焦煤集团九里山矿14101工作面突水治理浅析     

原连成  荆冰川 《中国煤炭地质》2008,(8):35-38

通过对焦煤集团九里山矿14101工作面底板突水经过的研究,认为工作面底板突水的水源是是Lg灰岩水,其直接补给水源为L2灰岩水,间接补给水源为O2灰岩水;导水通道为底板采动裂隙带。采取了在工作面打水闸墙,利用钻孔对采空区灌注骨料,增加水流阻力,切断导水通道,封堵水源,加固隔水层的地面注浆和井下工程相结合的综合治水方案。通过观察,工作面中间巷无水流出,突水前后水位变化明显,在较短时间内获得了堵水成功。取得了显著的经济效益和社会效益,为矿井突水治理积累了经验。  相似文献   

Overbreak and underbreak in underground openings Part 2: causes and implications   总被引：7，自引：0，他引：7  

J. A. Ibarra  N. H. Maerz  J. A. Franklin 《Geotechnical and Geological Engineering》1996,14(4):325-340

Summary The newly developed light sectioning method has been used to investigate some of the causes and costs of overbreak and underbreak. Investigations at the Aquamilpa Hydroelectric Project in Mexico have shown decreased overbreak and increased underbreak as a result of increased rock quality and decreased explosive energy. A new measure of explosive energy, the perimeter powder factor (PPF), has been defined and shown to be useful in the context of tunnel-wall rock damage. Tentative results indicate that explosive energy (PPF) may be a more important factor in producing underbreak, whereas rock quality may be a greater factor in producing overbreak. A site-specific equation is given for predicting overbreak or underbreak as a function of rock quality and explosive energy, with an evaluation of the cost of underbreak and overbreak.  相似文献   

The origin of accretionary lapilli   总被引：1，自引：0，他引：1  

J. S. Gilbert  S. J. Lane 《Bulletin of Volcanology》1994,56(5):398-411

Experimental investigations in a recirculating wind tunnel of the mechanisms of formation of accretionary lapilli have demonstrated that growth is controlled by collision of liquid-coated particles, due to differences in fall velocities, and binding as a result of surface tension forces and secondary mineral growth. The liquids present on particle surfaces in eruption plumes are acid solutions stable at 100% relative humidity, from which secondary minerals, e.g. calcium sulphate and sodium chloride, precipitate prior to impact of accretionary lapilli with the ground. Concentric grain-size zones within accretionary lapilli build up due to differences in the supply of particular particle sizes during aggregate growth. Accretionary lapilli do not evolve by scavenging of particles by liquid drops followed by evaporation — a process which, in wind tunnel experiments, generates horizontally layered hemispherical aggregates. Size analysis of particles in the wind tunnel air stream and particles adhering to growing aggregates demonstrate that the aggregation coefficient is highly grain-size dependent. Theoretical simulation of accretionary lapilli growth in eruption plumes predicts maximum sizes in the range 0.7–20 mm for ash cloud thicknesses of 0.5–10 km respectively.  相似文献   

华南海西—印支期成矿地质背景          下载免费PDF全文

陈志明 《地质科学》1993,28(1):61-67

华南海西—印支成矿期内,成矿序列完整,类型齐全,矿种繁多,为其它成矿期所莫及。沉积矿床需要稳定的地质背景,层控矿床形成的较有利的地质背景是稳中有动。  相似文献   

钻孔灌注桩施工对邻近运营隧道变形影响研究     

周志良  仇欢  黄晓东  杜平  杨平  吕伟华 《岩土工程技术》2021,(1)

桩基施工将引起周边地层位移和邻近隧道结构变形,以南京龙津桥改建项目桩基工程为背景,通过现场实测,分析研究钻孔灌注桩施工全过程各工况条件对地层位移场和邻近既有隧道结构变形的影响规律。结果表明:由于钢套管的护壁作用,钻孔灌注桩施工过程中产生的最大地层位移和隧道结构变形较小,说明采用“钢套管边旋压边取土”、“群桩间跳施工”等工艺,对周围土体扰动影响程度较小,建议近隧桩基工程采用全套管灌注桩的施工方法,监测分析结果可为类似工程提供技术参考。  相似文献   

施工顺序对软土地坪复合地基的影响探讨     

魏海涛  蔡智 《岩土工程技术》2021,(1)

场地回填土与搅拌桩施工顺序将直接影响软土地坪复合地基的处理效果,其中沉降控制是影响地坪安全运行的关键。以近海软土地区工业厂房水泥土搅拌桩复合地基工程为例,探讨了复合地基水泥土搅拌桩、回填土两种不同施工顺序的影响因素及相应处理效果;通过数值模拟试验,计算分析了不同填土厚度下两种工况的地基固结总沉降、施工沉降、工后沉降。结果表明,采用“先土后桩”的施工顺序的施工期沉降大于“先桩后土”,但工后沉降大大减小,提高了软土地坪地基处理效果,有利于处理后地坪的安全运行,验证了前述分析结论,为合理设计方案的确定提供了重要的参考依据。  相似文献   

风沙起电的风洞实验研究   总被引：3，自引：0，他引：3  

张鸿发  屈建军  言穆弘 《高原气象》2002,21(4):402-407

利用大型风沙物理风洞实验装置 ,模拟铺沙地面在不同风速条件下对不同粒径的沙样和混合沙的起电电场、电位和荷质比作实验测量。结果表明 :存在风沙起电效应。风洞内电场多为负极性 ,最大电场达到 - 2 9kV·m- 1 ,导线电位可达 12 0mV。沙粒越细 ,起电越强 ,且随风速增加而增大  相似文献   

Near Wall Flow over Urban-like Roughness   总被引：3，自引：35，他引：3  

Hong Cheng  Ian P. Castro 《Boundary-Layer Meteorology》2002,104(2):229-259

In this study, comprehensive measurements over a number of urban-type surfaces with the same area density of 25% have been performed in a wind tunnel. The experiments were conducted at a free stream velocity of 10 m s^-1 and the main instrumentation was 120 ° x-wire anemometry, but measurement accuracy was checked using laser Doppler anemometry.The results haveconfirmed the strong three-dimensionalityof the turbulent flow inthe roughness sublayer and the depths of the inertial sublayer (log-law region) and roughness sublayer for each surface have been determined. Spatial averaging has been used to remove the variability of the flow in the roughness sublayer due to individual obstacles and it is shown that the spatially averaged mean velocity in the inertial sublayer and roughness sublayer can,together, be described by a single log-law with a mean zero-plane displacement and roughness length for the surface, provided that the proper surface stress is known. The spatially averaged shear stresses in the inertial sublayer and roughness sublayer are compared with the surface stress deduced from form drag measurements on the roughness elements themselves.The dispersive stress arising from the spatial inhomogeneity in the mean flow profiles was deduced from the data and is shown to be negligible compared with the usual Reynolds stresses in the roughness sublayer. Comparisons have been made between a homogeneous (regular element array) surface and one consisting of random height elements of the same total volume. Although the upper limits of the inertial sublayer for both surfaces were almost identical at equivalent fetch, the roughness sublayer was much thicker for the random surface than for the uniform surface, the friction velocity and the roughness length were significantly larger and the `roughness efficiency' was greater. It is argued that the inertial sublayer may not exist at all in some of the more extreme rough urban areas. These results will provide fundamental information for modelling urban air quality and forecasting urban wind climates.  相似文献   

Near-Wall Flow Development After A Step Change In Surface Roughness     

H. Cheng  Ian P. Castro 《Boundary-Layer Meteorology》2002,105(3):411-432

An experimental study of the initial flow field downstream of a step change in surface roughness is presented. The roughness length of the downstream surface was approximately tenfold that of the upstream roughness and, unlike all previous studies, attention was concentrated on the roughness sublayer region beneath the inertial (log-law) region. The experiments were conducted at a boundary layer Reynolds number of about 6 × 10⁴ (based on layer thickness andfree-stream velocity) and around a longitudinal location where the (downstream) roughness length, z_o2, was about 1% of the boundary-layer thickness atthe roughness change point.The thickness of the roughness sublayer was found for the two roughness. It was observed that the vertical profiles of mean velocity and turbulence characteristics started to show similarity after about 160z₀₂ downstream of the roughness change. The presence of a shear stress overshoot is shown to depend strongly on the precise location (with respect to the roughness elements) at which the measurements are made and the thickness of the equilibrium layer is shown to be very sensitive to the way it is defined. It is demonstrated that the growing equilibrium layer has first to encompass the roughness sublayer before any thickness of inertial sublayer can be developed. It follows that, in somepractical cases, like flows across some urban environments, the latter(log-law) region may never exist at all.  相似文献   

隧道塌方的尖点灾变模型及应用   总被引：8，自引：0，他引：8  

刘贵应  刘新喜  魏新颜 《地质灾害与环境保护》2002,13(2):59-62

针对隧道塌方失稳问题，运用灾变理论建立隧道塌方失稳的尖点灾变模型。基于平衡曲面方程，可求得隧道围岩体内承载区介质刚度与对应的松驰区弱化介质本构曲线拐点处理刚度之比值K，并给出了塌方与否的判据，当K≤1时，隧道将发生塌方失稳；当K＞1时，隧道将不会发生塌方失稳。根据此模型，笔者解释了隧道中几种常见的灾变破坏机理，并提出了相应的治理方案。  相似文献