航空矢量重力测量中光纤陀螺随机漂移误差实时补偿方法     

王峥  李建成 《测绘学报》2017,46(2):144-150

光纤陀螺随机漂移误差是影响航空矢量重力测量系统姿态解算精度的关键因素。建立模型并在输出中对其补偿是抑制该项误差的有效方法。针对传统ARMA模型只能对平稳随机漂移误差建模,且模型无法满足实时滤波需求的问题,本文引入适用于非平稳随机漂移误差的ARIMA模型,同时给出详细的建模过程,并提出采用实时平均算法消除原始采样序列中常值分量的思路,实现了随机漂移误差的实时Kalman滤波估计。基于本文所提出的模型和实时滤波算法,对光纤陀螺实测数据进行分析,结果表明处理后信号中随机漂移误差的方差减小了46.5%。Allan方差分析结果表明,滤波后角度随机游走系数和角速率随机游走系数分别降低了约50%和40%。本文的结果说明ARIMA模型能够准确描述陀螺的非平稳随机漂移误差。基于实时平均算法的Kalman滤波可实现随机漂移误差的在线估计,有望提高航空矢量重力测量系统的姿态解算精度。  相似文献   

碳纤维布用于砖砌体抗震加固的试验研究   总被引：49，自引：1，他引：49  

赵彤  张晨军  谢剑  李浩菊 《地震工程与工程振动》2001,21(2):89-95

通过4片碳纤维布加固砖砌体在周期反复荷载作用下受力性能的试验，研究了粘贴碳纤维布来增强砖砌体抗震能力这种加固方法的有效性。本文研究了碳纤维布加固砖砌体的受力特性，分析了碳纤维布的用量以及贴布方式等因素对砖砌体抗震加固效果的影响。在此基础上，本文提出了碳纤维布加固砖砌体抗剪承载力的简化计算方法，可以满足实际工程设计的要求。  相似文献   

基于水平传感器-光纤陀螺-全站仪组合的地籍测量新方法     

暴旭凯  吴峻  闫晶 《测绘与空间地理信息》2016,(10):62-66

针对全站仪测量技术存在作业周期长、劳动强度大和受观测环境影响严重等不足,本文将光纤陀螺寻北技术、倾角测量技术应用于地籍测量中,降低了地籍测量对控制点及水平度的依赖,有效地提高了测量效率,推导了全站仪在倾斜状态下界址点测量和定向的计算公式。结合全站仪可水平旋转180°的特点,给出了光纤陀螺安装误差自补偿的操作步骤;对影响定向精度的主要误差源进行仿真分析,结果表明:光纤陀螺精度与水平传感器精度对定向精度影响较大,在光纤陀螺精度为0.05°/h情况下,当倾角测量误差为1'时,定向误差为26.51″。  相似文献   

Application of Tube-Packaged FBG Strain Sensor in Vibration Experiment of Submarine Pipeline Model   总被引：1，自引：1，他引：1  

任亮  李宏男周晶孙丽  李东升 《中国海洋工程》2006,20(1):155-164

1 .IntroductionSubmarine pipelines have been worldwide utilizedinthe field of offshore oil/gas exploitation.Inmany cases ,the pipelinesinitiallyresting onthe seabed may become suspended due toseveral reasonssuch as installation on an uneven seabed or scou…  相似文献   

Variations of backscatter strength along the super slow-spreading Southwest Indian Ridge between 57°E and 70°E     

Daniel Sauter  Vronique Mendel 《Marine Geology》1997,140(3-4):237-248

Simrad EM12 backscatter strength data of the Southwest Indian Ridge (SWIR), between 57°E and 70°E, are used to reveal the along-axis segmentation of this super slow-spreading ridge. The backscatter properties of different geologic domains, like bathymetric highs and oblique basins within the rift valley, are characterized using 66 small test sites. We show that backscatter strength is higher on bathymetric swells, corresponding to segment centres, and lower in deep oblique basins corresponding to axial non-transform discontinuities and fracture zones. This contrast between segment centres and discontinuities is produced by both a thicker sediment cover and less frequent volcanic eruptions at segment ends. Using the model of Mitchell (1993), sediments have been estimated to be 2 to 5 m thicker in these areas than at segment centres. The distribution of the seamounts within the rift valley is controlling the long-wavelength variations of the mean backscatter strength calculated along the axis. Lower densities of seamounts and thicker sediments are producing lower and heterogeneous reflectivity levels in the deepest part of the axial valley floor between 61°45′E and 63°45′E. We propose that cooler mantle temperatures inducing construction of fewer volcanoes occur beneath this part of the ridge. The mean backscatter strength along the SWIR axis decreases dramatically toward the Rodrigues Triple Junction suggesting that volcanic production is reduced between 68°20′E and 69°20′E and that the transition from amagmatic tectonic deformation at the triple junction to new seafloor spreading occurs between 69°20′E and 70°E.  相似文献   

Sediment trapping and bypassing characteristics of a stable tidal inlet at Kaohsiung Harbor, Taiwan   总被引：2，自引：0，他引：2  

James T. Liu  Li-hua Hou 《Marine Geology》1997,140(3-4):367-390

Around the artificially stabilized tidal inlet that connects Kaohsiung Harbor to Taiwan Straight, 203 surficial samples of the sea floor were taken from the nearshore, in the outer harbor, and portions of the inner harbor. The bathymetry of the same area was also surveyed. The sand fraction in each sample was analyzed for the grain-size composition with a custom-built rapid sediment analyzer. A total of twenty-one size-classes were used in the analysis. Three hypothetical sediment sources were assumed to have influenced the spatial grain-size patterns in the study area: the northward and southward littoral drifts, and the sediments exported from the harbor. After reducing the influence of each hypothetical sediment source separately, the data were analyzed using empirical orthogonal (eigen) function (EOF) analysis. The results indicate that the northward long-term littoral drift is the dominant direction of sediment transport in the nearshore of the study area. A conceptual model for four different sediment trapping and bypassing patterns are proposed. (1) Excess bypass (or net outflux): this bypass pattern is characterized by the export of fine-grained sediments (mud and size classes in the very fine sand fraction) from the interior of the harbor. (2) Partial bypass (or partial trapping): this bypass pattern is represented by the size-classes in fine sand fraction. The amount of these grain sizes entering the outer harbor through the inlet is more than the amount exiting at the inlet mouth, resulting in the retention of a portion of these grain sizes. (3) Total bypass (or zero trapping): grain sizes that exhibit this bypass pattern do not come near the mouth of the inlet. These grain sizes include medium and coarse sand fractions. (4) Lag deposits: this group includes the size classes in the very coarse sand fraction, which are largely concentrated in the scour pit immediately seaward of the inlet mouth. In general, surficial sediment grain-size patterns represent a time-averaged response of the substrate to the transport processes over the time scale of at least two seasons. The differential associations of grain-size groups with various topographic features in the study area suggest morpho-textural relationships exist between the sea floor topography and grain size distribution patterns.  相似文献   

土体含水率监测的移动点热源法研究     

张婵青  何凤飞  姜顺航  曾子真  熊峰  陈江 《岩土力学》2022,43(7):2025-2034

土体含水率监测的线热源法对加热功率要求较高,当热源强度不稳定时,监测结果容易受到影响。为了解决线热源法的不足,提出了土体含水率监测的移动点热源（point heat source,PHS）法。该方法利用土体热物性与含水率之间的相关性,通过监测土体中PHS的降温规律间接识别含水率。通过数值模拟研究了点热源在含水率均匀分布的土体中的传热规律,根据热源降温曲线的特征,定义了含水率判别指标η,进而建立了含水率与判别指标的拟合关系,并对监测灵敏度的影响因素进行了参数分析。在含水率非均匀分布的土体中开展了点热源降温规律的数值模拟,根据测点降温时程曲线计算含水率判别指标,并利用含水率与判别指标的拟合公式反演含水率分布。结果表明,点热源法反演得到的含水率分布与实际值吻合较好,验证了该方法的理论可行性。通过模型试验进一步验证了该方法的可行性。  相似文献   

冻融作用下三类纤维加筋固化土的抗压抗拉性能     

魏丽  柴寿喜  张琳  李瑶 《岩土力学》2022,43(12):3241-3248

合成纤维、矿物纤维和植物纤维加筋土,增强了土的强度和抗变形性能。开展冻融作用下的无侧限抗压试验和劈裂抗拉试验,研究聚丙烯纤维、玄武岩纤维和棕榈纤维加筋石灰固化土的抗压和抗拉性能随冻融次数的变化规律。结果表明：未冻融和冻融环境下,聚丙烯纤维加筋固化土、玄武岩纤维加筋固化土和棕榈纤维加筋固化土的最优质量加筋率分别为0.2%、0.2%和0.4%。随冻融次数增加,三类纤维加筋固化土的抗压强度和抗拉强度均呈阶段性下降,纤维加筋固化土的破坏应变均大于石灰固化土。冻融作用下,聚丙烯纤维加筋固化土的抗压强度、抗拉强度和抗变形性能均优于另两类加筋固化土。纤维与土颗粒间的界面作用力和纤维对土的空间约束作用,增强了土的冻融耐久性。对比三类纤维加筋固化土的试验结果,聚丙烯纤维加筋固化土的抗冻融性能最优。  相似文献   

四川省峨边县玄武岩特征及开发利用前景     

张航飞  韩晓影  钟强生  竹合林  梁成  郭文彦 《中国地质调查》2022,9(5):61-68

四川省峨边县玄武岩矿资源丰富,但尚无开发利用纤维用玄武岩的矿山。从玄武岩的矿石组构、化学成分和玄武岩拉丝性能判别指标3个方面开展纤维用玄武岩评价工作。研究结果显示: 研究区致密块状玄武岩和杏仁状玄武岩多属拉斑系列与碱性系列的过渡型岩石,玻基玄武岩均为碱性系列; 拉斑玄武岩系列矿石的化学成分具有SiO₂含量较高、(K₂O+Na₂O)和TiO₂含量较低、FeO/MgO值较大的特征; 区内致密块状玄武岩适合连续玄武岩纤维生产,而杏仁状玄武岩的杏仁中含有石英和方解石等次矿物,玻基玄武岩具有火山玻璃成分含量高、杏仁状构造及酸度系数过高等特征,均不宜作为生产玄武岩纤维的原料。研究区玄武岩矿具备纤维用玄武岩资源储备地的潜力,建议采用综合开发的方式利用玄武岩矿资源。  相似文献   

玄武岩纤维原料特征的统计及分析研究     

李珎  徐冠立  刘荣  史凯文 《地质论评》2023,69(4):2023040019-2023040019

玄武岩纤维是以玄武岩或他种成分相近的岩石为主要原料,经熔融后拉制而成的一种高性能纤维。天然矿石的成分波动会造成拉丝困难或纤维性能不稳定,本文收集了54组原料岩石以及114组玄武岩纤维样品的化学成分数据,研究归纳了玄武岩纤维所需原料的岩石学特征、参数指标特征和其他特征,分析提出了可拉丝岩石相关参数指标的最佳区间。适于生产玄武岩纤维的原料矿石,其特征可总结如下：岩石学方面,以基性岩以及SiO2含量为53%~57%的中性岩为佳,岩石类型最佳为玄武岩或安山玄武岩;岩石结构最佳为间隐结构、玻基斑状结构或玻璃质结构;构造的影响是间接的,主要为气孔或杏仁构造中可能含有的一些不利矿物的影响;矿物组成方面,蛇纹石、沸石等含水矿物会在熔融过程中产生气泡,影响纤维制备连续性的同时也有利于原料的充分熔融,镁橄榄石、磁铁矿等高熔点矿物会使原料在熔融阶段难以完全熔化,导致熔体不均匀并容易析晶。参数指标方面,可拉丝岩石的酸度系数（Mk）最佳区间为4.0~5.5;黏度系数（Mv）为2.0~3.0;硅铝氧化物与其他氧化物比值为1.5~3.0;氧化物组成的物质的量分数分布为n(RO)=20%~30%,n(RO2)=57%~70%,n(R2O3)=10%~16%（R为阳离子）。  相似文献