一种基于BP算法学习的小波神经网络   总被引：2，自引：1，他引：2  

陈哲  冯天瑾  陈刚 《中国海洋大学学报(自然科学版)》2001,31(1)

为发展 Szu的基于信号表示的小波神经网络 ,提出一种多输入多输出的小波网络模型 ,网络隐层采用框架小波函数、输出层采用 Sigmoid激励函数 ,并选用“熵误差函数”以加速网络的学习速度。奇偶判别和混沌时间序列预测例子的实验结果表明了它具有良好的函数逼近能力和推广能力 ,收敛速度和均方误差均优于相同结构的多层感知器模型。  相似文献   

关于修改港工钢筋混凝土规范小偏心受压构件正截面强度计算的建议     

王清湘 《海洋工程》1995,(2)

本文提出在小偏心受压构件正截面强度计算中，取消弯曲抗压强度ｆｃｍ（Ｒｗ），采用轴心抗压强度ｆｃ，这与构件的实际破坏形态相符。对小偏心受压构件正截面强度计算提出了设计建议。特别是对工程上大量应用的矩形截面对称配筋小偏压构件提示了简捷的设计方法，与以往的近似计算方法相比具有物理概念明确，精度高，方法简捷的特点。  相似文献   

Discussion on Coastal Erosion Near Xizhuang, Penglai, China   总被引：1，自引：0，他引：1  

Wu Guiqiu Li Wei Professor  First Institute of Oceanography  State Oceanic Administration  Qingdao Associate Researcher 《中国海洋工程》1994,(2)

-In this work, on the basis of the characteristics of coastal erosion near Xizhuang (Penglai, Shandong, China) and the in-situ measured data and theoretical calculation, the causes of coastal erosion there are obtained: (1) natural erosion, (2) beach sand borrowing, and (3) sand borrowing at the Dengzhou shoal near Xizhuang, which results in the loss of the function of the wave force resistance of the shoal. Since the wave energy is increased, the longshore sediment transport rate is increased. Coastal erosions are more and more serious. A scientific basis to reduced the calamity of coastal erosion in local area is presented. Some experiences are accumulated for studying coastal erosion.  相似文献   

琼州海峡铁路轮渡新海湾港区泥沙淤积问题     

沈莹  李大山  张镜潮  杨正己 《海洋工程》1997,(3)

海南省拟建琼州海峡铁路轮渡。本文通过对海峡南岸新海湾轮渡港址附近自然条件、岸滩演变和输沙特征的分析研究，对不同类型港区布置方案港内开挖区和航道的淤积强度、淤积量等进行了计算，并对不同防护建筑物的有效拦沙时间等进行了探讨和计算，提出了港区类型推荐方案。  相似文献   

Geochemical and hydrodynamic constraints on the distribution of trace metal concentrations in the lagoon of Nouméa, New Caledonia   总被引：1，自引：0，他引：1  

Christophe Migon  Sylvain Ouillon  Xavier Mari  Emmanuel Nicolas 《Estuarine, Coastal and Shelf Science》2007,74(4):756

Seawater samples were collected in the lagoon of Nouméa (southwest New Caledonia) along two transects from eutrophic coastal bays to the oligotrophic barrier reef. Land-based emissions to the lagoon were measured with dissolved and particulate concentrations of chromium (Cr) and nickel (Ni), used as tracers of both terrigenous and industrial (Ni ore treatment) activities, as well as dissolved and particulate concentrations of zinc (Zn), used as a tracer of urban effluents. The spatial variability of metal concentrations was related to geochemical and hydrodynamic conditions, i.e., respectively: (1) natural and anthropogenic emission sources, and chemical processes occurring in the water column; and (2) water residence times. The parameter used to describe the residence time of water masses was the local e-flushing time, i.e. the time required for a tracer mass contained within a given station to be reduced by a factor 1/e. High metal concentrations were found in coastal areas (up to 9000 ng dissolved Ni L⁻¹), and steeply decreased with distance from the coast (down to 101 ng dissolved Ni L⁻¹ near the barrier reef) to reach levels similar to those found in remote Pacific waters, suggesting a rapid renewal of waters close to the barrier. Distributions of metals in the lagoon are controlled upstream by land-based emission sources and later chemical processes. Then hydrodynamics constrain metal distributions, as shown by the observed relationship between local e-flushing times and the spatial variability of metal concentrations. In addition, a change in the direction of prevailing winds yielded a decrease of dissolved metal concentrations at the same site by a factor of 2.5 (Cr and Ni) and 2.9 (Zn). It is suggested that the residence time is a key parameter in the control of elemental concentrations in the lagoon waters, as much as land-based emission sources.  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献   

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan     

Martin Gutowski  Monika Breitzke  Volkhard Spieß 《Marine Geophysical Researches》2002,23(1):57-75

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.  相似文献   

地震勘探在不同地质条件下的新应用     

卢占武  张宏远 《海洋地质前沿》2005,21(4):28-32,i002

20世纪末，地震勘探技术在油气勘探、煤田勘探、工程勘探等多方面的应用都有了突飞猛进的发展。总结了近年来地震勘探在岩性、沉积相、构造体系等不同地质条件下的应用实例，用以说明地震勘探的多用性及其强大的生命力。  相似文献   

1999年以来台湾及邻近海域7.5级以上强震前的条带现象     

张年明  郑健志 《台湾海峡》2005,24(4):426-432

中国台湾地区地处欧亚板块与菲律宾海板块之间,地震活动频繁．本文报道了 我国台湾地区及其邻近海域1985～2002年间5．5级以上地震的条带内外频度比分 布,并着重研究了1999—2002年中发生的3次7．5级以上地震前的条带现象．其结 果表明:台湾地区近期发生的3次7．5级以上大地震前,5．5级以上地震呈条带分 布．这些条带符合条带内地震个数Nin≥6的条件,符合条带内、外频度比Nin／(Nin Nout)≥75％的条件,也符合条带长宽比大于5的要求,只是与板内地震条带相比,条 带的长度较短．  相似文献   

Far-field control of long-term changes in Northumberland (NW North Sea) coastal zooplankton     

Frid  Christopher L. J.; Huliselan  Niette V. 《ICES Journal of Marine Science》1996,53(6):972-977

  相似文献