Diagenesis and origin of calcite cement in the Flemish Pass Basin sandstone reservoir (Upper Jurassic): Implications for porosity development     

《Marine and Petroleum Geology》2016

The Flemish Pass Basin is a deep-water basin located offshore on the continental passive margin of the Grand Banks, eastern Newfoundland, which is currently a hydrocarbon exploration target. The current study investigates the petrographic characteristics and origin of carbonate cements in the Ti-3 Member, a primary clastic reservoir interval of the Bodhrán Formation (Upper Jurassic) in the Flemish Pass Basin.The Ti-3 sandstones with average Q_86.0F_3.1R_10.9 contain various diagenetic minerals, including calcite, pyrite, quartz overgrowth, dolomite and siderite. Based on the volume of calcite cement, the investigated sandstones can be classified into (1) calcite-cemented intervals (>20% calcite), and (2) poorly calcite-cemented intervals (porous). Petrographic analysis shows that the dominant cement is intergranular poikilotopic (300–500 μm) calcite, which stared to form extensively at early diagenesis. The precipitation of calcite occured after feldspar leaching and was followed by corrosion of quartz grains. Intergranular calcite cement hosts all-liquid inclusions mainly in the crystal core, but rare primary two-phase (liquid and vapor) fluid inclusions in the rims ((with mean homogenization temperature (T_h) of 70.2 ± 4.9 °C and salinity estimates of 8.8 ± 1.2 eq. wt.% NaCl). The mean δ¹⁸O and δ¹³C isotopic compositions of the intergranular calcite are −8.3 ± 1.2‰, VPDB and −3.0 ± 1.3‰, VPDB, respectively; whereas, fracture-filling calcite has more depleted δ¹⁸O but similar δ¹³C values. The shale normalized rare earth element (REE_SN) patterns of calcite are generally parallel and exhibit slightly negative Ce anomalies and positive Eu anomalies. Fluid-inclusion gas ratios (CO₂/CH₄ and N₂/Ar) of calcite cement further confirms that diagenetic fluids originated from modified seawater. Combined evidence from petrographic, microthermometric and geochemical analyses suggest that (1) the intergranular calcite cement precipitated from diagenetic fluids of mixed marine and meteoric (riverine) waters in suboxic conditions; (2)the cement was sourced from the oxidation of organic matters and the dissolution of biogenic marine carbonates within sandstone beds or adjacent silty mudstones; and (3) the late phases of the intergranular and fracture-filling calcite cements were deposited from hot circulated basinal fluids.Calcite cementation acts as a main controlling factor on the reservoir quality in the Flemish Pass reservoir sandstones. Over 75% of initial porosity was lost due to the early calcite cementation. The development of secondary porosity (mostly enlarged, moldic pores) and throats by later calcite dissolution due to maturation of organic matters (e.g., hydrocarbon and coals), was the key process in improving the reservoir quality.  相似文献   

The diagenetic history of Oligocene-Miocene sandstones of the Austrian north Alpine foreland basin     

《Marine and Petroleum Geology》2016

Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC.  相似文献   

Effects of Column Diameter on Setting Behavior of Dredged Slurry in Sedimentation Experiments     

Yu-Feng Gao  Yuan Zhou  Da-yong Li 《Marine Georesources & Geotechnology》2016,34(5):431-439

This article investigates the influence of dimensions of a settling column on the settling mode and the settling rate. End conditions of the settling stage in the hindered settling were also analyzed. It was found that the settling mode in a column with a smaller diameter tends to be consolidation settling. The effect of a settling column wall decreases with increasing column diameter, and it can be ignored provided the column diameter is larger than 14.5 centimeters. For the difference in initial water content, the settling behavior of the slurry develops a different sensitivity to the diameter effect. The influence of column diameter reduces as the initial water content of the slurry becomes higher. It is suggested that the internal diameter of the column used in a sedimentation experiment should be 14.5 centimeters.  相似文献   

红河油田低压易漏地层水平段固井技术          下载免费PDF全文

闫吉曾 《探矿工程》2018,45(5):40-45

为提高红河油田水平井固井质量,满足后期分段压裂需求,对红河油田水平井固井技术进行了研究。针对红河油田水平段固井技术难点,通过室内和现场试验,优选出了GSJ水泥浆体系,基于实测地层压力与地层破裂压力,进行平衡压力固井设计确定了环空浆体结构,为提高顶替效率,优化了扶正器类型与加放位置,专业软件模拟表明套管居中度＞73%,良好的井眼准备和套管漂浮措施确保了管柱的顺利下入;加长胶塞、树脂滚轮刚性旋流扶正器和关井阀等附件的使用,保证了固井质量。现场应用53口水平井,水泥浆全部返至地面,CBL测井结果表明,固井优良率达81.13%。该固井技术成功应用于红河油田水平井中,保证了固井质量,满足了后期分段压裂的需要。  相似文献   

新疆乌苏市巴音沟煤层气勘探井护壁堵漏技术          下载免费PDF全文

陈磊  赵廷忠  夏荣  尼亮亮 《探矿工程》2018,45(5):50-54

在煤层气勘探井固体岩心钻探施工过程中,遇岩层构造发育、地下水系发达的施工条件,钻进中往往发生钻井多层漏失、护壁困难的情况。因煤层气勘探井对录井工作的特殊要求,护壁堵漏工作的成功与否成为钻探施工的关键。在进行钻井护壁堵漏处理时,因技术方法不得当或未采取正确的计算经常导致护壁堵漏失败,甚至引发重大的钻探事故。通过对工区施工的经验总结,提出了切实可行的护壁堵漏技术措施,为类似地层钻井勘探施工提供借鉴。  相似文献   

泥浆护壁成孔灌注桩后注浆技术正确应用研究          下载免费PDF全文

焦文秀 《探矿工程》2018,45(7):87-89

为保证泥浆护壁成孔灌注桩后注浆技术正确应用,首先分析了后注浆技术对泥浆护壁灌注桩的作用机理以及天津地区的应用现状,然后通过对影响其应用效果的多种因素,如从业人员资格、成孔成桩质量、注浆阀、注浆泵、注浆相关参数等分析研究,提出相应的措施或建议。  相似文献   

阜阳华纺新天地超长空桩成孔施工控制措施          下载免费PDF全文

邢敏 《探矿工程》2018,45(6):89-91

阜阳华纺新天地桩基工程,原计划基坑底面施工调整为地面施工,增加了近14 m的空桩。为此,工程桩施工质量存在桩位、孔底沉渣厚度、钢筋笼位置、砼质量、砼桩顶标高等方面控制的相关问题。本文介绍了其施工情况,其经验可供类似工程借鉴。  相似文献   

东营凹陷沙河街组碳酸盐胶结物成因机制     

孟伟  隋风贵  郝雪峰  张守鹏  秦峰  伍松柏 《地质论评》2021,67(Z1):67z1107-67z1108

正碳酸盐矿物是砂岩储层中主要的成岩产物之一。碳酸盐胶结物较为活跃,其溶蚀及沉淀广泛发育于砂岩储层内。碳酸盐的溶蚀及沉淀是砂岩储层改造的重要成因之一。明确碳酸盐胶结物的成因机制对预测深部储层具有重要的意义。本次研究,采用铸体薄片及扫描电镜观察,明确碳酸盐胶结物的产状。对不同产状碳酸盐胶结物的分布、  相似文献   

准噶尔盆地车排子北部地区沙湾组碳酸盐胶结物差异性分布控制因素     

赵晓东  杨少春  鞠小玉  陈刚强  许涛 《地质论评》2021,67(3):736-751

通过铸体薄片、AxioVision图像分析、岩芯常规分析、地层水测试等方法,在明确了碳酸盐胶结物类型的基础上,采用多方法进行了碳酸盐胶结物含量的测定,探讨了准噶尔盆地车排子地区北部沙湾组碳酸盐胶结物差异性分布控制因素,并揭示了其对储层物性、油水分布的影响。研究表明,车北地区沙湾组储层中发育大量的早期碳酸盐胶结物,不均匀充填部分原生粒间孔,具有强烈的非均质性;在岩芯常规测定碳酸盐胶结物含量的基础上,利用多次数、多视域的AxioVision图像分析补充测定了碳酸盐胶结物含量,与岩芯常规测定结果对比相对误差-0.14,弥补了数据点的不足。碳酸盐胶结物含量平面上具有"北高南低"的差异性分布特征,胶结物形成于封闭性好、水体交替停滞的还原环境中,地层水Ca~(2+)含量的差异决定了碳酸盐胶结物分布的差异,而地层水Ca~(2+)含量的差异主要受古地貌控制,古高地水体较浅易富集Ca~(2+)是CaCO_3沉淀的良好场所,沉积微相在局部井区起到一定的控制作用。碳酸盐胶结物差异性导致研究区储层物性具有"双峰值"特征,并造成了高黏超稠油油藏复杂的油水分布关系。  相似文献   

全风化花岗岩地层中高固相离析浆液灌浆机理研究          下载免费PDF全文

赵钰  郑洪  曹函  林飞  王旭斌  贺茉莉 《水文地质工程地质》2021,48(2):78-88

全风化花岗岩地层稳定性差、遇水易发生崩解,工程上使用常规材料防渗加固注浆时效果较差。针对这一情况,依托湖南省郴州市莽山水库防渗加固灌浆项目,通过自主设计的全风化花岗岩地层注浆室内模拟试验装置,进行模拟注浆试验,实现了浆液在整个注浆过程中的扩散情况模拟,对不同注浆压力、不同位置点所取试样开展单轴抗压、抗剪强度及渗透率测试试验,对不同注浆压力下完整结石体取样观察,研究以全风化花岗岩颗粒为配方主体材料的高固相离析浆液在全风化花岗岩地层的防渗加固效果及浆液扩散模式。结果表明:该浆液在全风化花岗岩地层扩散过程中经历了渗透扩散、挤密压缩、劈裂扩展三个阶段,是一种复合注浆形式;以全风化花岗岩颗粒为主体的高固相离析浆液在全风化花岗岩地层注浆中效果显著,随着注浆压力提升,单轴抗压强度显著提升为原土体的3.25～13.67倍,抗剪强度在不同法向压力情况下提升为原土体的1.63～2.69倍,渗透系数从10?4 cm/s下降至10?5 cm/s甚至10?6 cm/s。  相似文献