such as fill dams, roads and railways are usually...  相似文献   

Potential of mosques to serve as evacuation shelters for foreign Muslims during disasters: a case study in Gunma,Japan     

Kotani  Hitomu  Tamura  Mari  Li  Jiayue  Yamaji  Eiji 《Natural Hazards》2021,109(2):1407-1423

Natural Hazards - Foreigners tend to be vulnerable to disasters due to religious and cultural differences. In Japan, Muslim foreign residents, who are minorities, likely face difficulties in terms...  相似文献   

Submarine slope–fan sedimentation in an ancient forearc related to contemporaneous magmatism: The Upper Cretaceous Izumi Group,southwestern Japan          下载免费PDF全文

Atsushi Noda  Daisuke Sato 《Island Arc》2018,27(2)

The Izumi Group in southwestern Japan is considered to represent deposits in a forearc basin along an active volcanic arc during the late Late Cretaceous. The group consists mainly of felsic volcanic and plutonic detritus, and overlies a Lower to Upper Cretaceous plutono‐metamorphic complex (the Ryoke complex). In order to reconstruct the depositional environments and constrain the age of deposition, sedimentary facies and U–Pb dating of zircon grains in tuff were studied for a drilled core obtained from the basal part of the Izumi Group. On the basis of the lithofacies associations, the core was subdivided into six units from base to top, as follows: mudstone‐dominated unit nonconformably deposited on the Ryoke granodiorite; tuffaceous mudstone‐dominated unit; tuff unit; tuffaceous sandstone–mudstone unit; sandstone–mudstone unit; and sandstone‐dominated unit. This succession suggests that the depositional system changed from non‐volcanic muddy slope or basin floor, to volcaniclastic sandy submarine fan. Based on a review of published radiometric age data of the surrounding region of the Ryoke complex and the Sanyo Belt which was an active volcanic front during deposition of the Izumi Group, the U–Pb age (82.7 ±0.5 Ma) of zircon grains in the tuff unit corresponds to those of felsic volcanic and pyroclastic rocks in the Sanyo Belt.  相似文献   

Postglacial stratigraphic evolution of a current-influenced sandy shelf: offshore Kujukuri strandplain,central Japan     

Naohisa Nishida  Taku Ajioka  Ken Ikehara  Rei Nakashima  Hajime Katayama  Tomoyuki Sato  Seishiro Furuyama  Toru Tamura 《Sedimentology》2020,67(1):559-575

Sandy shelf sediments are important elements of clastic sedimentary systems because of their wide distribution in the geological record and their significance as hydrocarbon reservoirs. Although many studies have investigated shelf sediments influenced by waves or tidal currents, little is known about shelf sediments influenced by oceanic currents, particularly their lithofacies characteristics and stratigraphic evolution. This study investigated the stratigraphic evolution of shelf sediments off the Kujukuri strandplain facing the Pacific Ocean, which is influenced by the strong Kuroshio Current. Sediment cores were obtained from six locations on the Kujukuri shelf (34 to 124 m water depth) using a vibrocorer. The dominant lithofacies is mud-free sand with low-angle cross-lamination associated with alternating beds of finer and coarser sand with cross-lamination. These display depositional processes influenced by storm waves and the Kuroshio Current, respectively. This finding is consistent with the previously presented modern and historical observations of the Kuroshio Current and estimates of the storm-wave base. Radiocarbon dates show that the sediment succession formed during the last transgressive and highstand stages after 13·1 ka. The depositional processes during the stages represent a transition from storm waves with abundant sediment supply to both storm waves and the Kuroshio Current with sediment starvation mainly due to its trapping in the strandplain. Comparison to other Holocene–Modern shelf systems suggests that the sandy shelf successions are strongly influenced by oceanic currents under conditions of limited riverine input and open coastal geometry. The resultant sand-dominated succession is characterized by reversal of the proximal to distal grain-size trend compared to the fining for most other recognized wave/storm-dominated shelf successions. This is because of seaward increase in the influence of the Kuroshio Current. Thus, shelf deposits are naturally complex, and these may be further complicated by the additional influence of oceanic currents above the usual wave-dominated and tide-dominated end members.  相似文献   

The earliest stage of Izu rear‐arc volcanism revealed by drilling at Site U1437, International Ocean Discovery Program Expedition 350     

Tomoki Sato  Takashi Miyazaki  Yoshihiko Tamura  James B. Gill  Martin Jutzeler  Ryoko Senda  Jun‐Ichi Kimura 《Island Arc》2020,29(1)

The International Ocean Discovery Program Expedition 350 drilled between two Izu rear‐arc seamount chains at Site U1437 and recovered the first complete succession of rear‐arc rocks. The drilling reached 1806.5 m below seafloor. In situ hyaloclastites, which had erupted before the rear‐arc seamounts came into existence at this site, were recovered in the deepest part of the hole (～15–16 Ma). Here it is found that the composition of the oldest rocks recovered does not have rear‐arc seamount chain geochemical signatures, but instead shows affinities with volcanic front or some of the extensional zone basalts between the present volcanic front and the rear‐arc seamount chains. It is suggested that following the opening of the Shikoku back‐arc Basin, Site U1437 was a volcanic front or a rifting zone just behind the volcanic front, and was followed at ~ 9 Ma by the start of rear‐arc seamount chains volcanism. This geochemical change records variations in the subduction components with time, which might have followed eastward moving of hot fingers in the mantle wedge and deepening of the subducting slab below Site U1437 after the cessation of Shikoku back‐arc Basin opening.  相似文献   

Analytical study of performance evaluation for seismic retrofitting of reinforced concrete building using 3D dynamic nonlinear finite element analysis     

Yuichi Sato  Shinichi Kajihara  Yoshio Kaneko 《地震工程与工程振动(英文版)》2011,10(2):291-302

This paper presents three-dimensional fi nite element (FE) analyses of an all-frame model of a three-story reinforced concrete (RC) building damaged in the 1999 Taiwan Chi-Chi Earthquake. Non-structural brick walls of the building acted as a seismic resistant element although their contributions were neglected in the design. Hence, the entire structure of a typical frame was modeled and static and dynamic nonlinear analyses were conducted to evaluate the contributions of the brick walls. However, the results of the analyses were considerably overestimated due to coarse mesh discretizations, which were unavoidable due to limited computer resources. This study corrects the overestimations by modifying (1) the tensile strengths and (2) shear stiffness reduction factors of concrete and brick. The results indicate that brick walls improve frame strength although shear failures are caused in columns shortened by spandrel walls. Then, the effectiveness of three types of seismic retrofi ts is evaluated. The maximum drift of the firstoor is reduced by 89.3%, 94.8%, and 27.5% by Steel-confi ned, Full-RC, and Full-brick models, respectively. Finally, feasibility analyses of models with soils were conducted. The analyses indicated that the soils elongate the natural period of building models although no signifi cant differences were observed.  相似文献   

Pressure and temperature dependence of the viscosity of a NaAlSi<Subscript>2</Subscript>O<Subscript>6</Subscript> melt     

Akio Suzuki  Eiji Ohtani  Hidenori Terasaki  Keisuke Nishida  Hiromi Hayashi  Tatsuya Sakamaki  Yuki Shibazaki  Takumi Kikegawa 《Physics and Chemistry of Minerals》2011,38(1):59-64

The viscosity of a silicate melt of composition NaAlSi₂O₆ was measured at pressures from 1.6 to 5.5 GPa and at temperatures from 1,350 to 1,880°C. We employed in situ falling sphere viscometry using X-ray radiography. We found that the viscosity of the NaAlSi₂O₆ melt decreased with increasing pressure up to 2 GPa. The pressure dependence of viscosity is diminished above 2 GPa. By using the relationship between the logarithm of viscosity and the reciprocal temperature, the activation energies for viscous flow were calculated to be 3.7 ± 0.4 × 10² and 3.7 ± 0.5 × 10² kJ/mol at 2.2 and 2.9 GPa, respectively.  相似文献