Boundary frame contribution in coupled and uncoupled steel plate shear walls          下载免费PDF全文

Meng Wang  Daniel J. Borello  Larry A. Fahnestock 《地震工程与结构动力学》2017,46(14):2355-2380

The steel plate shear wall (SPSW) system is a robust option for earthquake resistance due to the strength, stiffness, ductility and energy dissipation that it provides. Although thin infill plates are efficient for resisting lateral loads, boundary frames that are proportioned based on capacity design requirements add significant structural weight that appears to be one of the factors limiting the use of the system in practice. An alternate configuration, the SPSW with coupling (SPSW‐WC), was explored recently as an option for increasing architectural flexibility while also improving overall system economy and seismic performance. The SPSW‐WC, which extensively employs flexural boundary frame contribution, has shown promise in analytical, numerical and experimental studies, but recent research on uncoupled SPSWs suggests that boundary frame contribution should not be considered for carrying seismic design shear. As a result, in the present study, boundary frame contribution in SPSWs was explored with detailed three‐dimensional finite element models, which were validated against large‐scale SPSW‐WC tests. Six‐story systems were considered, and the study matrix included single and double uncoupled SPSWs along with coupled SPSWs that had various degrees of coupling. Variations in design methodology were also explored. The modeling framework was employed to conduct static monotonic and cyclic pushover analyses and dynamic response history analysis. These analyses demonstrate the beneficial effect of coupling in SPSWs and illustrate the need to consider boundary frame contribution in design of coupled SPSWs. In addition, sharing design shear between the infill plate and the boundary frame is more generally shown to not be detrimental if this sharing is done in the design stage based on elastic analysis and the resulting boundary frame provides adequate secondary strength and stiffness following infill plate yielding. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Wood and sediment storage and dynamics in river corridors          下载免费PDF全文

Ellen Wohl  Daniel N. Scott 《地球表面变化过程与地形》2017,42(1):5-23

Large wood along rivers influences entrainment, transport, and storage of mineral sediment and particulate organic matter. We review how wood alters sediment dynamics and explore patterns among volumes of in‐stream wood, sediment storage, and residual pools for dispersed pieces of wood, logjams, and beaver dams. We hypothesized that: volume of sediment per unit area of channel stored in association with wood is inversely proportional to drainage area; the form of sediment storage changes downstream; sediment storage correlates with wood load; the residual volume of pools created in association with wood correlates inversely with drainage area; and volume of sediment stored behind beaver dams correlates with pond area. Lack of data from larger drainage areas limits tests of these hypotheses, but the analyses suggest that sediment volume correlates positively with drainage area and wood volume. The form of sediment storage in relation to wood appears to change downstream, with wedges of sediment upstream from jammed steps most prevalent in small, steep channels and more dispersed sediment storage in lower gradient channels. Pool volume correlates positively with wood volume and negatively with channel gradient. Sediment volume correlates well with beaver pond area. More abundant in‐stream wood and beaver populations present historically equated to greater sediment storage within river corridors and greater residual pool volume. One implication of these changes is that protecting and re‐introducing wood and beavers can be used to restore rivers. This review of the existing literature on wood and sediment dynamics highlights the lack of studies on larger rivers. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Evaluating a process‐based model for use in streambank stabilization: insights on the Bank Stability and Toe Erosion Model (BSTEM)          下载免费PDF全文

Kate Klavon  Garey Fox  Lucie Guertault  Eddy Langendoen  Holly Enlow  Ron Miller  Anish Khanal 《地球表面变化过程与地形》2017,42(1):191-213

Streambank retreat is a complex cyclical process involving subaerial processes, fluvial erosion, seepage erosion, and geotechnical failures and is driven by several soil properties that themselves are temporally and spatially variable. Therefore, it can be extremely challenging to predict and model the erosion and consequent retreat of streambanks. However, modeling streambank retreat has many important applications, including the design and assessment of mitigation strategies for stream revitalization and stabilization. In order to highlight the current complexities of modeling streambank retreat and to suggest future research areas, this paper reviewed one of the most comprehensive streambank retreat models available, the Bank Stability and Toe Erosion Model (BSTEM), which has recently been integrated with several popular hydrodynamic and sediment transport models including the Hydrologic Engineering Center's River Analysis System (HEC‐RAS). The objectives of this paper were to: (i) comprehensively review studies that have utilized BSTEM and report their findings, (ii) address the limitations of the model so that it can be applied appropriately in its current form, and (iii) suggest directions of research that will help make the model a more useful tool in future applications. The paper includes an extensive overview of peer reviewed studies to guide future users of BSTEM. The review demonstrated that the model needs further testing and evaluation outside of the central United States. Also, further development is needed in terms of accounting for spatial and temporal variability in geotechnical and fluvial erodibility parameters, incorporating subaerial processes, and accounting for the influence of riparian vegetation on streambank pore‐water pressure dynamics, applied shear stress, and erodibility parameters. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

大直径钢管桩土塞效应的拟静力判断方法          下载免费PDF全文

刘润  郭绍曾  周龙  闫澍旺 《地震工程学报》2017,39(1):20-27

钢管桩在贯入过程中土塞效应的正确判断对打桩阻力及承载力的预测有重要影响,常用的静力平衡土塞效应判断方法主要适用于小直径钢管桩。随着海洋平台工作水深的不断增加及海上风电工程的建设,直径大于2m的大直径钢管桩被广泛采用,管桩直径的增加改变了桩管内土体的受力与变形特征。通过数值模拟方法获得砂土中不同径长比的钢管桩在打桩过程中桩周土体的破坏模式,确定采用梅耶霍夫公式计算打桩过程中桩端土体阻力,同时分析锤击惯性力对桩管内土塞的影响,提出采用拟静力平衡法判断大直径钢管桩的土塞闭塞效应。开展不同径长比管桩的室内小比尺打桩模型试验,并对实际工程中的土塞闭塞效应进行判断,验证拟静力平衡法对判断大直径钢管桩土塞效应的适用性。  相似文献   

青海钻孔应变映震效能研究   总被引：2，自引：1，他引：1       下载免费PDF全文

李玉丽  李启雷  孙春玲  杨晓霞  安黎霞 《地震工程学报》2017,39(1):126-132

利用青海省6套YRY-4分量钻孔应变仪2007—2015年的观测资料,将该地区符合扫描范围的地震从震前异常和同震特征两方面进行研究。结果显示:湟源、德令哈分量钻孔应变差应变曲线地震前大多有短期超差异常;分量钻孔应变仪的同震响应幅度与震级、震中距都有关。同一地震,多台仪器多数情况同震响应幅度与震中距成反比,少数成正比;一般单台仪器同震响应幅度与地震震级成正比关系,震级越大同震响应幅度越大;分量钻孔应变仪的同震响应延迟时间大多与地震震中距成正比,震中距越远同震响应延迟时间越长;分量钻孔应变仪同震响应持续时间与震级基本成正比,震级越大同震持续时间越长。  相似文献   

地震作用下双薄壁高墩刚构桥桥台处的碰撞效应及减碰措施          下载免费PDF全文

徐略勤  魏晓龙 《地震工程学报》2017,39(3):425-433

针对双薄臂高墩连续刚构桥两侧桥台处主梁与背墙的碰撞现象,基于桥台-背土作用简化模型和Kelvin碰撞模型,采用非线性时程法研究碰撞对双薄臂墩地震剪力、弯矩、曲率和位移,以及支座纵向变形的影响。提出可牺牲背墙、阻尼器、加强型横系梁等三种减碰措施,并对比分析其减碰效果。研究表明:碰撞会显著增大高墩的地震内力和曲率响应,降低墩顶位移和支座的纵向变形;碰撞刚度的变化对碰撞效应的影响在20%以内;可牺牲背墙和阻尼器两种减碰措施均可大幅降低桥墩的地震内力和曲率,使其接近不考虑碰撞时的状态,阻尼器同时还可以保护支座不超过容许变形,而可牺牲背墙则会导致支座的地震破坏;加强型横系梁不能发挥减碰作用,反而会增大桥墩的地震响应。  相似文献   

立柱直径比对四立柱平台涡激运动性能影响的数值研究     

陈元鑫  寇雨丰  林志良  刘明月 《海洋工程》2021,39(1):43-52

与单立柱平台(Spar)类似,四立柱平台在洋流作用下也容易发生涡激运动,对锚泊和立管系统的疲劳寿命产生不利影响。一种非对称半潜式平台具有两种不同尺寸的立柱,立柱直径比对非对称平台涡激运动性能的影响尚需深入研究。采用计算流体力学(CFD)方法,对直径比分别为1.0、1.5和2.0的立柱组合在两种不同角度水流作用下的运动响应进行了二维数值模拟,分析发现:立柱直径比不为1时四立柱平台也具有明显的涡激运动,其横荡运动具有显著的锁定现象;在广义折合速度定义下,与相同直径的四立柱平台相比,立柱直径比不为1时其横荡运动锁定区间变宽且滞后,横荡响应幅值的峰值具有明显差异;在所研究的直径比范围内,大直径立柱在上游时涡激运动响应比其在下游时更显著,且这种差异随着直径比变大而变大。  相似文献   

前板可旋转的双垂板结构水动力特性的理论研究     

欧泽挺  邓争志  任翔  赵西增 《海洋工程》2021,39(2):98-109

振荡水柱波能转换装置的最大转换效率往往受到腔内水柱共振机制的直接影响。通过对装置的基本结构进行简化,提出了一种前墙可绕固定轴旋转的双垂板式结构系统,旨在通过前墙的旋转运动进一步加剧水柱的振荡,从而对腔内水柱的共振机制进行调节和控制。基于线性波理论,采用匹配特征函数展开法对波浪与双垂板结构的相互作用进行理论研究,针对流场在结构物尖角附近的奇异性特征,将公共界面上的速度分布基于切比雪夫多项式近似展开,并应用区域间的速度与压力连续条件进行求解。通过分析结构的几何参数对反射透射系数、平均波面高程、前墙旋转振幅以及前墙与水面间相位差的影响,深究其共振机理,为振荡水柱波能转换装置的效率优化机制提供理论依据。结果表明,在所研究的波浪频率范围内,前墙的自由旋转运动会加剧板间的平均波面高程,应用于波浪能转换装置中能进一步拓宽高效频率带宽。  相似文献   

THE APPLICATION OF MINIATURE UNMANNED AERIAL VEHICLE IN 25 NOVEMBER 2016 ARKETAO M_W6.6 EARTHQUAKE          下载免费PDF全文

FU Bo  LI Zhi-qiang  CHEN Jie  FAN Xi-wei  LI Xiao-li  LI Tao  YAO Yuan  LIU Yao-hui 《地震地质》2018,40(3):672-684

In order to complete the field investigation to the 25 November 2016 Arketao M_W6.6 earthquake, ultra-low altitude remote-sensing data were obtained from miniature unmanned aerial vehicle. The surface rupture surveying has important significance for earthquake research. This paper selects the macro-epicenter of Arketao as the study area. The pictures were obtained with DJI Phantom 3 professional input into the software, the Digital Elevation Model (DEM), Digital Orthophoto Map (DOM) were acquired based on photogrammetry method using the overlapped optical remote-sensing images of UAV. Using these data, we can identify surface ruptures that have vertical dislocation. We selected six feature points and drew the elevation profile. In the elevation profile map, we chose smooth part of the surface rupture sides and obtained the trend line. A stable point in the surface rupture was selected and the abscissa of the point was taken into the equation of two straight lines. Then subtracting the results of the two equations, we can get the vertical dislocation of the surface rupture. On this basis, we chose six feature points and determined their vertical dislocation, which are between 4.4cm and 10.4cm. What's more, taking Bulungkou Xiang in Xinjiang Uygur Autonomous Region for example, we speculated some surface ruptures that have vertical dislocation. It can provide a new method for identifying surface rupture in the field. In addition, we get DEM data of the Bulunkou area where ambient conditions are very poor, by using miniature unmanned aerial vehicle and taking 255 photos. Putting those photos into the EasyUAV software, we got the area digital elevation of 2cm resolution. Comparing these data with RTK data, we summarized some practical problems and solutions in the practical operation and evaluated the accuracy of miniature unmanned aerial vehicle data. The Pearson Correlation Coefficient is 0.996 6. In terms of absolute elevation, the average result of UAV and RTK differs by 156.96m. In terms of relative elevation, the average result of UAV and RTK differs by 9.74m. Compared with the previous test of Pishan County, there is a notable divergence in the results. It shows that the data accuracy will be affected to some extent in the cold weather in high elevations. The specific impact needs further exploration.  相似文献   

THREE-DIMENSIONAL DEFORMATION CHARACTERISTICS OF THE XIANSHUIHE FAULT ZONE          下载免费PDF全文

ZHAO Jing  REN Jin-wei  JIANG Zai-sen  Yue Chong 《地震地质》2018,40(4):818-831

In order to analyze 3-dimensional movement and deformation characteristics and seismic risk of the Xianshuihe fault zone, we inverted for dynamic fault locking and slip deficit rate of the fault using the GPS horizontal velocity field of 1999-2007 and 2013-2017 in Sichuan-Yunnan region, and calculated annual vertical change rate to analyze the vertical deformation characteristics of the fault using the cross-fault leveling data during 1980-2017 locating on the Xianshuihe fault. The GPS inversion results indicate that in 1999-2007, the southeastern segment of the fault is tightly locked, the middle segment is less locked, and the northwestern segment is basically in creeping state. In 2013-2017, the southeastern segment of the fault is obviously weekly locked, in which only a patch between Daofu-Bamei is locked, and the northwestern segment is still mostly in creeping state, in which only a patch at southeastern Luhuo is slightly locked from surface to 10km depth. The cross-fault leveling data show that annual vertical change rate of the Zhuwo, Gelou, Xuxu and Goupu sites on the northwestern segment is larger, which means vertical movement is relatively active, and annual vertical change rate of the Longdengba, Laoqianning, and Zheduotang sites on the southeastern segment is small, which means the fault is locked, and the vertical movement changes little before and after the Wenchuan earthquake. Combining with the 3-dimensional movement and deformation, seismic activity and Coulomb stress on the Xianshuihe Fault, we consider the seismic risk of the southeastern segment is larger, and the Wenchuan earthquake reduced the far-field sinistral movement and the fault slip deficit rate, which may reduce the stress and strain accumulation rate and relieve the seismic risk of the southeastern segment.  相似文献