直达波法测定整板基础砼强度     

周全  谌和平 《江西地质》1998,12(1):68-69

本文以某工程为例,介绍了直达波法测定整板基础砼强度的技术方法;其结果可避免以往回弹法测量结果离散度较大而引起的争议。  相似文献   

岩体不连续间距数学模型的一个修正函数     

陈枫  孙宗颀 《工程地质学报》1998,6(2):150-154

不连续间距对岩体性质具有十分重要的意义。基于无限长测量线得到的岩体不连续间距的负幂指数分布是最重要的一种概率分布密度, 为纠正因用有限长测量线而带来的不连续间距的分布误差, 本文提出了一个封闭形式的修正函数。结果表明, 该法可显著减少不连续间距的相对误差, 从而可以采用较短的测量线来测量岩体的不连续间距。  相似文献   

Problems in the calibration of an acoustic device for the observation of bedload transport     

K. S. Richards  L. M. Milne 《地球表面变化过程与地形》1979,4(4):335-346

Developments in theoretical and empirical modelling of bedload transport processes are hindered by the lack of an adequate data base for testing or establishing the models. Conventional methods of measuring bedload transport rates fail to provide the necessary continuous or frequent record of variations at a single section. Acoustic techniques have the potential to overcome this deficiency, but their application has been very limited. Some of the problems of calibrating an acoustic device in the field and in a laboratory flume are discussed, and a possible circuit design described which might minimize calibration difficulties by automatically subtracting the noise generated by flow turbulence.  相似文献   

NEAR-FAULT DISPLACEMENT AND DEFORMATION OBTAINED FROM ONE-KILOMETER-LONG FAULT-CROSSING BASELINE MEASUREMENTS-A PRELIMINARY EXPERIMENT AT 2 SITES ON THE EASTERN BOUNDARY OF THE SICHUAN-YUNNAN BLOCK          下载免费PDF全文

CAO Jian-ling  ZHANG Jing  WEN Xue-ze  FENG Wei  SHI Yao-lin 《地震地质》1979,42(3):612-627

The current and conventional fault-crossing short baseline measurement has a relatively high precision, but its measurement arrays usually fail to or cannot completely span major active fault zones due to the short length of the baselines, which are only tens to 100 meters. GNSS measurement has relatively low resolution on near-fault deformation and hence is not suitable for monitoring those faults with low motion and deformation rates, due to sparse stations and relatively low accuracy of the GNSS observation. We recently built up two experimental sites on the eastern boundary of the active Sichuan-Yunnan block, one crossing the Daqing section of the Zemuhe Fault and the other crossing the Longshu section of the Zhaotong Fault, aiming to test the measurement of near-fault motion and deformation by using fault-crossing arrays of one-kilometer-long baselines. In this paper, from a three-year-long data set we firstly introduce the selection of the sites and the methods of the measurement. We then calculate and analyze the near-field displacement and strain of the two sites by using three hypothetical models, the rigid body, elastic and composed models, proposed by previous researchers. In the rigid body model, we assume that an observed fault is located between two rigid blocks and the observed variances in baseline lengths result from the relative motion of the blocks. In the elastic model, we assume that a fault deforms uniformly within the fault zone over which a baseline array spans, and in the array baselines in different directions may play roles as strainmeters whose observations allow us to calculate three components of near-fault horizontal strain. In the composed model, we assume that both displacement and strain are accumulated within the fault zone that a baseline array spans, and both contribute to the observed variances in baseline lengths. Our results show that, from the rigid body model, variations in horizontal fault-parallel displacement component of the Zemuhe Fault at the Daqing site fluctuate within 3mm without obvious tendencies. The displacement variation in the fault-normal component keeps dropping in 2015 and 2016 with a cumulative decrease of 6mm, reflecting transverse horizontal compression, and it turns to rise slightly(suggesting extension)in 2017. From the elastic model, the variation in horizontal fault-normal strain component of the fault at Daqing shows mainly compression, with an annual variation close to 10^-5, and variations in the other two strain components are at the order of 10^-6. For the Longshu Fault, the rigid-body displacement of the fault varies totally within a few millimeters, but shows a dextral strike-slip tendency that is consistent with the fault motion known from geological investigation, and the observed dextral-slip rate is about 0.7mm/a on average. The fault-parallel strain component of the Longshu Fault is compressional within 2×10^-6, and the fault-normal strain component is mainly extensional. Restricted by the assumption of rigid-body model, we have to ignore homolateral deformation on either side of an observed fault and attribute such deformation to the fault displacement, resulting in an upper limit estimate of the fault displacement. The elastic model emphasizes more the deformation on an observed fault zone and may give us information about localizations of near-fault strain. The results of the two sites from the composed model suggest that it needs caution when using this model due to that big uncertainty would be introduced in solving relevant equations. Level surveying has also been carried out at the meantime at the two sites. The leveling series of the Daqing site fluctuates within 4mm and shows no tendency, meaning little vertical component of fault motion has been observed at this site; while, from the rigid-body model, the fault-normal motion shows transverse-horizontal compression of up to 6mm, indicating that the motion of the Zemuhe Fault at Daqing is dominantly horizontal. The leveling series of the Longshu site shows a variation with amplitude comparable with that observed from the baseline series here, suggesting a minor component of thrust faulting; while the baseline series of the same site do not present tendencies of fault-normal displacement. Since the steep-dip faults at the two sites are dominantly strike-slip in geological time scale, we ignore probable vertical movement temporarily. In addition, lengths of homolateral baselines on either side of the faults change somewhat over time, and this makes us consider the existence of minor faults on either side of the main faults. These probable minor faults may not reach to the surface and have not been identified through geological mapping; they might result in the observed variances in lengths of homolateral baselines, fortunately such variations are small relative to those in fault-crossing baselines. In summary, the fault-crossing measurement using arrays with one-kilometer-long baselines provides us information about near-fault movement and strain, and has a slightly higher resolution relative to current GNSS observation at similar time and space scales, and therefore this geodetic technology will be used until GNSS networks with dense near-fault stations are available in the future.  相似文献   

Upper mantle structure of the Apulian plate from Rayleigh waves     

G. Calcagnile  G. F. Panza 《Pure and Applied Geophysics》1980,118(2):823-830

Phase velocities of Rayleigh waves for the Adriatic Sea area are obtained in the period range 25–190 sec along the path (l'Aquila-Trieste) AQU-TRI and 20–167 sec along the path (Trieste-Bari) TRI-BAI.The phase velocities are systematically higher than the known values for the surrounding regions. The data inversion indicates the presence of a lithosphere typical of stable continental areas with clear high-velocity lid (V _s 4.6 km/sec) overlying a well developed low velocity zone (V _s 4.2 km/sec).P. F. Geodinamica C.N.R., Roma Pubbl. N. 189.  相似文献   

The solitary waves of the barotropic quasi-geostrophic model with the large-scale orography     

Chen Jiong  Liu Shikuo 《大气科学进展》1998,15(3):404-411

Starting from a modified barotropic quasi-geostrophic model equation, considering the actual situation of the large-orography of the Tibetan Plateau, neglecting its slope in x direction, and using the reductive perturbation method, then the solitary waves are obtained. The results show that the orography is essential factor exciting solitary Rossby waves in a flow without shear.  相似文献   

数值预报产品动力-统计释用方法与寒潮预报   总被引：1，自引：0，他引：1  

陈静  桑志勤 《气象》1998,24(2):34-38

从气温变化的物理过程出发,设计了一种数值预报产品的动力－统计释用方法,开发了一套四川盆地寒潮入侵时间和降温幅度的释用方案,并利用ＥＣＭＷＦ产品建立四川盆地寒潮自动预报系统,滚动预报未来１～６日内的寒潮过程。１９９５～１９９７年投入中短期业务运行,取得了显著效果。  相似文献   

THE INFLUENCE OF PHOTOCHEMICAL PROCESS ON THE ATMOSPHERIC WAVE^*          下载免费PDF全文

Xu Jiyao  Wang Yingjian 《Acta Meteorologica Sinica》1998,12(4):459-462

The time damping rate of gravity wave in the range of 30-70 km is calaclated in three circumstances:(1) adiabatic process,(2) diabatic process caused by atmospheric cooling,and(3) diabatic process resulting from atmospheric photochemical heating and cooling.The results indicate that the photochemical heating is as important as Newtonian cooling and its contribution to the time damping rate of gravity wave can not he negligible.  相似文献   

THE INFLUENCE OF PHOTOCHEMICAL PROCESS ON THE ATMOSPHERIC WAVE     

徐寄遥  王英鉴 《Acta Meteorologica Sinica》1998,(4)

The time damping rate of gravity wave in the range of 30-70 km is calaclated in threecircumstances:(1)adiabatic process,(2)diabatic process caused by atmospheric cooling,and(3)diabatic process resulting from atmospheric photochemical heating and cooling.The resultsindicate that the photochemical heating is as important as Newtonian cooling and its contribution tothe time damping rate of gravity wave can not he negligible.  相似文献   

机载成像光谱仪的外定标方法          下载免费PDF全文

张玉香  张广顺 《应用气象学报》1998,9(4):485-491

该文描述了基于反射率方法的机载中分辨率成像光谱仪（AMODIS）外定标方法。可见光和近红外波段的17个通道定标结果表明,成像光谱仪两个飞行高度测值的外定标系数是非常吻合的,其相对差为0.19%～3.89%;成像光谱仪关于草地航测的反演值与地面实测值比较,结果也是比较接近的。  相似文献