蒙新高原盐湖资源及盆地结构   总被引：1，自引：0，他引：1       下载免费PDF全文

胡东生 《盐湖研究》1995,3(1):10-20

通过蒙新高原典型盐湖区的解剖研究，查清了代表性盐湖盆地的相环境及其沉积建造，将盐湖盆地环境的变化形式划分为沉陷型、抬升型和改造型，并归结了盐湖盆地相环境分异与盆地地质结构之间的相互关系，为开发大陆干旱区盆地的盐湖和卤水资源及其环境演化的理论研究提供了依据。  相似文献   

A three dimensional model of muckpile formation and grade boundary movement in open pit blasting     

R. L. Yang  A. Kavetsky 《Geotechnical and Geological Engineering》1990,8(1):13-34

Summary Formulation and case studies of a three dimensional kinematic model are presented. Thein situ overburden geometry can be simulated accurately and various initiation patterns of blasts can be modelled. The overburden geometry, hole patterns and explosive distribution are all explicit model inputs. Because the effect of explosive properties, rock mass condition and inter-row delay are very difficult to measure in terms of blast performance, these are represented in the model by control parameters which are left for calibration using field data. The output of the model is a three dimensional muckpile shape of any cross section and a contour map of grade distribution within the muckpile. Two case studies are presented which have shown that the model is a valuable tool for optimizing production blasting as well as for controlling grade dilution during blasting.  相似文献   

泥湾门大桥浅海大直径嵌岩桩施工技术          下载免费PDF全文

柴云来 《探矿工程》1994,(3):28-29,31

介绍了在浅海施工直径２．２０ｍ嵌岩桩的技术问题。包括平台的搭设，用刮刀钻头与牙轮钻头钻进克取硬岩一次成孔工艺，利用冲洗液平衡原理处理浅海钻进护简断裂的成孔方法，改进浇灌清孔流程，保证浇灌质量。  相似文献   

WH-1型电镀金刚石钻头的研制及其在坚硬、致密和弱研磨性地层中的应用     

李大佛 《地球科学》1985,(3)

本文阐述了电镀金刚石孕镶钻头的研制方法和原理。此种钻头适用于坚硬、致密、弱研磨性(即所谓打滑)地层的钻进。攻克“打滑地层”的途径是:(1)降低钻头胎体耐磨性,促使金刚石出刃;(2)改变钻头底唇形状,提高金刚石破碎岩石的比压,增多孔底破碎岩石的自由面,使之易于破碎岩石。从4个钻探队、39个钻头的生产试验结果来看,上述研制工作既合理又有成效。  相似文献   

电镀金刚石钻头镀层与钢体结合强度研究     

潘秉锁  杨洋  杨凯华 《地质与勘探》2005,41(3):92-94

采用直接剪切试验,研究了稀土添加量、镀液pH值和电流密度对结合强度的影响;并结合试样断口的扫描电镜分析结果,对镀层的破坏形式进行了讨论.  相似文献   

从水流挟沙力和河槽形态规律分析黄河调水调沙   总被引：3，自引：0，他引：3  

张遂业  涂启华 《水文》2005,25(6):33-36

在分析水流挟沙力和河槽水力形态规律的基础上，研究调节流量、含沙量和泥沙组成的优化组合，解决河道输沙减淤和河槽相对稳定问题，提出调水调沙方向。达到合理利用水资源和河道减淤与治理相结合的目的．  相似文献   

打滑地层新型孕镶金刚石钻头   总被引：7，自引：0，他引：7  

罗爱云  段隆臣  王伟雄  田永常 《地质科技情报》2007,26(1):109-112

在分析打滑地层特点的基础上,指出了钻进该地层所存在的问题,提出了用于打滑地层钻进的新型孕镶金刚石钻头的设计思路,在钻头工作层中采用主、辅两种磨料,并对这两种磨料的工作机理、处理工艺以及该新型钻头的制造进行了阐述.钻头的室内钻进试验结果表明:在钻进极坚硬致密的锆刚玉时,相对于普通金刚石钻头,新型孕镶金刚石钻头的钻进时效提高1.93倍,平均磨损量增加38%,具有高时效、相对寿命长的优点,是打滑地层钻进的理想钻头.  相似文献   

基于超熵理论的泥石流危险性模糊综合评判     

麦华山  徐林荣  匡乐红 《地质灾害与环境保护》2007,18(4):62-66

泥石流灾害往往造成巨大经济损失,但由于其影响因素众多,如何合理进行危险性评判一直是研究的焦点问题.本文以研究项目为依托,选择泥石流流域沟谷的纵剖面形态指数作为流域的地貌特征指标,用超熵理论量化泥石流流域地貌系统的稳定性与演化趋势,并借助于模糊综合评判手段,对泥石流危险性进行评价.评判结果表明:该方法的评价结果与实际较为接近,为泥石流流域系统的演化趋势预测以及危险性等级划分提供了良好的分析方法.  相似文献   

Performance of a base isolator with shape memory alloy bars   总被引：1，自引：1，他引：1  

Fabio Casciati  Lucia Faravelli  Karim Hamdaoui 《地震工程与工程振动(英文版)》2007,6(4):401-408

A new and innovative base isolation device is introduced in this paper based on extensive research carried out by the authors and their co-workers. A prototype of the device was built and experimentally tested on the shaking table. The new base isolation device consists of two disks, one vertical cylinder with an upper enlargement sustained by three horizontal cantilevers, and at least three inclined shape memory alloy (SMA) bars. The role of the SMA bars is to limit the relative motion between the base and the superstructure, to dissipate energy by their super-elastic constitutive law and to guarantee the re-centring of the device. To verify the expected performance, a prototype was built and tested under sinusoidal waves of displacement of increasing frequency with different amplitudes. It is shown that the main feature of the proposed base isolation device is that for cyclic loading, the super-elastic behavior of the alloy results in wide load-displacement loops, where a large amount of energy is dissipated.  相似文献   

Shaking‐table tests on reinforced concrete frames with different isolation systems     

Mauro Dolce  Donatello Cardone  Felice C. Ponzo 《地震工程与结构动力学》2007,36(5):573-596

The effectiveness of seismic isolation in protecting structural and non‐structural elements from damage has been assessed in an extensive programme of shaking‐table tests, carried out on four identical 1/3.3‐scale, two‐dimensional, reinforced concrete (R/C) frames. Four different isolation systems were considered, namely: (i) rubber‐based, (ii) steel‐based, (iii) shape memory alloy (SMA)‐based and (iv) hybrid, i.e. based on both SMA and steel components, isolation systems. This paper presents a comprehensive overview of the main results of the experimental tests on base‐isolated models, whose structural response is described through: (i) maximum base displacements; (ii) maximum interstorey drifts; (iii) maximum storey accelerations and (iv) maximum storey shear forces. The evolution of the fundamental frequency of vibration of the R/C frame during the tests is also described. The beneficial effects of using base isolation resulted in no or slight damage, under strong earthquakes, to both structural and non‐structural members, as well as to the internal content of the building. The comparison with the experimental results obtained in shaking‐table tests on similar fixed‐base models emphasizes these positive aspects. Finally, advantages and drawbacks related to the use of each isolation system are discussed in the paper. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献