Effects of supplemental viscous damping on seismic response of asymmetric-plan systems     

Rakesh K. Goel 《地震工程与结构动力学》1998,27(2):125-141

Coupling between lateral and torsional motions may lead to much larger edge deformations in asymmetric-plan systems compared to systems with a symmetric plan. Supplemental viscous damping has been found to be effective in reducing deformations in the symmetric-plan system. This investigation examined how supplemental damping affects the edge deformations in asymmetric-plan systems. First, the parameters that characterize supplemental viscous damping and its plan-wise distribution were identified, and then the effects of these parameters on edge deformations were investigated. It was found that supplemental damping reduces edge deformations and that reductions by a factor of up three are feasible with proper selection of system parameters. Furthermore, viscous damping may be used to reduce edge deformations in asymmetric-plan systems to levels equal to or smaller than those in the corresponding symmetric-plan system. © 1998 John Wiley & Sons, Ltd.  相似文献   

Dynamic analysis on structures base-isolated by a ball system with restoring property     

Qiang Zhou  Xilin Lu  Qingmin Wang  Dingguo Feng  Qianfeng Yao 《地震工程与结构动力学》1998,27(8):773-791

A computational model with its analysis method for base-isolated structures by a ball system with restoring property under seismic force is proposed in this paper, and the programs using numerical integration method and incremental harmonic balance method are developed. The analysis method is verified by shaking table test results of a three-storey masonry model. With these programs, the effect of some factors on the aseismic behaviour of base isolation system are analysed, and the comparison of seismic response between structures with and without base isolation is made. Results of both theory and test show that the above-mentioned base isolation system has apparent advantages over the traditional aseismic structures. © 1998 John Wiley & Sons, Ltd.  相似文献   

Recursive evaluation of interaction forces and property matrices from unit-impulse response functions of unbounded medium based on balancing approximation     

Antonio Paronesso  John P. Wolf 《地震工程与结构动力学》1998,27(6):609-618

Starting from the unit-impulse response matrix of the unbounded medium, a discrete-time formulation permitting the recursive evaluation of the interaction forces and a continuous-time formulation yielding property matrices corresponding to a model with a finite number of degrees of freedom are discussed. This is achieved using the balancing approximation method which is easily automated, guarantees stability and leads to highly accurate results. © 1998 John Wiley & Sons Ltd.  相似文献   

Amplification of SH waves by an orthotropic basin     

Tao Zheng  Marijan Dravinski 《地震工程与结构动力学》1998,27(3):243-257

Scattering of elastic waves by an orthotropic sedimentary basin is investigated for antiplane strain model using an indirect boundary integral equation approach. Both steady state and transient response were obtained for semicircular and semielliptical basins with different material properties. The results indicate that the basin geometry and the impedance contrast between the half-space and the basin have similar effects on the surface ground motion amplification as for the isotropic case. However, the material anisotropy may change significantly the fundamental resonant frequencies of the basin, resulting in different surface displacement amplification patterns. In addition, it was observed that the arrival time of the main disturbance on the surface strongly depends on material anisotropy for different angles of incidence. The results demonstrate that material anisotropy may be very important in explaining surface ground motion amplification for sedimentary basins. © 1998 John Wiley & Sons, Ltd.  相似文献   

Optimal instrumentation of uncertain structural systems subject to earthquake ground motions     

Ernesto Heredia-Zavoni  Luis Esteva 《地震工程与结构动力学》1998,27(4):343-362

A criterion is proposed for making decisions regarding the optimal location of a given number of sensors to record the seismic response of a structure for identification purposes. The optimal location of the sensors is selected so that the expected value of a Bayesian loss function, expressed in terms of the Fisher information in the recordings, is minimized. The criterion is applied to the case of multi-degree-of-freedom systems with uncertain structural properties subjected to earthquake ground motions modelled as stationary stochastic processes. The use and capabilities of the criterion are thoroughly illustrated by means of an example. Results are used to assess the influence of record duration, recording noise, and ground motion frequency content and amplitude, on the optimal location of accelerometers as well as on the reduction of prior uncertainty about the structural parameters. © 1998 John Wiley & Sons, Ltd.  相似文献   

Damage localization and quantification of earthquake excited RC-frames     

P. S. Skjrbk  S. R. K. Nielsen  P. H. Kirkegaard  A. . akmak 《地震工程与结构动力学》1998,27(9):903-916

In the paper a recently proposed method for damage localization and quantification of RC-structures from response measurements is tested on experimental data. The method investigated requires at least one response measurement along the structures and the ground surface acceleration. Further, the two lowest time-varying eigenfrequencies of the structure must be identified. The data considered are sampled from a series of three RC-frame model tests performed at the structural laboratory at Aalborg University, Denmark during the autumn of 1996. The frames in the test series were exposed to two or three series of ground motions of increasing magnitude. After each of these runs the damage state of the frame was examined and each storey of the frame were classified into one of the following six classifications: undamaged, cracked, lightly damaged, damaged, severely damaged or collapse. During each of the ground motion events the storey accelerations were measured by accelerometers. After application of the last earthquake sequence to the structure the frames were cut into pieces and each of the beams and columns was statically tested and damage assessment was performed using the obtained stiffnesses. The damage in the storeys determined by the suggested method was then compared to the damage classification from the visual inspection as well as the static tests. It was found that especially in the cases where the damage is concentrated in a certain area of the structure a very good damage assessment is obtained using the suggested method. © 1998 John Wiley & Sons, Ltd.  相似文献   

Torsional mechanisms in ductile building systems     

T. Paulay 《地震工程与结构动力学》1998,27(10):1101-1121

It is postulated that in order to estimate torsional effects on the seismic response of ductile building structures, the associated plastic mechanism to be developed in the three-dimensional system should be identified. The proposed approach is very different from that embodied in building codes. Inelastic structures are classified as either torsionally unrestrained or restrained. It is shown that clearly defined mechanisms that are to be mobilized, enable the acceptable system ductility demand to be estimated. This should ensure that the corresponding demands imposed on critical translatory elements of the system do not exceed their established displacement ductility capacity. To this end familiar quantities, such as element yield displacement and stiffness, are redefined. Comparisons are made of the intents of existing codified design approaches and those emphasising the role of imposed inelastic displacements. A simple treatment of the consequences of earthquake-induced inelastic skew displacements is also addressed. The primary aim of the paper is to offer very simple concepts, based on easily identifiable plastic mechanisms, to be utilized in structural design rather than advancement in analyses. Detailed design applications of these concepts are described elsewhere. The approach is an extension of the deterministic philosophy of capacity design, now used in some countries. © 1998 John Wiley & Sons, Ltd.  相似文献   

一种海生单细胞蓝藻的氢酶特点和功能探讨   总被引：1，自引：0，他引：1  

戴和平  张宪孔 《海洋科学》1989,13(1):11-15

  相似文献   

HY-1A卫星COCTS数据条带消除的两种定量化方法比较   总被引：1，自引：1，他引：1  

牛生丽  唐军武  蒋兴伟  郭茂华  宋庆君 《遥感学报》2007,11(6):860-867

HY-1A卫星是中国第一颗海洋遥感卫星,水色水温扫描仪(COCTS)是其主要探测器。由于各探测单元的信号响应特性不同,导致COCTS数据含有大量条带噪声。这严重影响了图像的质量和可视性,对资料的定量化应用也是十分不利的。为了解决这个问题,本研究采用矩匹配及直方图匹配法,对COCTS数据进行条带消除。结果表明,两种方法都是有效的,能够在消除条带的同时保持数据原有的物理意义,并避免细节特征的丢失。但是从整体效果看,直方图匹配法更好一些。本研究的结果同样适用于其他以并扫方式获取数据的遥感器的条带消除。  相似文献   

泡沫混凝土隧道减震层减震机制   总被引：2，自引：0，他引：2  

赵武胜  陈卫忠  马少森  赵坤  宋万鹏  李灿 《岩土力学》2018,39(3):1027-1036

基于泡沫混凝土隧道减震材料,通过室内试验研究了不同密度、围压、应变率条件下泡沫混凝土材料的力学特性。试验结果表明：随着密度的增加,试样的单轴破坏形态由骨架坍塌破坏逐渐转化为劈裂剪切破坏,峰后应变软化与材料脆性增强;随着围压的增加,材料强度增加且延性增强,峰后由应变软化逐渐转换为应变硬化。在中等应变率范围内（10?5/s ～10?3/s）,随着应变率的增加,泡沫混凝土材料的强度近似呈指数增长,同时峰后残余应力增长明显,且塑性应变越大,应变率对峰后应力的影响越大。基于上述试验结果初步建立了泡沫混凝土材料的本构模型。依托嘎隆拉隧道,采用数值方法研究了减震层剪切模量、厚度及减震层-衬砌界面特性3个因素对减震效果的影响规律,相关研究成果可为高烈度区隧道工程减震层的设计提供参考。  相似文献