大跨度预应力混凝土连续刚构桥的动力特性分析   总被引：20，自引：0，他引：20  

宗周红  赖苍林  林友勤  任伟新 《地震工程与工程振动》2004,24(3):98-104

介绍了福建泉州后渚大桥——大跨度预应力混凝土连续刚构桥的现场环境振动实验．并利用频域中的单模态识别法(SDOFI)、峰值法(PP)和时域中的随机子空间识别法(SSI)分别进行桥梁动力特性识别。利用ANSYS建立了全桥三维有限元模型并进行了理论模态分析,基于参数分析和环境振动测试结果对有限元模型进行了标定,建立了该桥的基准有限元模型,该模型可服务于桥梁长期健康监测与状态评估。  相似文献   

日本海域地壳结构基本特征及其地质意义   总被引：4，自引：2，他引：2  

李瑞磊  赵雪平  杨宝俊 《地球物理学进展》2004,19(1):56-60

利用日本海域内完成的多条地震测深剖面及其它地球物理资料．综合分析该域地壳结构特点以及Benioff带特点．日本海域地壳结构具有陆壳、洋壳区别和两分、三分两类;Benioff带在不同方向上具有不同倾角,延伸深度差别较大;日本海开裂的动力源自太平洋板块西向俯冲所产生的多期挤压和引张应力场．  相似文献   

基于聚焦合成的显微三维成像系统   总被引：9，自引：0，他引：9  

姜志国  史文华  韩冬兵  孙维忠  刘莉 《CT理论与应用研究》2004,13(4):9-15

本文利用显微镜物镜焦深范围有限,显微三维样本成像时需要一序列图像才能聚焦清晰特点,研究开发利用图像处理技术扩展显微成像焦深范围,应用改进Laplacian聚焦算子实现序列图像的融合显示,同时,提出了一种基于区域小波变换的序列显微图像融合算法并加以实现.用高斯插值算法得到三维显微图像的高度图,设计了一种网格轮廓线算法对高度索引图进行了三维重建显示和测量,并利用立体视觉原理生成了三维物体的左右视图和立体视图.应用此方法可以完成显微目标的表面三维参数的测量分析.  相似文献   

兰州地区最古老黄土剖面的粒度学及孢粉学研究     

李麒麟  王小伟  张有龙 《地层学杂志》2004,28(2):148-151

兰州地区最古老黄土剖面露头良好,地层出露较齐全,通过剖面磁性地层研究,确定兰州地区最古老黄土形成于1.84MaBP以前,对山城湾岭黄土剖面进行了粒度及孢粉的研究,探讨了第四纪沉积环境的演化。  相似文献   

浙江省沿海陆域与舟山海域地闪回击特征分析     

陈军  孙轶  李京校  张骁  林伟  于梦颖 《气象科技》2022,50(1):139-146

采用2016-2020年浙江省闪电定位资料,利用Access和MATLAB对浙江省陆域、舟山海域地闪回击特征进行分析.结果显示:浙江省陆域年平均地闪回击密度为1.97次·km-2·a-1,正地闪回击密度为0.10次·km-2·a-1,正地闪回击占总地闪回击的5.1％,正地闪回击平均电流强度为42.49 kA,负地闪为3...  相似文献   

The Concept and Development of Smart Structures Technologies for Long-span Cable-supported Bridges     

《Marine Georesources & Geotechnology》2013,31(3-4):315-331

This article presents an overview of smart structures technologies in connection with long-span cable-supported bridges. Considering the broad scope of the smart structures technologies, two subareas, namely, structural health monitoring and structural control technologies, and their applications in long-span cable supported bridges, are identified as the focus of this review. It is believed that by, adopting the smart structures technologies, reliable operation and hazard management of long-span bridges can be achieved much more efficiently and can be made economically feasible, especially for bridges located at sites with high risks of severe natural hazardous events, such as those facing the bridges of the Taiwan Strait Crossing project. The feasibility of and practical issues in implementing the smart structures technologies in the design and construction of long-span cable-supported bridges are also discussed here. Considering the time span of the construction of the Taiwan Strait Crossing, some of the innovative technologies with a high potential for future long-span bridge applications, while still at the stage of exploratory research at the time of writing, are also examined as it is believed these technologies might have become prevalent by the completion time of the Taiwan Strait Crossing project.  相似文献   

Mapping QTLs of caudal fin length in common carp (Cyprinus carpio L.)     

C Lu  Y Zhang  X Zheng  X Zhang  C Li  Y Kuang 《新西兰海洋与淡水研究杂志》2013,47(1):96-105

Common carp (Cyprinus carpio L.) exhibits significant morphological variability in the shape and size of the caudal fin. In this study, we used 190 progeny from two F₁ parents to identify and map quantitative trait loci (QTLs) that influence caudal fin length (CFL) and the ratio (RCS) between caudal fin length and standard length (SL) based on a microsatellite genetic map of common carp. A total of 15 QTLs were detected in seven different linkage groups. One significant and eight suggestive QTLs affecting CFL were identified on LG8, LG14, LG29, LG32 and LG44, which explained 8.0%–22.1% of the phenotypic variation; six suggestive QTLs affecting RCS were detected on LG8, LG32, LG46 and LG48, which explained 7.0%–15.4% of the phenotypic variation. The QTLs for caudal fin length detected in this study may serve as a starting point for identification of genes involved in caudal fin development in common carp.  相似文献   

Field calibration of a formula for entrance mixing of river inflows to lakes: Lake Taupo,North Island,New Zealand     

Robert H. Spigel  Clive Howard‐Williams  Max Gibbs  Scott Stephens  Barry Waugh 《新西兰海洋与淡水研究杂志》2013,47(4):785-802

Field measurements were used to validate predictions for the initial dilution of negatively buoyant, cold‐water inflows to Lake Taupo, as part of a study to quantify mixing processes associated with the two largest inflows to the lake. The predictions were made using a formulation originally derived for positively buoyant, warm‐water inflows to cooling ponds. The formulation predicts the total dilution of an inflow during its inertia‐dominated phase between its entrance to the lake and the point where buoyancy forces are great enough to cause the inflow to plunge and form a submerged density current. In one of the measured inflows, the inflowing jet was free to entrain from both sides; in the other, entrainment was restricted on one side by attachment of the inflowing jet to the shoreline of a bay just upstream of the plunge point. In the former example, the unmodified coefficients from the cooling pond formulation provided an excellent prediction of initial dilution. In the latter example, entrainment was reduced and different coefficients were derived. In both examples the inflows remained attached to the lake bed throughout their course until their liftoff at depths of 45–55 m to form interflows. The difference between coefficients for the two inflows indicates that the coefficient values should be considered site‐specific. The formulation is not valid for inflows that separate from the bottom of the inflow channel before plunging. The entrance mixing formulation was incorporated in a more general model of lake stratification, DYRESM, which already includes a well‐documented routine for routing underflows down submerged channels on the bed of a lake. Application of the model to the inflows measured in Lake Taupo gave good results for two model outputs that were not involved in the calibration of the entrance mixing formulation, but that are affected by the result of the initial dilution calculation—the temperatures in the river plume after it has plunged, and the insertion depth.  相似文献   

百58井区地震数据高分辨率成像与断裂带构造特征     

赵玉莲  李录明  王海燕  胡自多  马建华  李斐 《吉林大学学报(地球科学版)》2011,41(4):1219-1225

准噶尔盆地西北缘百口泉地区百58井区是一个被多条断裂切割的复杂断块区,地层倾角变化大;现有的三维地震资料成果剖面上地震波组连续性差,断裂带附近资料成像模糊,地层接触关系不清楚,很难进行精细构造解释。为获得研究区沉积盖层精细结构,在详细分析原始地震资料特点和存在问题的基础上,有针对性地采用叠前多域去噪和非线性叠前时间偏移等多种处理技术,对已有的三维地震资料进行了高分辨率精细成像处理。新的成果剖面揭示出该区百－乌断裂带发育特征、空间展布及平面组合关系。根据地层厚度、构造特征、地震反射波组特征等,划分该区地层为二叠系、三叠系、侏罗系－白垩系三大构造层,以三大构造层不同的构造特征为依据确定了研究区分为西部推覆构造带、中部断阶构造带和东部斜坡构造带3个构造单元。  相似文献   

延长探区下古生界马家沟组储层流体包裹体特征     

强娟  曹红霞  吴海燕  赵谦平 《地质与资源》2013,22(2):125-128

流体包裹体研究在划分油气运移充注期次、确定油气藏形成时间等方面均有重要的应用价值.通过镜下观察流体包裹体的特征,划分类型,描述其特征,对与烃类共生的盐水包裹体进行均一化温度测试,并结合其他相关地质资料,认为延长探区马家沟组储层流体包裹体的均一温度集中分布在85~115℃范围内,包裹体捕获时的埋藏深度为2500~2800 m.结合盆地的埋藏史推测天然气成藏时间为晚三叠-早侏罗世.  相似文献