Parametric Vibration Analysis of Submerged Floating Tunnel Tension Legs     

SUN Sheng-nan  SU Zhi-bin  FENG Yun-fen  XU Xian-yi 《中国海洋工程》2020,(1):131-136

According to the characteristics of submerged floating tunnel anchored by tension legs,simplifying the tube as point mass and assuming that the tension leg is a nonlinear beam model hinged at both ends,the nonlinear vibration equation of the tension leg is derived.The equation is solved by the Galerkin method and Runge Kutta method.Subsequently,numerical analysis of typical submerged floating tunnel tension leg is carried out.It is shown that,the parametric vibration response of the submerged floating tunnel tension leg is related to the amplitude and frequency of the end excitation.Without considering axial resonance and transverse resonance,it is reasonable that higher order modes are abandoned and only the first three modes are considered.The axial resonance amplitude of the second or third order mode is equivalent to the first order mode axial resonance amplitude,which should not be ignored.  相似文献   

钢管脐带缆扭转平衡设计     

牛学超  祝庆斌  潘盼  邵鹏进  胡明  谢书鸿 《海洋工程》2020,38(6):151-157

钢管脐带缆包含多种螺旋缠绕的功能单元，其在外力载荷下会发生相对运动，而且钢管的刚度较大对扭转平衡有重要影响，因此，相对于普通电缆，钢管脐带缆在扭转平衡设计时更加困难。根据扭转平衡理论公式，采用控制变量法，以第二层铠装钢丝的绞合角度为变量进行扭转平衡设计。首先建立脐带缆缆芯有限元模型，对其施加拉伸载荷，结果显示缆芯出现了扭转，这证明不能将脐带缆缆芯视为一实心圆柱。其次建立不同绞合角度的脐带缆有限元模型，设置各功能单元的材料属性和摩擦系数，分析模型在拉伸载荷下的扭转角度，并将相同拉伸载荷下的扭转角度拟合为直线，从而得到钢管脐带缆在扭转平衡状态时的最优绞合角度。最后，采用试验方法对实物钢管脐带缆进行扭转平衡测试，测试结果显示在拉伸载荷下脐带缆单位长度扭转角度十分微小，这表明缆是扭转平衡的。因此验证了使用的有限元方法在钢管脐带缆扭转平衡设计中的有效性。  相似文献   

Micromechanical approach to swelling behavior of capillary-porous media with coupled physics     

Mahdad Eghbalian  Mehdi Pouragha  Richard Wan 《国际地质力学数值与分析法杂志》2019,43(1):353-380

A detailed multiscale analysis is presented of the swelling phenomenon in unsaturated clay-rich materials in the linear regime through homogenization. Herein, the structural complexity of the material is formulated as a three-scale, triple porosity medium within which microstructural information is transmitted across the various scales, leading ultimately to an enriched stress-deformation relation at the macroscopic scale. As a side note, such derived relationship leads to a tensorial stress partitioning that is reminiscent of a Terzaghi-like effective stress measure. Otherwise, a major result that stands out from previous works is the explicit expression of swelling stress and capillary stress in terms of micromechanical interactions at the very fine scale down to the clay platelet level, along with capillary stress emerging due to interactions between fluid phases at the different scales, including surface tension, pore size, and morphology. More importantly, the swelling stress is correlated with the disjoining forces due to electrochemical effects of charged ions on clay minerals and van der Waals forces at the nanoscale. The resulting analytical expressions also elucidate the role of the various physics in the deformational behavior of clayey material. Finally, the capability of the proposed formulation in capturing salient behaviors of unsaturated expansive clays is illustrated through some numerical examples.  相似文献   

一种快速测定表面张力的简易办法     

陈泉水 《江西地质》2001,15(1):61-63

本文介绍一种快速测定液体表面张力的自制简易装置，利用该简易装置和表面张力的标准测定仪器－界面张力仪分别对几种纯液体和溶液进行了对比实验，结果表明，该简易法的实验条件比较简单，实验数据容易测准，是一种简便实用的表面张力测定方法。  相似文献   

古田溪一级大坝变形观测系统改造及自动化设计     

龚玉珍  邵有清 《四川测绘》1996,19(4):151-156

本文介绍了古田汉一级大坝原有变形观测项目及存在的主要问题，提出了观测系统改造的原则和要求。详细论述了各观测项目增设、改造及自动化设计的实施方案，给出了相应的精度估算。  相似文献   

高层隔震建筑设计中隔震支座受拉问题分析   总被引：11，自引：0，他引：11  

程华群  刘伟庆  王曙光 《地震工程与工程振动》2007,27(4):161-166

高层建筑由于高宽比相对较大,倾覆效应明显,当采用隔震技术时,有可能使隔震支座出现拉应力,而通常使用的叠层橡胶隔震支座抗拉能力不强。因此,隔震支座受拉问题成为隔震技术在高层建筑中推广应用的主要障碍之一。本文提出了避免隔震支座受拉的上部结构布置原则及隔震层优化设计方法,并对目前隔震支座拉应力计算方法提出了改进建议。本文的研究工作可为工程设计提供借鉴,为隔震设计相关规范的修订提供依据。  相似文献   

桩网复合地基桩土应力比的确定     

陈娟  吴西臣 《水文地质工程地质》2007,34(3):116-119

实践证明,桩网复合地基同时具备竖向增强体复合地基与水平向增强体复合地基的加固优点,能很好地提高地基土体承载力,减小不均匀沉降,特别是桥头过渡段地基处理中能有效控制“桥头跳车”现象的产生。本文主要对桩网复合地基的加固机理进行分析,并结合自然平衡拱理论和加筋垫层拉膜效应理论推导出路堤下桩网复合地基桩土应力比计算公式,同时分析了各设计参数变化对桩土应力比的变化规律。工程实体试验表明,本文所推导的桩土应力比计算公式具有较好的适用性。  相似文献   

Lagrangian meshfree particles method (SPH) for large deformation and failure flows of geomaterial using elastic–plastic soil constitutive model     

Ha H. Bui  Ryoichi Fukagawa  Kazunari Sako  Shintaro Ohno 《国际地质力学数值与分析法杂志》2008,32(12):1537-1570

Simulation of large deformation and post‐failure of geomaterial in the framework of smoothed particle hydrodynamics (SPH) are presented in this study. The Drucker–Prager model with associated and non‐associated plastic flow rules is implemented into the SPH code to describe elastic–plastic soil behavior. In contrast to previous work on SPH for solids, where the hydrostatic pressure is often estimated from density by an equation of state, this study proposes to calculate the hydrostatic pressure of soil directly from constitutive models. Results obtained in this paper show that the original SPH method, which has been successfully applied to a vast range of problems, is unable to directly solve elastic–plastic flows of soil because of the so‐called SPH tensile instability. This numerical instability may result in unrealistic fracture and particles clustering in SPH simulation. For non‐cohesive soil, the instability is not serious and can be completely removed by using a tension cracking treatment from soil constitutive model and thereby give realistic soil behavior. However, the serious tensile instability that is found in SPH application for cohesive soil requires a special treatment to overcome this problem. In this paper, an artificial stress method is applied to remove the SPH numerical instability in cohesive soil. A number of numerical tests are carried out to check the capability of SPH in the current application. Numerical results are then compared with experimental and finite element method solutions. The good agreement obtained from these comparisons suggests that SPH can be extended to general geotechnical problems. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

离散位场数据格网化方法探讨   总被引：1，自引：0，他引：1  

方杨 《测绘信息与工程》2009,34(6):46-48

针对均衡异常数据,比较分析了连续曲率张力样条方法、最小曲率方法和Shepard方法,结果表明张力样条方法解的全局效果较好。  相似文献   

Cr^3＋在改善三元复合驱中的作用实验研究     

任艳滨  卢祥国  赵兰兰  张运来 《海洋地质译丛》2008,(4):50-54

在三元复合驱矿场应用实践中,由于三元复合体系自身流度控制能力的局限性,必须通过聚合物凝胶前置段塞来改善吸液剖面,这就涉及到聚合物凝胶与三元复合体系的配伍性。通过向三元复合体系中加入有机铬,考察Cr^3＋对三元复合体系黏度、界面张力和阻力系数等性能影响,进而对Cr^3＋聚合物凝胶与三元复合体系配伍性以及Cr^3＋在改善三元复合体系性能方面的作用做出评价。结果表明,Cr^3＋的加入对三元复合体系黏度和界面张力影响不大,但阻力系数和残余阻力系数却明显增加。当采用Cr^3＋聚合物凝胶作为前置段塞或采用添加Cr^3＋的三元复合体系进行复合驱油实验时,其采收率增加幅度都要高于普通三元复合驱。这不仅显示出Cr^3＋聚合物凝胶与三元复合体系间良好的配伍性,而且为改善三元复合驱增油效果提供了新的途径。  相似文献