改进分数阶达尔文粒子群的多Renyi熵图像分割算法     

袁玉珠 《测绘通报》2019,(6):34-40

针对智能优化图像分割算法易陷入局部最优、分割精度不高等问题,本文融合改进的分数阶达尔文粒子群算法和二维Renyi熵多阈值,提出了一种新的多阈值遥感图像分割算法。算法利用粒子自身进化信息来定义进化因子,结合进化因子并利用高斯图函数调整分数阶次a系数以实现精确计算和快速收敛;根据局部最优概率因子对局部最优位置进行Levy飞行随机扰动以提高算法跳出局部最优的能力;同时将二维Renyi熵单阈值扩展到多阈值分割上,并结合改进的分数阶达尔文粒子群算法,将二维Renyi熵多阈值应用于遥感图像分割中仿真结果表明,与其他2种智能优化分割算法相比,本文分割算法在细节处理和分割精度上均有明显优势,在PRI上至少提升7.27%、VOI至少降低6.5%、GCE至少降低10.4%.  相似文献   

顾及有色噪声的自适应粒子滤波UWB定位算法     

张园  谭兴龙  赵长胜  李晓明 《测绘通报》2019,(8):30-33

传统卡尔曼滤波算法要求噪声模型符合高斯分布,在UWB室内定位中,由于载体本身的机制等干扰,观测噪声不仅仅是白噪声,也存在有色噪声的情况,而粒子滤波可以处理有色噪声的问题。本文通过增加似然分布自适应调整来改进粒子滤波用于目标跟踪的精度,同时研究在白噪声、有色噪声下似然分布自适应调整粒子滤波和拓展卡尔曼滤波在UWB中的优势与不同。试验结果表明：观测噪声为白噪声时,拓展卡尔曼滤波和粒子滤波均可以较好地实现对行人的定位跟踪;观测噪声为有色噪声时,自适应粒子滤波定位效果优于粒子滤波、拓展卡尔曼滤波。  相似文献   

基于GPS和水准数据的微粒群算法联合反演祁连山北缘断裂三维滑动速率     

刘杰 《大地测量与地球动力学》2019,39(9):906-909

将微粒群算法与位错理论模型相结合,采用中国地壳运动观测网络提供的青藏高原地区2001~2004年GPS测量数据和2000~2006年水准测量数据,通过常规定权和附有相对权比的方法对祁连山北缘断裂的三维滑动速率进行联合反演,并与蚁群算法反演结果进行对比。结果表明,微粒群算法收敛速度快、稳定性高,结合经典位错理论模型,是一种可以有效求解断层三维滑动速率反演问题的优化算法,在大地测量反演领域极具应用潜力。  相似文献   

海底爆破振动强度衰减规律及中华白海豚保护措施研究     

费鸿禄  关福晨  包士杰  肖绍青 《海洋通报》2019,38(4):405-414

为确保海底爆破施工所诱发的振动不对中华白海豚造成危害,基于量纲分析法对萨道夫斯基经验公式进行修正,建立适用于预测海底爆破质点峰值振动速度的相似准数方程。在此基础上根据现场试验数据进行非线性回归运算,得到相关参数并分析了海底爆破振动强度衰减规律。分析表明:海底爆破质点峰值振速主要由单段装药量、监测点距爆心水平距离、覆盖层厚度及海水深度等因素决定。将参数值分别代入萨氏公式及新建公式计算预测值并进行误差估计,其平均误差分别为20.3%和10.0%,新建公式提高了对质点振速预测的准确性。利用新建公式及超压内安全振速估算保护中华白海豚的安全距离并提出相应的保护措施,为同类工程施工提供理论参考依据。  相似文献   

长条状粗颗粒在垂直管路中最小输送速度试验研究     

符瑜  肖红  夏建新 《海洋工程》2019,37(4):63-69

随着陆地金属资源的日益枯竭,深海矿产资源已经成为各国的重要战略目标。在深海采矿过程中,海底锰结核的形状除了圆球状,还有长条状等,颗粒形状对固液两相流管道输送特性具有很大影响。基于固液两相流垂直管道提升输送试验系统,探究不同工况下长条状颗粒在垂直上升流中最小输送速度的变化规律及特性,并得到了长条状群体颗粒最小输送速度计算公式。结果表明:长条状颗粒在垂直管道中上升过程中,颗粒中心轴与输送方向趋向于垂直,使颗粒在管道截面的投影面积最大化;长条状单颗粒的最小输送速度随着颗粒长径比增大而减小;在不同长径比工况下,随着管段颗粒平均浓度减小,长条状群体颗粒的最小输送速度均增大,且随着长径比增大,群最小输送速度减小。  相似文献   

Indoor localization for pedestrians with real-time capability using multi-sensor smartphones     

Catia Real Ehrlich 《地球空间信息科学学报》2019,22(2):73-88

ABSTRACT

The localization of persons or objects usually refers to a position determined in a spatial reference system. Outdoors, this is usually accomplished with Global Navigation Satellite Systems (GNSS). However, the automatic positioning of people in GNSS-free environments, especially inside of buildings (indoors) poses a huge challenge. Indoors, satellite signals are attenuated, shielded or reflected by building components (e.g. walls or ceilings). For selected applications, the automatic indoor positioning is possible based on different technologies (e.g. WiFi, RFID, or UWB). However, a standard solution is still not available. Many indoor positioning systems are only suitable for specific applications or are deployed under certain conditions, e.g. additional infrastructures or sensor technologies. Smartphones, as popular cost-effective multi-sensor systems, is a promising indoor localization platform for the mass-market and is increasingly coming into focus. Today’s devices are equipped with a variety of sensors that can be used for indoor positioning. In this contribution, an approach to smartphone-based pedestrian indoor localization is presented. The novelty of this approach refers to a holistic, real-time pedestrian localization inside of buildings based on multi-sensor smartphones and easy-to-install local positioning systems. For this purpose, the barometric altitude is estimated in order to derive the floor on which the user is located. The 2D position is determined subsequently using the principle of pedestrian dead reckoning based on user's movements extracted from the smartphone sensors. In order to minimize the strong error accumulation in the localization caused by various sensor errors, additional information is integrated into the position estimation. The building model is used to identify permissible (e.g. rooms, passageways) and impermissible (e.g. walls) building areas for the pedestrian. Several technologies contributing to higher precision and robustness are also included. For the fusion of different linear and non-linear data, an advanced algorithm based on the Sequential Monte Carlo method is presented.  相似文献   

Measurements of suspended particulate matter with laser in-situ scattering and transmissometry in the Jiaozhou Bay in China     

WEI Jianwei  SHI Xuef  FANG Xisheng  ZHANG Weibin 《海洋学报(英文版)》2007,26(1):55-65

1 IntroductionKnowledge of suspended particle size and distri-bution is the key elements for better understandingthe sediment transport processes ( Wang et al.,2004), primary production (Ning et al., 2004),water quality controlling and pollution predictio…  相似文献   

Determination of trajectories of metallic spheres settling in non-newtonian fluids     

Derek D.  Lichti  Monica M.  Gumulya  Richard R.  Horsley 《The Photogrammetric Record》2009,24(125):37-50

  相似文献   

观测值含有粗差的抗差粒子滤波算法     

范澎湃  隋立芬  曹轶之 《测绘工程》2009,18(2):24-27

作为非线性滤波的代表,粒子滤波得到广泛应用。该算法通过随机生成的具有权重的样本（粒子）来计算后验概率密度。其中赋权的过程需要综合系统信息和观测信息,当观测值含有粗差时,会使粒子错误赋权影响滤波结果。提出一种新的基于抗差估计的抗差粒子滤波算法,通过计算粒子等价权,抑制观测值粗差的影响。模拟计算分析表明,当观测值含有粗差时,与标准粒子滤波相比,该方法能有效提高滤波精度。  相似文献   

A two-dimensional finite volume hydrodynamic model for coastal areas: Model development and validation     

A.H. Daoud  K.A. Rakha  A.G. Abul-azm   《Ocean Engineering》2008,35(1):150-164

A two dimensional implicit finite volume scheme for solving the shallow-water equations is developed. The effects of the Coriolis force, surface wind stress, and waves are included. A non-uniform rectilinear forward staggered grid is used with Cartesian coordinates. The time integration is performed using the Euler implicit technique. The convective flux is treated using the deferred correction method. The viscous terms are discretized using a second order central difference approximation. The SIMPLE (Semi-Implicit Method for Pressure-Linked Equations) algorithm is used for coupling the velocity components and the water elevation gradient for the water level correction. The system of equations is solved sequentially using the Strongly Implicit Procedure (SIP). To simulate wave driven current, a phase averaged wave model is used first to simulate wave transformation and calculate radiation stresses. The performance of the developed model is validated for different sources of external forces and different combinations of boundary conditions. The validation cases include tidal circulation in a harbor and wave induced currents behind a breakwater parallel to the coastline. The model is finally applied to simulate the flow pattern in a closed artificial lagoon and along the coastline near Damietta Port located along the Northern coast of Egypt. Results of the developed model agree well with the published results for the considered cases.  相似文献