贵州威宁麻窝山岩溶盆地沉积物中粘土矿物特征及其古气候指示意义          下载免费PDF全文

任增莹  吴攀  曹星星 《沉积与特提斯地质》2016,36(1):70-76

利用X射线衍射等分析方法,对贵州威宁麻窝山岩溶盆地沉积物中粘土矿物进行研究,获得了粘土矿物的组成、相对含量、结晶度指数、化学指数以及相对含量比值等方面的信息,探讨该盆地的沉积环境演化特征。研究表明,粘土矿物以伊/蒙混层矿物(30%~75%)和绿泥石(10%~45%)为主,高岭石(5%~20%)和伊利石(10%)次之,基本不含蒙脱石。伊/蒙混层矿物和绿泥石含量呈负相关性。高岭石含量在剖面底部较稳定,在484cm上部出现较大的波动。伊利石结晶度和化学指数与伊/蒙混层矿物含量具有较好的正相关性,且在第Ⅰ阶段相对于其它指标较敏感,出现波动。通过综合对比分析,将研究区剖面划分为4个阶段,其是3个冷暖干湿的大循环和若干个小循环气候环境的物质记录。  相似文献   

Axial friction response of full-scale pipes in soft clays     

《Applied Ocean Research》2016

The axial friction response of subsea pipelines in soft clays is a very important aspect for designers of subsea pipelines but the response is not well understood so far. There is a pressing need for the comprehension of the response. In this paper, model tests are performed using full-scale pipes coated with polyethylene (PE) to study the effects of the set-up period, the pipe diameter, the buried depth of the pipe, the shear strength of soft clays and the loading rate on the axial friction response of pipelines in soft clays. The variations of the axial friction coefficient are analyzed using the effective stress method based on model test results. The results show that the axial friction resistance increases with the increasing pipe diameter but the effect of the pipe diameter on the axial friction coefficient can be neglected. The ultimate axial resistance also increases with the increase of the buried depth of pipelines, the undrained shear strength of soft clays and the loading rate. The axial friction coefficient increases with the increasing loading rate. However, the axial friction coefficient decreases with the increasing buried depth. The method to determine the axial friction coefficient is developed by analyzing model test results, which considers the effects of the diameter, the buried depth, the undrained shear strength of soft clays and the loading rate. The study results not only extend the industry data base but also supply a basis to determine the axial friction coefficient of PE-coated pipes in soft clays for ocean engineering geological investigations.  相似文献   

Incremental elastoplastic FEM for simulating the deformation process of suction caissons subjected to cyclic loads in soft clays     

《Applied Ocean Research》2016

This paper presents an incremental elastoplastic finite element method (FEM) to simulate the undrained deformation process of suction caisson foundations subjected to cyclic loads in soft clays. The method is developed by encoding the total-stress-based bounding surface model proposed by the authors in the ABAQUS software package. According to the model characteristics, elastoplastic stress states associated with the incremental strains of each iteration are determined using the sub-incremental explicit Euler algorithm, and the state parameters describing the cyclic accumulative rates of strains are updated by setting state variables during the calculations. The radial fallback method is also proposed to modify the stress states outside the bounding surface to the surface during determination of the elastoplastic stress states. The stress reversals of soil elements are judged by the angle between the incremental deviatoric stress and the exterior normal vector at the image stress point on the bounding surface to update the mapping centre and state variables during cyclic loading. To assess the general validity of the method, the reduced scale model tests and centrifuge tests of suction caissons subjected to cyclic loads are simulated using the method. Predictions are in relative good agreement with test results. Compared with the limit equilibrium and quasi-static methods, the method can not only determine the cyclic bearing capacity, but can also analyse the deformation process and the failure mechanisms of suction caisson under cyclic loads in soft clays.  相似文献   

Sexual reproduction and early life‐history traits of the Mediterranean soft coral Alcyonium acaule          下载免费PDF全文

Núria Teixidó  Nathaniel Bensoussan  Andrea Gori  Ida Fiorillo  Núria Viladrich 《Marine Ecology》2016,37(1):134-144

Understanding processes that contribute to a better comprehension of the population dynamics of long‐lived species is critical for the maintenance and potential recovery of such species. Despite the abundance of soft corals in Mediterranean rocky reefs, little information exists on their life histories and reproductive patterns. In this study, we assessed the main reproductive characteristics and early life‐history traits of the long‐lived soft coral Alcyonium acaule. The sex ratio was 1:1; the smallest fertile colonies were one finger in size (2.1 ± 0.6 cm in height), and both colony and polyp fertility increased with colony size. Likewise, the number of eggs and spermary sacs per polyp increased significantly with colony size, whereas the diameter of the female and male sexual products did not. Over 6 years of observations (2007–2012), spawning occurred primarily in July, after the seawater reached 20 °C, in a single spawning episode per year. Approximately 80% of female colonies released eggs, which were retained on the surface of the mother colony by mucous strings for up to a few days. High fertilization rates were observed during spawning in 2008 and 2009 (94.9% and 87.0%, respectively). The timing of development was ~24 h for the blastulae, ~48–72 h for the planulae and 8–22 days for metamorphosis into primary polyps. Survivorship of planulae was relatively high (~50% at 45 days after release), but only 24% of larvae metamorphosed into primary polyps, and their survivorship was moderate after 2 months (65% in 2008 and 74% in 2009). Asexual reproduction was negligible, indicating that sexual reproduction is the main mechanism supporting the maintenance and recovery of populations.  相似文献   

Spatial distribution of crustaceans associated with shallow soft‐bottom habitats in a coral reef lagoon          下载免费PDF全文

Carlos Navarro‐Barranco  José M. Guerra‐García 《Marine Ecology》2016,37(1):77-87

The ecology and diversity of the shallow soft‐bottom areas adjacent to coral reefs are still poorly known. To date, the few studies conducted in these habitats dealing with macroinvertebrate fauna have focused on their abundance spatial patterns at high taxonomic levels. Thus, some aspects important to evaluate the importance and vulnerability of these habitats, such as species diversity or the degree of habitat specialization, have often been overlooked. In this study we compared the crustacean assemblages present in four different habitats at Magoodhoo Island coral reef lagoon (Maldives): coral rubble, sandy areas and two different seagrass species (Thalassia hemprichii and Cymodocea sp.). Forty‐two different crustacean species belonging to 30 families and four orders were found. ‘Site’ was a significant factor in all of the statistical analyses, indicating that tropical soft‐bottom habitats can be highly heterogeneous, even at a spatial scale between tens and hundreds of meters. Although traditionally it has been considered that seagrass beds host greater species diversity and abundance of organisms than adjacent unvegetated habitats, no differences in the univariate measures of fauna (abundance of organisms, number of species and Shannon diversity) were observed among habitats. However, sandy areas, coral rubble and seagrass beds exhibited different species composition of crustacean communities. The percentage of taxa considered as potential habitat specialists was 27% and the number of species exclusively occurring in one habitat was especially high in seagrass beds. Thus, degradation of this vegetated habitat would result in a great loss of biodiversity in tropical shallow soft‐bottom habitats.  相似文献   

福建省平潭岛东北部软质海崖蚀退特征研究     

常方强 《海洋科学》2016,40(4):100-107

为了揭示软质海崖的侵蚀机制,现场利用量测方法研究了福建省平潭岛东北部软质海崖的蚀退特征、蚀退模式和影响因素,并利用自制崩解仪测试了砂土和粉质黏土的崩解速率。结果表明,软质海崖滑塌物体积、堆积距离均随海崖高度增加而增大,每次滑塌海崖蚀退距离位于0.08~1.23 m;滑塌物覆盖住崖脚后具有临时保护崖脚的作用,但由于其受到扰动较易发生再次蚀退;崖脚海蚀槽的形成对滑塌起到重要控制作用;降雨、海洋水动力、强风和人为活动是造成蚀退的四大因素;在土体抗侵蚀方面,砂土的抗侵蚀能力最弱,粉质黏土的居中,黏土的最强;现场干燥粉质黏土的崩解速率为2.4 cm/min。  相似文献   

Leachate studies on fly ash-stabilised expansive clay liners     

M. Uma Shankar 《Geomechanics and Geoengineering》2016,11(2):114-118

This paper presents leachate studies on fly ash-stabilised expansive clay liners. Fly ash in different contents (0%, 10%, 20% and 30%) by dry weight of the expansive clay was added to the clay, and the ash-clay blend was compacted as a liner overlying a compacted lateritic clay layer. Deionised water (DIW) and calcium chloride (CaCl₂) solutions of varying concentration (5 mM, 10 mM, 20 mM, 50 mM, 100 mM and 500 mM) were used as the permeating fluids in the leachate studies. Chemical analysis of the leachate was performed. For a given CaCl₂ concentration, the concentrations of both calcium ion and chloride ion in the leachate decreased up to a fly ash content of 20%, and thereafter they increased when the fly ash content was increased to 30%. Further, for a given fly ash content, concentrations of calcium ion and chloride ion increased with increasing CaCl₂ concentration.  相似文献   

Numerical Studies on Piled Gravity Base Foundation for Offshore Wind Turbine     

Yun Wook Choo  Ji-hoon Seo  Young-Nam Kim  Jeong-min Goo  Young-ho Kim 《Marine Georesources & Geotechnology》2016,34(8):729-740

This study aims to investigate a hybrid gravity base foundation to support offshore wind tower. A new hybrid gravity base foundation considered in this study has five component piles, referred to as ‘piled gravity base foundation’. The three-dimensional finite element analyses were carried out for the piled gravity base foundation subjected to a combined load with a lateral load and overturning moment. The parametric analyses were undertaken varying the loading height and direction, the rigidity of the piled gravity base foundation, the field soil layers, and the clay strength. Overall, the response of the piled gravity base foundation was significantly influenced by the interaction between the cone base piles and the surrounding soil. The increased strength of the soil led to a significant reduction of the pile and gravity base foundation responses, in terms of the bending moments, axial forces, lateral displacements, and rotations.  相似文献   

Laboratory Study for Influence of Clay Content (CC) on Wave-Induced Liquefaction in Marine Sediments     

B. Liu 《Marine Georesources & Geotechnology》2016,34(3):280-292

In this artice, the influence of clay content on the wave-induced liquefaction in marine sediments was reported. The one-dimensional (1-D) equipment was setup with a vertical cylinder and 1.8–m–thick clayey sandy deposit and 0.2–m–thick water above the deposit. Unlike the previous experimental study for a single soil layer, this study used sand-kaolin mixtures, sand-illite mixtures, and sand-bentonite mixtures as the experimental samples. A series of experiments with 3,000 wave cycles in each test were conducted under numerous wave and soil conditions, which allowed us to examine the influence of clay content (CC) on wave-induced liquefaction in marine sediments. The experimental results showed that the clayey sandy deposit will become prone to liquefaction with the increase of CC when CC is less than a critical value, which depends on the type of clay. However, when CC is greater than the critical value, liquefaction depth will decrease as CC increases. Furthermore, when the CC value reaches a certain level, liquefaction will not occur. For example, no liquefaction occurs when CC ≥ 33% for both kaolin-sand and illite-sand mixtures and CC ≥ 16.36% for bentonite-sand mixtures.  相似文献   

Evaluation of Effective Depth of PVD Improvement in Soft Clay Deposit: A Field Case Study     

Jun Chen  Zhen-Yu Yin  Ye-Shuang Xu  Suksun Horpibulsuk 《Marine Georesources & Geotechnology》2016,34(5):420-430

This article presents a case history of determination of effective depth of prefabricated vertical drains (PVDs) under embankment loading on a very soft clay deposit in central China, near Jiujiang, Jiangxi Province. The height of the embankment was 5.3 m and construction time was about one year. The PVDs were installed to a depth of 8.5 m at a spacing of 1.5 m in a triangular pattern. Field observations and the finite element method (FEM) were employed to analyze the performance of the soft deposit during embankment construction. The influential depth of the embankment loading was evaluated based on settlement, excess pore pressure, and stress increase in subsoil, both from the observed data and FEM analysis. The effective PVD depth was determined in the following ways: (1) the depth of 5% subsoil settlement of surface settlement; (2) vertical stress increase in subsoil of 25% in-situ stress; and (3) consolidation time/PVD depth relation by FEM. Based on the analysis, the effective depth of PVDs was determined to be between 10 and 12.8 m for this field case.  相似文献