PDC钻头在寺河煤矿瓦斯预抽放钻井中的应用   总被引：2，自引：1，他引：2  

吴小建  李新民 《中国煤田地质》2006,18(1):64-65,68

在寺河矿区一期瓦斯地面预抽放钻井施工中，使用传统的镶齿三牙轮钻头钻进，钻进速度低，仅为2.0m／h，且井斜不易控制、钻头寿命短、成本较高。通过对寺河煤矿地层特征的分析，在二期工程施工中，9#煤以上地层优选六翼内凹式PDC钻头钻进，采取一定技术措施并合理调整钻压、转速及泵量等钻进参数，钻速可达7．0m/h，井斜也得到有效控制，降低了钻井成本。  相似文献   

关于角平分线法建立线状缓冲区算法的改进   总被引：2，自引：0，他引：2  

李志刚  胡圣武 《测绘信息与工程》2005,30(5):35-36

分析了用对角平分线法建立缓冲区的算法,提出了一种新的求角平分线和缓冲点的方法,实践证明其在算法实现方面是可行的,而且效果比较理想。  相似文献   

GIS中直线元内插点精度及对误差带的影响   总被引：1，自引：0，他引：1  

魏峰远  邰茜 《测绘学院学报》2005,22(3):232-234

基于误差传播定律，考虑参数r误差影响，推导了线元内插点的精度计算公式，讨论内插点精度对线元误差带的影响，并对影响的结果进行了分析，得到了一些有益的结论。  相似文献   

非等截面桩超声波成孔质量检测     

韩亮 《物探与化探》2005,29(2):185-188

分析了非等截面超声波成孔质量检测的几个主要影响因素,给出了相应得改进措施。用工程实例说明超声波反射技术是一种保证非等截面桩成孔质量和成桩质量必不可少的检测方法。  相似文献   

襄樊汉江四桥大口径灌注桩成孔施工实践     

李宏伟  侯杰董军 《中国煤田地质》2005,17(2):35-36,42

介绍了使用泥浆护壁气举反循环回转钻进工艺进行襄樊汉江四桥大口径嵌岩桩的施工实践。施工中采用下置双护简隔离卵石层，合理选用钻头类型(卵砾石层采用五翼合金刮刀钻头，基岩采用球齿滚刀钻头)和钻进参数(混合器沉没深度，尾管长度，孔内空气流量与压力)，摸索与总结出一套复杂地层成孔施工经验。  相似文献   

煤田勘查超千米深孔快速钻进技术探讨     

耿建国彭桂湘  丁仲翔 《中国煤田地质》2005,17(6):50-51,57

针对目前国内煤田勘查主要机具及工艺技术方法存在的主要问题,结合煤田勘查地层地质条件和超千米深孔施工要求,研制了液压立轴式HTJ-2000型钻机和新型绳索取心钻具,并就配套设备选型、钻进工艺、钻进参数、泥浆指标及应用效果进行了阐述.该项技术的应用,已明显提高了钻效,使钻孔深度达到1 350m.  相似文献   

新疆鄯善康古尔塔格蛇绿岩及其大地构造意义   总被引：4，自引：1，他引：4  

李文铅  夏斌吴国干  王核王冉 《岩石学报》2005,21(6):1617-1632

康古尔塔格蛇绿岩的岩石组合为变质橄榄岩-堆晶橄榄岩-辉长岩-斜长花岗岩-辉绿岩-玄武岩。方辉橄榄岩（蛇纹岩）、蛇纹石化辉石岩、蚀变辉长岩与特罗多斯蛇绿岩中同类型岩石类似，岩石总体低钾。变质橄榄岩MgO／（MgO＋TFeO）为0．834～0．866，TiO，（wt％）为0．02％，为SSZ型蛇绿岩的变质橄榄岩。玄武岩的构造环境判别显示其形成于边缘海盆。放射虫硅质岩的Al2O3／（Al2O3＋Fe2O3）值平均为0．047，MnO／TiO2比值平均为0．93，Ce具负异常，Ce／Ce^＊=0．548，Lan／Cen=1．661．表明放射虫硅质岩的形成环境与洋中脊有密切关系。该蛇绿岩位于塔里木板块和哈萨克斯坦-准噶尔板块的艾比湖-康古尔塔格缝合线上，为一套无序产出的古生代北天山洋在该区的古洋壳残片。  相似文献   

Effects of laser beam alignment tolerance on lidar accuracy   总被引：2，自引：0，他引：2  

Damir Latypov   《ISPRS Journal of Photogrammetry and Remote Sensing》2005,59(6):361-368

One of the major lidar error sources not yet analyzed in the literature is the tolerance of the laser beam alignment with respect to the scanning mirror. In this paper, the problem of quantifying these errors is solved for rotating polygon mirror type lidar systems. An arbitrary deviation of the beam from its design direction–the vector of beam misalignment–can be described by two independent parameters. We choose these as horizontal and vertical components of the misalignment vector in the body frame. Either component affects both, horizontal and vertical lidar accuracy. Horizontal lidar errors appear as scan line distortions—along and across track shifts, rotations and scaling. It is shown that the horizontal component of misalignment results in a scan line first being shifted across the track and then rotated around the vertical at the new center of the scan line. Resulting vertical lidar error, being a linear function of the scan angle, is similar to that produced by a roll bias. The vertical component of the beam misalignment causes scan line scaling and an along track shift. The corresponding vertical error is quadratic with respect to the scan angle. The magnitude of these effects is significant even at tight alignment tolerances and cannot be realistically accounted for in the conventional calibration model, which includes only range, attitude and GPS biases. Therefore, in order to attain better accuracy, this model must be expanded to include the beam misalignment parameters as well. Addition of new parameters into the model raises a question of whether they can be reliably solved for. To give a positive answer to this question, a calibration method must utilize not only ground control information, which is typically very limited, but also the relative accuracy information from the overlapping flight lines.  相似文献   

DGSC—203型液动射流冲击器在地热井的试验   总被引：4，自引：0，他引：4  

菅志军  桑路等 《地质与勘探》2002,38(5):92-93

介绍了新研制的DGSC－203石油钻井液动射液冲击器的性能参数及结构设计上的创新点，测试所获得的排量与压降之间的关系曲线可指导冲击器的使用。生产性试验证明该冲击器工作稳定，可大幅度提高硬地层钻井效率，克服钻柱振动，延长钻柱的使用寿命，具有良好应用前景。  相似文献   

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site     

Hartmut Kern  Zhenmin Jin  Shan Gao  Till Popp  Zhiqin Xu 《Tectonophysics》2002,354(3-4)

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.  相似文献