新疆萨尔朔克铜金多金属矿床成矿围岩锆石年龄、Hf同位素及其成矿背景     

沈雪华  姚春彦  樊献科  叶现韬  董永观 《地质通报》2016,35(1):167-174

新疆萨尔朔克金铜多金属矿床产于中泥盆统阿舍勒组上亚组的中酸性火山岩-次火山岩中,地表以金(铜)矿化为主,矿体形态及空间分布严格受NNW向断裂破碎带控制,矿体呈脉状、透镜状。金(铜)矿石以蚀变岩型为主,其次为石英脉型,赋矿围岩为黄铁绢英岩化流纹斑岩。金主要赋存在微细粒黄铁矿等硫化物和脉石英中,黄铜矿常呈不规则细脉状出现。在地表100m以下,出现铅锌矿化,且向深部铅锌品位较高,一般3%~5%,最高达12%以上。流纹斑岩与金铜多金属矿关系密切。通过锆石U-Pb同位素测年和Hf同位素测试分析,获得流纹斑岩的成岩年龄为386.2±1.5Ma,εHf(t)在7~13之间,主要集中在8.5~12.5之间。上述结果表明,流纹斑岩可能形成于早泥盆世晚期活动大陆边缘环境,是俯冲增生的产物。铅锌矿化是386Ma流纹斑岩期后岩浆作用的产物,而金铜矿化则是在含矿流纹斑岩的基础上,经其后火山热液叠加作用发生的。  相似文献   

Evaluation of Effective Depth of PVD Improvement in Soft Clay Deposit: A Field Case Study     

Jun Chen  Zhen-Yu Yin  Ye-Shuang Xu  Suksun Horpibulsuk 《Marine Georesources & Geotechnology》2016,34(5):420-430

This article presents a case history of determination of effective depth of prefabricated vertical drains (PVDs) under embankment loading on a very soft clay deposit in central China, near Jiujiang, Jiangxi Province. The height of the embankment was 5.3 m and construction time was about one year. The PVDs were installed to a depth of 8.5 m at a spacing of 1.5 m in a triangular pattern. Field observations and the finite element method (FEM) were employed to analyze the performance of the soft deposit during embankment construction. The influential depth of the embankment loading was evaluated based on settlement, excess pore pressure, and stress increase in subsoil, both from the observed data and FEM analysis. The effective PVD depth was determined in the following ways: (1) the depth of 5% subsoil settlement of surface settlement; (2) vertical stress increase in subsoil of 25% in-situ stress; and (3) consolidation time/PVD depth relation by FEM. Based on the analysis, the effective depth of PVDs was determined to be between 10 and 12.8 m for this field case.  相似文献   

江西牛形坝-柳木坑金银铅锌多金属矿床铋矿物类型及指示意义     

鲁麟  梁婷  陈郑辉  王登红  赵正  陈伟 《地质学报》2018,92(3):560-574

江西银坑矿田的牛形坝-柳木坑矿床是赣南于都-赣县矿集区典型的金银铅锌多金属矿床。根据野外调研、系统矿相学研究和电子探针成分分析,表明铋在牛形坝-柳木坑矿床中是一种重要的伴生矿化金属元素,呈独立矿物或呈微细矿物包体分布在早期硫化物内部或边缘。铋矿物种类丰富,主要包括块硫铋银矿、硫铋银矿、板硫铋铜铅矿、针硫铋铅矿、硫铜铋矿、库辉铋铜铅矿、辉碲铋矿等。与同一矿集区石英脉型盘古山钨铋矿床相比,两矿床铋矿物种类均出现Pb-Ag-Bi-S、Te-Bi-S元素组合,赋存形式和含量有所不同,Cu-Pb-Bi-S元素组合仅在牛形坝-柳木坑矿床出现。矿床属于Au-Bi-(低Te)-S体系,铋盐矿物形成于中低温、中高密度、低盐度的成矿环境。从岩浆中分馏出来的成矿流体发生减压沸腾迫使大量蒸汽相逸散,硫逸度增加,铋主要以硫络合物形式运移,随着黄铁矿等硫化物沉淀,硫被大量消耗形成金矿物和碲化物(碲银矿)。成矿流体演化过程中由于温度和硫逸度进一步降低导致在成矿后期沉淀出大量铋硫盐矿物。成矿过程中的Bi促进金的迁移富集。铋矿物在两矿床中的赋存特征、化学成分、形成环境以及沉淀机制等表现出差异,说明铋具有成矿选择性,起到对成矿物质示踪的作用。  相似文献   

鄂尔多斯盆地南部地区延长组深水沉积构造特征及地质意义     

王振  张元福  张娜  高勇  焦朝维  白一鸣  张博文  魏康强 《现代地质》2018,32(1):121

鄂尔多斯盆地南部地区上三叠统延长组长7段发育有典型的重力流沉积。对野外露头剖面进行大量调查研究,发现研究区重力流沉积发育丰富的沉积构造,底层面构造、软沉积变形构造是主要的两种类型。这种深水沉积构造组合能够很好地揭示研究区广泛发育的一定坡度背景下深水重力流沉积体系。滑移-滑塌沉积、砂质碎屑流沉积、浊流沉积是研究区发育最为广泛的深水重力流沉积类型,滑移-滑塌及软沉积变形构造为触发机制沉积响应,底层面构造为砂质碎屑流沉积及浊流沉积响应。综合分析研究区地层发育的大量凝灰岩夹层、深水泥岩中发育的植物碎屑、深水砂岩中发育的大量浅黄色泥砾等沉积特征,认为地震、火山喷发及季节性洪水为研究区深水重力流沉积最有利的触发因素。  相似文献   

张家口崇礼小西湾侵入岩成矿条件及矿化机制研究     

樊玉朋  李思伟  王子洋  刘丹 《物探与化探》2018,(1):111-117

张家口市崇礼区北部完成了1∶5万地球化学测量,小西湾侵入岩位置恰与化探工作圈定的AS33,即小西湾综合异常高度套合。利用区域资料及异常查证所获得的大比例尺地质、物化探数据,对该区成矿条件进行了综合分析,并推测了矿化蚀变的形成机制及其矿化蚀变体主要赋存位置。通过推断该区矿化机制并建立模型,认为该区具有寻找中高温热液型多金属矿床的潜力,并对下一步的勘查方向提出了建议。  相似文献   

Metallogenic Mechanism and Tectonic Setting of Tungsten Mineralization in the Yangbishan Deposit in Northeastern China     

HAO Yujie  REN Yunsheng  ZHAO Hualei  LAI Ke  ZHAO Xuan  MA Yupeng 《《地质学报》英文版》2018,92(1):241-267

The Yangbishan iron–tungsten deposit in the Shuangyashan area of Heilongjiang Province is located in the center of the Jiamusi Massif in northeastern China. The rare earth element and trace element compositions of the scheelite show that it formed in a reducing environment and inherited the rare earth element features of the ore-forming fluid. The geochemical characteristics of the gneissic granite associated with the tungsten mineralization show that the magma formed in this reducing environment and originated from the partial melting of metamorphosed shale that contained organic carbon and was enriched with tungsten. In addition, in situ Hf isotopic analysis of zircons from the gneissic granite indicates that they probably originated from the partial melting of a predominantly Paleo–Mesoproterozoic crustal source. According to LA-ICP-MS zircon dating, the Yangbishan orerelated gneissic granite has an Early Paleozoic crystallization age of 520.6 ± 2.8 Ma. This study, together with previous data, indicates that the massifs of northeastern China, including Erguna, Xing'an, Songliao, Jiamusi, and Khanka massifs, belonged to an orogenic belt that existed along the southern margin of the Siberian Craton during the late Pan-African period. The significant continental movements of this orogeny resulted in widespread magmatic activity in northeastern China from 530 Ma to 470 Ma under a tectonic setting that transitioned from compressional syn-collision to extensional postcollision.  相似文献   

The Late Triassic I–Type Granites from the Longmu Co–Shuanghu Suture Zone in the interior of Tibetan Plateau, China: Petrogenesis and Implication for Slab Break–Off     

ZHAO Zhen  WU Zhenhan  LU Lu  YU Junqiu  WU Yanjun 《《地质学报》英文版》2018,92(3):935-951

The Jiangaidarina granitic mass(JM) is an important part of the magmatic belt in Longmu CoShuanghu Suture Zone(LSSZ) in the central Tibetan Plateau. An integrated research involving wholerock geochemistry, zircon LA-ICP-MS U-Pb ages and Hf isotopic compositions was carried out to define the timing, genesis and tectonic setting of the JM. Zircon LA-ICP-MS U-Pb ages have been obtained ranging from 210 to 215 Ma, rather than the Early Jurassic as previously thought. Fifteen granite samples contain hornblendes and show a negative correlation between P_2 O_5 and SiO_2, indicating that the JM is an I-type granite. All the granites are enriched in LREE relative to HREE, with negative Eu anomalies(Eu/Eu*=0.56-0.81), and have similar trace elements patterns, with depletion of Ba, Nb, Sr and P. These suggest that the JM was fractionated, and this is also proved by the characteristic of negative correlations between oxide elements(TiO_2, MgO, FeOt, MnO, CaO) and SiO_2. Almost all ε_(Hf)(t) values of the granites are between-10.3 and-5.8, implying that the JM has a crustal source intimately related with the South Qiangtang Block(SQB), except for one(+10.2), showing a minor contribution from mantle source.Moreover, relatively low Na_2 O/K_2 O ratios(0.42-0.93) and high A/CNK values(0.91-1.50) reflect that the JM was predominately derived from the medium-high potassium basaltic crust, interacted with greywacke. Our new geochemical data and geochronological results imply that the Late Triassic magmas were generated in a post-collisional tectonic setting, probably caused by slab break-off of the Longmu Co-Shuanghu Tethyan Ocean(LSTO). This mechanism caused the asthenosphere upwelling, formed extension setting, offered an enormous amount of heat, and provided favorable conditions for emplacement of voluminous felsic magmas. Furthermore, the LSTO could be completely closed during the Middle Triassic, succeed by continental collision and later the slab broke off in the Late Triassic.  相似文献   

Metallogeny of the Baiyangping Lead‐Zinc Polymetallic Ore Concentration Area,Northern Lanping Basin of Yunnan Province,China     

WANG Xiaohu  SONG Yucai  ZHANG Hongrui  LIU Yingchao  PAN Xiaofei  GUO Tao 《《地质学报》英文版》2018,92(4):1486-1507

The Lanping Basin in the Nujiang‐Lancangjiang‐Jinshajiang (the Sanjiang) area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment‐hosted Pb‐Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India‐Asia continental collisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the ore‐forming elements in the east ore belt are mainly Pb‐Zn‐Sr‐Ag, while Pb‐Zn‐Ag‐Cu‐Co elements are dominant in the west ore belt. Comparative analysis of the C‐O‐Sr‐S‐Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore‐forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb‐Zn mineralization age of both ore belts was contemporary and formed in the same metallogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.  相似文献   

Ore-forming Fluid and Mineral Source of the Hongshi Copper Deposit in the Kalatage Area, East Tianshan, Xinjiang, NW China   总被引：1，自引：0，他引：1  

YU Mingjie  WANG Jingbin  MAO Qigui  FANG Tonghui  ZHANG Rui 《《地质学报》英文版》2018,92(5):1769-1783

The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ18OH2O values and δD values of the fluid range from ?6.94‰ to ?5.33‰ and from ?95.31‰ to ?48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from ?0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.  相似文献   

内蒙古新地沟金矿床黄铁矿热电性特征及深部找矿意义          下载免费PDF全文

刘华南  刘家军  李小伟  刘冲昊  代鸿章  陶银龙  王建锋  杜映东  范云飞 《中国地质》2018,45(4):819-838

内蒙古新地沟金矿是中型绿岩型金矿床,但已属于严重资源危机的矿山,急待寻找接替资源,因此对新地沟金矿床进行深部远景预测具有十分重要的意义。本文根据找矿矿物学和成因矿物学理论,利用显微镜、电子探针及热电仪系统分析新地沟金矿床不同标高和矿段中黄铁矿的热电型标型特征,研究结果表明:新地沟金矿床中黄铁矿的晶型以立方体、五角十二面体及聚形为主;热电系数变化主要集中在-331.10~340.20μV·°C~(-1)范围内,导电型多以N型为主,约占总含量的80%;成矿温度主要集中于250~340℃,属于中温矿床。黄铁矿热电性参数XNP变化范围较大,估算矿体剥蚀率为67.96%~74.31%。通过对黄铁矿导型的空间分布规律和矿体剥蚀分析表明:油篓沟矿段位于矿体中底部,向深部可能有小规模延伸,小西沟矿段钻孔ZK106在深部有较大规模的延伸,其矿化前景最好;小西沟矿段钻孔ZK102深部矿化前景次之;大汗青矿段钻孔ZK_2802其深部矿化前景较差。综合分析认为,该矿床深部具有较好的找矿潜力。  相似文献