Determination of historical emission of heavy metals into the atmosphere: Celje case study     

Gorazd Žibret 《Environmental Geology》2008,56(1):189-196

The research shows that in the Celje area (Slovenia), the historical anthropogenical emissions are 1,712 tons of Zn and 9.1 tons of Cd. For Zn, this value represents approximately 0.3% of the total Zn production in that area. Close to the former zinc smelting plant, the “Zn precipitation” has been estimated to be up to 0.036 mm. The 100-year Zn production left behind a heavily contaminated area with maximum concentrations of Zn of up to 5.6% in attic dust and 0.85% in the soil, and 456 mg/kg of Cd in attic dust and 59.1 mg/kg in the soil. The calculation of historical emissions is based on the data of heavy metals concentration in the attic dust at 98 sampling points and on the data from 19 measurement sites of the weight of total monthly air deposit. The main idea behind determining past emissions is that when the weight of the deposited dust on a small area is multiplied by the concentration of the element in that area, the mass of the polluter which has been transported to the place of interest by air can be calculated. If we sum up all the weight over the whole geochemical anomaly, we get the quantity of historical emissions.  相似文献   

Flood hazard delineation combining geomorphological and hydrological methods: an example in the Northern Iberian Peninsula   总被引：2，自引：1，他引：1  

J. Lastra  E. Fernández  A. Díez-Herrero  J. Marquínez 《Natural Hazards》2008,45(2):277-293

Flood mapping requires the combination and integration of geomorphological and hydrological-hydraulic methods; however, despite this, there is very little scientific literature that compares and validates both methods. Two types of analysis are addressed in the present article. On the one hand, maps of flood plains have been elaborated using geomorphological evidence and historical flood data in the mountainous area of northwestern Spain, covering an area of more then 232 km² of floodplains. On the other hand, a hydrometeorological model has been developed (Clark semidistributed unit hydrograph) in the Sarria River basin (155 km², NW Spain). This basin is not gauged, hence the model was subjected to a goodness-of-fit test of its parameter (curve number) by means of Monte Carlo simulation. The peak flows obtained by means of the hydrological model were used for hydraulic modeling (one-phase, one-dimensional and steady flow) in a 4 km² urban stretch of the river bed. The delineation of surface areas affected by floods since 1918, as well as those analyzed subsequent to the geomorphological study, reveals a high degree of reliability in the delineation of the flooded areas with frequent recurrence intervals (<50 years). If we compare these flooded surface areas with the estimate obtained by the hydrological-hydraulic method we can see that the latter method overestimates the extent of the surface water by 144% for very frequent recurrence intervals (>10 years) and underestimates it as the recurrence interval increases, by up to 80% less floodplain for exceptional events (>500 years). Finally, a management map is put forth combining the most reliable results available by integrating both methods. Originally presented at the Sixth International Conference on Geomorphology.  相似文献   

Numerical modeling of tide-surge interaction along Orissa coast of India     

Prakash C. Sinha  Indu Jain  Neetu Bhardwaj  Ambarukhana D. Rao  Shishir K. Dube 《Natural Hazards》2008,45(3):413-427

The Orissa coast of India is one of the most vulnerable regions of extreme sea levels associated with severe tropical cyclones. There was extensive loss of life and property due to the October 1999 super cyclone, which devastated large part of the Orissa coast. The shallow nature of the head bay, presence of a large number of deltas formed by major rivers of Orissa such as Mahanadi and Dhamra, and high tidal range are responsible for storm surge flooding in the region. Specifically, rising and falling tidal phases influence the height, duration, and arrival time of peak surge along the coast. The objective of the present study is to evaluate the tide-surge interaction during the 1999 Orissa cyclone by using nonlinear vertically integrated numerical models. The pure tidal solution for the head bay region of the Bay of Bengal provides the initial condition for the fine resolution nested grid Orissa model. However, the feedback from the Orissa model does not affect the head bay model as the study provides a one-way interaction. Numerical experiments are performed to study the tide-surge interaction by considering various relative phases of the tidal waves with the surge-wave produced by 1999 Orissa cyclone. The comparison, although utilizing only the limited estimates of tidal data, appears adequate to assert that the principal features are reproduced correctly.  相似文献   

运用3DEEMs及荧光偏振方法研究pH、离子强度及浓度效应对腐殖酸荧光光谱特性的影响   总被引：6，自引：0，他引：6  

梅毅  吴丰昌  王立英  白英臣 《地球化学》2008,37(2):165-173

利用三维荧光激发.发射光谱(3DEEMs)及荧光偏振法研究了3例腐殖酸和1例湖泊溶解有机物(DOM)在不同腐殖酸浓度、离子强度和pH条件下的荧光光谱特性.实验结果表明,随着浓度增大,各腐殖酸样的荧光强度增大,其中垃圾渗滤液腐殖酸和Pahokee泥炭腐殖酸的荧光峰出现红移.随着浓度进一步增大,腐殖酸的荧光偏振值增大,由此推断在此浓度范围内腐殖酸由于分子间的排斥作用使其构型出现伸展.离子强度增大导致腐殖酸及阿哈湖DOM的荧光强度降低.随着氯化钾(KCI)浓度增大,Fluka腐殖酸的荧光峰A蓝移,荧光峰B的荧光偏振值出现减小,推测是由于静电中和作用使其荧光基团发生卷曲造成的.离子强度对其余腐殖酸样和阿哈湖DOM的其他荧光特性没有明显的影响.总的来说,pH值的变化对腐殖酸和湖泊DOM的荧光特征的影响是很明显的.随着pH值增大,腐殖酸和湖泊DOM的荧光强度增强.而pH值减小时,Fluka腐殖酸和Pahokee泥炭腐殖酸的荧光峰(A峰)蓝移,当pH值降到5时,Fhka腐殖酸的荧光峰突然红移到最大,随后又继续蓝移;垃圾渗滤液腐殖酸和阿哈湖DOM的荧光峰位无明显的漂移.所有样品的荧光偏振值都减小(但阿哈湖DOM的A峰变化不大),但在pHi≤5时又增大,这种现象表明随着pH值降低,腐殖酸和湖泊DOM中有机大分子发生卷曲,但在pH≤5时由于羧基的质子化又以平面伸展构型出现在溶液中.  相似文献   

新疆黑英山-查汗沙拉-地那达坂地区锑矿成矿远景评价   总被引：1，自引：0，他引：1  

王宏  李红  杨丽丽  沙德铭  鲍庆忠 《地质与勘探》2008,44(1):37-41

我国西天山南段的黑英山-查汗沙拉-地那达坂锑多金属矿化区为中亚南天山成矿带的东延部分,区内广泛分布有泥盆系滨浅海含碳碎屑岩和碳酸盐岩,岩石具有较高的Sb背景场,异常多呈Sb、Au、As、Hg等元素组合异常出现,异常区内已发现有查汗沙拉、阿特达坂和地那达坂等多个锑矿(点)床.区内锑矿化及异常均受近Nw向大型逆冲推覆构造系统控制,具有良好的成矿条件和较大的找矿潜力.  相似文献   

金川镍铜矿床数学模型对深部矿化变化趋势的指示     

田毓龙  把多恒  高志武  洪托  陈兴义  卢耀军 《地质与勘探》2008,44(1):82-88

按矿化特征将金川X矿区主矿体分为致密块状特富矿、海绵状富矿和浸染状贫矿.应用MicroMine软件对3类矿化体分别建立了数学模型,并应用距离平方反比法对模型单元块进行了镍、铜品位估值.通过分析和对比矿床数学模型900m至1300m不同水平剖面上的Ni、Cu品位及Ni/Cu比值的变化,得出在X矿区的中部西侧是一个Ni和Cu的矿化中心,并且向深部Cu的矿化强度高于Ni.  相似文献   

冀北万全寺银金矿床地质地球化学特征     

王宝德  牛树银  孙爱群  刘亚明  郭鹏志  孙双海 《地质与勘探》2008,44(1):15-20

万全寺银金矿床位于张宣幔枝构造东侧的侏罗纪断陷盆地中,成矿时限晚于133.33Ma～101.82 Ma.通过硫、铅、氢、氧、碳及稀有气体同位素研究认为,成矿物质应源自地球深部,在中生代冀西北幔枝构造演化过程中集中成矿.成矿热液以岩浆水为主并加入了部分天水.  相似文献   

邹平王家庄铜矿床成矿地球化学及成因探讨   总被引：2，自引：0，他引：2  

张军  徐兆文  李海勇  刘苏明  杨小男  陆现彩  李红超 《地质论评》2008,54(4):466-476

王家庄铜矿床的矿化脉石英中流体包裹体均一温度介于116 ~ 566 ℃之间,均值为 289 ℃;盐度介于7.2%～63.2% NaCleq,均值为21.1% NaCleq。流体的气相成分主要为H2O和CO2。在均一温度为240 ~ 440 ℃区间内,出现了富气相的两相水溶液包裹体、富液相的两相水溶液包裹体和含子晶的三相水溶液包裹体共存现象,以及加温后富气相包裹体均一到气相和同期富液相包裹体均一到液相的特征,表明成矿流体曾发生过沸腾作用;其中第一次发生于360 ~ 400 ℃,主要形成高温、高盐度含子晶的三相水溶液包裹体和高温、中盐度富液相的两相水溶液包裹体及高温、低盐度富气相的两相水溶液包裹体;第二次发生于240 ~ 320 ℃,主要形成高—中温、高盐度的含子晶的三相水溶液包裹体和高—中温、中盐度富液相的两相水溶液包裹体及高—中温、低盐度富气相的两相水溶液包裹体;之后主要形成富液相的两相水溶液包裹体,具有中低温和中盐度的特征。矿化脉石英中的δ18OH2O介于-1.14‰ ~ 1.79‰之间,均值为0.94‰;δD介于-63.70‰ ~ -56.50‰之间,均值为-59.8‰;说明王家庄铜矿床的成矿流体主要来源于岩浆,后期混入大气降水。矿石矿物的δ34S变化于-8.80‰ ~ -2.80‰之间,均值为-6.33‰。矿石矿物的n(206Pb)/n(204Pb)介于18.1684 ~ 18.3637之间,均值为18.2892;n(207Pb)/n(204Pb)介于155546 ~ 156342之间,均值为155777;n(208Pb)/n(204Pb)介于38.1286 ~ 38.4840之间,均值为38.2780。说明矿石具有贫重硫和富放射性成因铅的特征,硫、铅主要来源于深部,后期可能受到地壳物质或大气降水的混染。  相似文献   

西藏马攸木金矿床金银互化物的赋存状态   总被引：3，自引：0，他引：3  

孙燕  温春齐  多吉  霍艳 《地质与勘探》2008,44(5):42-46

马攸木金矿床是西藏近年发现的首例规模较大、矿石品位富、金成色高的岩金矿床.作者通过对马攸木金矿床矿石组构、矿石共生组合及矿物特征研究发现,金银互化物主要有自然金、含银自然金、银金矿、自然银.载金矿物为黝铜矿、针铁矿、脆硫锑铅矿及石英;金银互化物的赋存形式主要为包裹体金、裂隙金及粒间金.金银互化物的形成、富集与热液成矿作用及表生风化作用关系密切.  相似文献   

内蒙阿右旗铁板井镍矿矿床特征及成因探讨     

谢成连  刘蕾  冷莹莹  文中田  闫海忠 《地质与勘探》2008,44(6):27-30

铁板井绦矿床赋存于辉橄岩体中,辉橄岩体具有全岩矿化的特点,岩体及镍矿体的形成经历了三种不同的成矿过程:首先是岩浆深源液态重力分异作用,而后发生岩浆深源熔离-贯入(成岩、成矿)作用,形成岩体和镍矿体,最后在岩浆期后热液作用的叠加下完成整个成矿过程.该矿床是典型的主要由岩浆熔离作用形成的岩浆矿床.  相似文献