海上油田开发井钻井优化设计和应用实践          下载免费PDF全文

董振国  熊伟  龚长芳  李进宏 《探矿工程》2021,48(7):46-57

LF7-2油田位于我国南海珠江口盆地LF区块,是一个小规模油田,根据前期探井揭示,上部地层以厚层泥岩为主,极易水化、分散,使钻井液性能变差;起下钻过程中钻具遇卡、遇阻等复杂情况频繁发生;钻头选型不尽合理,易泥包;下部地层以砂泥岩互层为主,岩石致密、可钻性变差,钻具扭矩、摩阻增加,定向钻进时滑动困难,井眼轨迹控制难度大,给钻井提速增效带来诸多困难。根据探井地质情况和岩石力学剖面,利用钻井软件优选平台位置,对开发井井身结构、井眼轨迹、钻柱力学、钻井液、固井等方面进行钻井仿真模拟,制定出科学的钻井设计方案,在直井段采用“牙轮钻头+直螺杆+MWD”钻具开展防斜打直,造斜段使用“PDC钻头+弯螺杆+MWD/LWD”开展复合钻井,水平段采用“PDC钻头+PowerDriver+MWD/LWD”开展旋转导向钻井,实现精准化钻井,顺利完成6口开发井施工。现场应用单井平均机械钻速29.43 m/h,钻井工期191.59 d,工期比设计提前28.41 d,钻井提速增效显著,降低开发成本。通过PowerDriver的近钻头井斜、自然伽马实时测量和传输,减少地质误判,实现对储层顶界面的实时探测,使储层钻遇率达100%,收到较好的经济效益和投资回报,实现小油田的效益开发。  相似文献   

白涧铁矿南区复杂地层钻探施工技术          下载免费PDF全文

李红梅  石逊 《探矿工程》2021,48(11):30-35

邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。  相似文献   

复合动力钻进工艺在干热岩钻井中的应用研究          下载免费PDF全文

谭现锋  马哲民  段隆臣  刘肖  李颖  郭明义 《探矿工程》2021,48(7):1-8

2011年山东省地矿局在山东省利津县实施了国内第一个干热岩调查评价项目,采用转盘回转钻进,但钻效低、能耗高。为提高在高温硬岩条件下的钻进效率、缩短钻井周期、降低生产成本,2015年在福建省漳州市实施的中国地质调查局东南沿海深部地热HDR-1干热岩科学钻探工程井（井深4000.86 m,孔底温度109 ℃）和2017年在青海省共和县完成的GR1干热岩科学勘探井（井深3705 m,孔底温度236 ℃）,在施工中均探索使用了“转盘+螺杆钻具”复合钻进工艺,并在高温取心段首次测试应用了“转盘+涡轮钻具”复合取心钻进工艺,取得了良好的效果并就下一步研究方向提出了意见和建议,为螺杆钻具和涡轮钻具的深入研究提供了宝贵的高温施工经验,也将为我国干热岩科学钻探与深部地热资源勘探提供新的技术支撑。  相似文献   

进口爆破孔钻机配套钻塔的研制          下载免费PDF全文

张西坤  宋秋锋  申寿长  刘大仲  浦静怡  曹继玉  魏少军 《探矿工程》2021,48(6):80-86

进口DMH90型爆破孔钻机配套钻塔整体性强,起落塔快捷方便,钻塔高度满足不换杆一次成孔,即钻塔有效高度略大于钻孔深度,承受振动冲击力大,施工工作环境恶劣。基于这些特点和难点,爆破塔长期依赖进口,导致成本增高、周期加长,为此进行了进口DMH90型爆破孔钻机配套钻塔的替代进口研究工作。本文介绍了DMH90型爆破孔钻机配套ZT27-45型爆破孔钻塔的研制过程,主要对ZT27-45型爆破孔钻塔的设计要点、结构型式、塔体选材、焊接工艺、防止变形、消除应力、质量检验等方面进行了探索、试验和总结。生产施工实践表明,ZT27-45型钻塔制造质量达到了设计要求,满足爆破孔施工的需要,实现了替代进口,达到了降低成本、缩短工期和提高机械性能的目的。  相似文献   

固体矿产绿色勘查钻探技术方法探索与实践          下载免费PDF全文

刘蓓  杨可  张晨  顾科伟  皮健伟  段晓 《探矿工程》2021,48(S1):39-46

西安矿产资源调查中心针对现有固体矿产地质调查（勘查）项目,积极探索和实践绿色地质勘查工作技术方法,因地制宜应用全液压履带钻机、便携式模块化钻机实施“一基多孔”,采用背包钻实施“以钻代槽”,通过优选环保型冲洗液,净化处理废弃冲洗液,控制临时占地规模等具体措施。与传统机场规格相比占地面积减少了80%~85%,临时便道修筑减少了60%~65%,工后复垦复绿达到了80%以上。通过绿色勘查成本费用分析,人员、临时用地（青苗）补偿、绿色环保材料及复垦复绿等费用成本总和降低了40%左右。最后探索实践了绿色勘查工作保障措施,对下一步绿色勘查工作提出了建议,为加强绿色勘查工作理念、完善相关的制度法规、激发绿色勘查工作活力提供了积极的导向。  相似文献   

基于DBSCAN算法的孔深测量与地层反演理论研究          下载免费PDF全文

李璇  赵大军 《探矿工程》2021,48(S1):47-51

论文针对地质勘探取心工况复杂、钻进深度大、事故发生率高、岩性复杂、钻进参数难以获取、无法实时掌握钻进状态的难题,在充分调研现有工况识别技术的采集原理、功能种类、现场实测的基础上,结合钻探智能化、自动化的发展方向,运用硬件与软件结合的思想,设计了实时测量钻探参数的方案。论文首次提出使用DBSCAN（针对噪声空间基于分布密度进行聚类的算法）密度聚类法分析钻进参数,结合光电编码器增量的正负性进行工况判别,以获取钻头位置以及钻孔深度。该方案可以判别钻进状态,获取钻进工艺参数,将测量数据作为所钻地层的可钻参数来反演地层。钻机的自动化、智能化研究能获取大量地层资料,有利于推进钻进工艺学发展,实现从经验钻探到智能钻探进的突破。同时,为智能钻进系统奠定基础。  相似文献   

Trend detection in river flow series: 1. Annual maximum flow / Détection de tendance dans des séries de débit fluvial: 1. Débit maximum annuel     

《水文科学杂志》2013,58(5)

Abstract

Results of a study on change detection in hydrological time series of annual maximum river flow are presented. Out of more than a thousand long time series made available by the Global Runoff Data Centre (GRDC) in Koblenz, Germany, a worldwide data set consisting of 195 long series of daily mean flow records was selected, based on such criteria as length of series, currency, lack of gaps and missing values, adequate geographical distribution, and priority to smaller catchments. The analysis of annual maximum flows does not support the hypothesis of ubiquitous growth of high flows. Although 27 cases of strong, statistically significant increase were identified by the Mann-Kendall test, there are 31 decreases as well, and most (137) time series do not show any significant changes (at the 10% level). Caution is advised in interpreting these results as flooding is a complex phenomenon, caused by a number of factors that can be associated with local, regional, and hemispheric climatic processes. Moreover, river flow has strong natural variability and exhibits long-term persistence which can confound the results of trend and significance tests.  相似文献   

Pulse generation models for daily intermittent streamflows / Modèles de génération d’impulsions pour des débits journaliers intermittents     

《水文科学杂志》2013,58(3)

Abstract

Abstract Generating pulses and then converting them into flow are two main steps of daily streamflow generation. Three pulse generation models have been proposed on the basis of Markov chains for the purpose of generating daily intermittent streamflow time series in this study. The first one is based on two two-state Markov chains, whereas the second uses a three-state Markov chain. The third model uses harmonic analysis and fits Fourier series to the three-state Markov chain. Results for a daily intermittent streamflow data series show a good performance of the proposed models.  相似文献   

Flood forecasting and infiltration modeling/Prévision de crue et modélisation de l’infiltration     

《水文科学杂志》2013,58(2)

Abstract

Abstract The role of accuracy in the representation of infiltration on the effectiveness of real-time flood forecasting models was investigated. A simple semi-distributed model of conceptual type with adaptive estimate of hydraulic characteristics included in the infiltration component was selected. Infiltration was described by a very accurate approach recently formulated for complex rainfall patterns, or alternatively through a simpler formulation known as an extension of the classical time compression approximation. The results indicated that, for situations involving a significant rainfall variability in space, the inaccuracy in the representation of infiltration cannot be corrected by the adaptive component of the rainfall–runoff model. A preliminary analysis of the role of an approximation of saturated hydraulic conductivity to be used in each homogeneous area of the semi-distributed model used both in non-adaptive version and in real-time is also presented.  相似文献   

An inexpensive and portable drill rig for bedrock groundwater studies in headwater catchments     

C. P. Gabrielli  J. J. McDonnell 《水文研究》2012,26(4):622-632

Bedrock groundwater dynamics in headwater catchments are poorly understood and poorly characterized. Here, we present an inexpensive and portable bedrock drilling system designed for use in remote locations. Our system is capable of drilling bedrock wells up to 11 m deep and 38 mm in diameter in a wide range of bedrock types. The drill consists of a lawn mower engine adapted to rotate a diamond tipped coring bit, a small water pump to cool and flush the drill bit and a scaffolding platform for stable footing on steep slopes. The complete drilling assembly costs under $ 2000 USD. Here, we show proof‐of‐concept of our approach with 40 successful wells drilled in different geological substrates, including a conglomerate at the Maimai experimental catchment in New Zealand, volcanic breccias at the HJ Andrews experimental watershed in Oregon, USA, sandstone and siltstone at the Alsea watershed in Oregon, USA, and basalt at the Los Gavilanes experimental watershed in Veracruz, Mexico. We also present a transparent comparison between our design and other portable bedrock drilling systems and outline the strengths and weaknesses of each system. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献