排序方式： 共有69条查询结果，搜索用时 859 毫秒
11.
iCAP 6300电感耦合等离子体发射光谱仪的常规维护方法 总被引：1，自引：1，他引：0
电感耦合等离子体发射光谱仪在使用过程中,由于控制气体流量的电磁阀出现机械性移位,致使工作气流量过于偏大或偏小,对进样系统及分析数据产生不利影响;长期频繁使用条件下,由于控制光学系统的机械定位装置的磨损,致使谱峰坐标偏离而影响仪器灵敏度;很长时间不能"引燃"等离子体,检查进样系统和氩气纯度并没有发现异常,需要验证RF发生器有无功率输出时有一定的困难;在等离子体工作时产生的高温尾气的长期作用下,难免造成点火头末端铜丝的锈蚀,致使点火头放电微弱,不能"引燃"等离子体。因此,为保证仪器的正常运行,提高工作效率,确保检测数据的准确度,实验室应建立健全电感耦合等离子体发射光谱仪维护保养方案,解决上述问题。本文结合实际工作经验,以iCAP 6300电感耦合等离子体发射光谱仪为例,提出可以借助"Manufacturing and Service.exe"程序校正工作气流量,验证RF发生器是否输出功率;利用C 193.091 nm谱线为基准校正谱线修正CID检测器的谱峰坐标系统;另外,对点火头、分析软件数据库及主机灰尘的清理也进行了详细的维护说明,这些措施有益于保障仪器的性能及提高设备的利用率。 相似文献
12.
阜石路分洪暗涵某暗挖段,浅涵暗挖洞身大部位于人工填土内,部分区域洞底人工填土厚度仍达2m。人工填土松散,自稳能力差,易发生塌落现象,不易成洞,施工难度大。为避免暗挖施工期间人工填土产生安全隐患并减少后期隧道变形,采用了袖阀管注浆技术对填土地层进行注浆加固,以确保工程施工安全及隧道工程质量&根据工程实施效果可见,袖阀管注浆加固对在人工填土中进行暗挖隧道开挖的沉降、变形控制的效果较好。 相似文献
13.
Deep-sea microorganism research has become a hot topic in life science, owing to its special value in high pressure and low temperature environment. If not kept the in-situ low temperature and high pressure, it will cause the microorganism to lose its activity and lead to a waste of resources. A freeze-sediments valve presents a promising solution to maintain the low temperature and high pressure in situ, improve the success rate of sampling and shorten the sampling time. A series of experiments were conducted to characterize the freeze-sediments valve, including the sampling time without leakage, adaptation to different sediments and the effect of the length, etc. Most important of all, temperature change of sediments is observed in all experiments. Experimental results indicated that the freeze-sediments valve was formed in 5 min without leakage and the freeze-sediments valve could be applied to different sediments without limitations on sediments type and mineral content. Considering the pressure retaining capacity and formation time of freeze-sediments valve, it was found that the freeze-sediments valve with a length of 60–80 mm has good pressure retaining capacity whose value was 41.3–48.4 Mpa and short formation time which was 5 min. Precooling the sampler could be used to shorten the sampling time in the actual environment application. This sampling technique can play a vital role in maintaining in-situ low temperature at −2 to −4 ° Celsius in all the experiments. According to the tests, the sampling technique based on the freeze-sediments valve had the potential to solve the problem of keeping in-situ temperature, low sampling success rate and long sampling time in the future. 相似文献
14.
15.
基于EOS/MODIS的若尔盖高原湿地定量遥感研究 总被引：1，自引：0，他引：1
研究旨在探讨EOS/MODIS影像提取若尔盖高原湿地信息的定量遥感方法.先计算MODIS影像的NDVI并将其线性变换到0～255;然后经多次试验确定区分湿地与非湿地的MODIS-NDVI阀值,并用人机交互式调整的方法消除误判像元及云的干扰,再多次试验得到区分湿地内部沼泽地和水体的阀值;通过统计不同类型湿地像元数计算湿地面积.研究表明,若尔盖高原湿地空间分布和面积具有季节差异,这与该地区降水和气温季节变化相关;采用MODIS-NDVI阀值并结合人机交互式调整的方法提取若尔盖高原夏半年的湿地信息是可行的,精度达到82%,而利用该方法提取冬半年湿地信息效果不甚理想,冬半年的MODIS影像湿地判识方法有待进一步探讨. 相似文献
16.
17.
An Oscillating Water Column (OWC) device can output energy through reciprocating or unidirectional airflow. The unidirectional airflow is helpful to utilize a simple and high-efficiency unidirectional air turbine. The pentagonal BBDB proposed by us based on OWC principle can be regarded as a floating Oscillating Body and its Power Take-Off (PTO) consists of a chamber, a water column, a turbine and a generator. The Capture Width Ratio (CWR) of the pentagonal BBDB model with the reciprocating and unidirectional airflow was studied in this paper. The wave flume test results indicate the mean CWR of the pentagonal BBDB model with reciprocating airflow can reach up to 121.91% and the mean CWR of the model with unidirectional airflow could reach 100.94% during the whole wave cycle in regular waves. For irregular waves, the mean CWR of the model with the unidirectional airflow is as high as 62.83% during the whole wave cycle. Hopefully, the combination of the pentagonal BBDB with the check valve to output power during the air exhalation and conventional high-efficiency unidirectional turbine will improve the total efficiency of the BBDB. 相似文献
18.
砂卵石地层具有地层结构松散、透水性高、粘聚力小、自稳能力差等特点,往往为工程施工带来许多难题。为了更好地研究砂卵石地层非开挖顶管施工时地表的沉降规律及相应的控制措施,以成都市华阳、万安、正兴片区雨污水管网W31-W32顶管段为研究对象,采用工法比较、数值模拟与现场实测相结合的方法,提出了适用于砂卵石地层地表沉降的控制措施。研究结果表明：在砂卵石地层中,采用袖阀管注浆加固管周土体与高压旋喷桩加固洞门的措施是合理有效的,加固后地表沉降量相较于未加固时降低了48.1%,洞门处的地表沉降量降低了51.1%,满足了地表沉降控制要求,验证了地层加固措施的效果,可为后续类似的非开挖顶管施工提供借鉴。 相似文献
19.
《地震研究进展（英文）》2021,1(1):100007
On February 3rd, 2020, an isolated MS5.1 earthquake occurred in the northern section of the Longquanshan fault zone. This study aims at defining the geometry of seismogenic structures of this earthquake. In detail, centroid moment tensor inversion results show that the earthquake is characterized by a focal depth of 3.8 km with no corresponding surface faults. The strike/dip/rake angles for the two nodal planes are 205°/54°/96° and 15°/36°/82°, respectively. With the analyses of coseismic deformation of the surface obtained from InSAR measurements, together with the information of relocated hypocenters for a small number of aftershocks, it is concluded that a northwest-dipping nodal plane corresponds well to the source fault. The fault is suggested to have a length of about 2.8 km and a depth range of 2–5 km, and the centroid of the earthquake is located at 104.48°E and 30.71°N. Furthermore, multiple pieces of evidence indicate that this earthquake is partly driven by the overpressure effect associated with the adjacent natural gas packets, which is similar to several other moderate natural earthquakes in Sichuan Basin. 相似文献
20.