初论地幔热柱与成矿——以冀西北金银多金属成矿区为例   总被引：22，自引：8，他引：14  

李红阳  阎升好  王金锁  张建珍  王国富 《矿床地质》1996,15(3):249-256

作者通过对冀两北金、银多金属矿化集中区成矿规律和物探航磁、重力及遥感信息的综合研究,提出冀西北地区存在一个超越内蒙地轴与燕山褶皱带两个不同历史大地构造单元之上的中生代地幔热柱构造。文中例举了地幔热梓构造标志特征,探讨了地幔热柱构造地质作用（超变质作用、岩浆作用、成矿作用）及其时空演化规律,建立了地幔热柱构造的壳幔成矿模式。  相似文献   

The origin of accretionary lapilli   总被引：1，自引：0，他引：1  

J. S. Gilbert  S. J. Lane 《Bulletin of Volcanology》1994,56(5):398-411

Experimental investigations in a recirculating wind tunnel of the mechanisms of formation of accretionary lapilli have demonstrated that growth is controlled by collision of liquid-coated particles, due to differences in fall velocities, and binding as a result of surface tension forces and secondary mineral growth. The liquids present on particle surfaces in eruption plumes are acid solutions stable at 100% relative humidity, from which secondary minerals, e.g. calcium sulphate and sodium chloride, precipitate prior to impact of accretionary lapilli with the ground. Concentric grain-size zones within accretionary lapilli build up due to differences in the supply of particular particle sizes during aggregate growth. Accretionary lapilli do not evolve by scavenging of particles by liquid drops followed by evaporation — a process which, in wind tunnel experiments, generates horizontally layered hemispherical aggregates. Size analysis of particles in the wind tunnel air stream and particles adhering to growing aggregates demonstrate that the aggregation coefficient is highly grain-size dependent. Theoretical simulation of accretionary lapilli growth in eruption plumes predicts maximum sizes in the range 0.7–20 mm for ash cloud thicknesses of 0.5–10 km respectively.  相似文献   

Low temperature volatile production at the Lost City Hydrothermal Field, evidence from a hydrogen stable isotope geothermometer   总被引：1，自引：0，他引：1  

Giora Proskurowski  Marvin D. Lilley  Deborah S. Kelley  Eric J. Olson 《Chemical Geology》2006,229(4):331-343

Although commonly utilized in continental geothermal work, the water-hydrogen and methane-hydrogen isotope geothermometers have been neglected in hydrothermal studies. Here we report δD-CH₄ and δD-H₂ values from high-temperature, black smoker-type hydrothermal vents and low-temperature carbonate-hosted samples from the recently discovered Lost City Hydrothermal Field. Methane deuterium content is uniform across the dataset at − 120 ± 12‰. Hydrogen δD values vary from − 420‰ to − 330‰ at high-temperature vents to − 700‰ to − 600‰ at Lost City. The application of several geothermometer equations to a suite of hydrothermal vent volatile samples reveals that predicted temperatures are similar to measured vent temperatures at high-temperature vents, and 20-60 °C higher than those measured at the Lost City vents. We conclude that the overestimation of temperature at Lost City reflects 1) that methane and hydrogen are produced by serpentinization at > 110 °C, and 2) that isotopic equilibrium at temperatures < 70 °C is mediated by microbial sulfate reduction. The successful application of hydrogen isotope geothermometers to low-temperature Lost City hydrothermal samples encourages its employment with low-temperature diffuse hydrothermal fluids.  相似文献   

Large eddy simulation of hydrocyclone—prediction of air-core diameter and shape     

M. Narasimha  Mathew Brennan  P.N. Holtham 《International Journal of Mineral Processing》2006

Hydrocyclones are widely used in the mining and chemical industries. An attempt has been made in this study, to develop a CFD (computational fluid dynamics) model, which is capable of predicting the flow patterns inside the hydrocyclone, including accurate prediction of flow split as well as the size of the air-core. The flow velocities and air-core diameters are predicted by DRSM (differential Reynolds stress model) and LES (large eddy simulations) models were compared to experimental results. The predicted water splits and air-core diameter with LES and RSM turbulence models along with VOF (volume of fluid) model for the air phase, through the outlets for various inlet pressures were also analyzed. The LES turbulence model led to an improved turbulence field prediction and thereby to more accurate prediction of pressure and velocity fields. This improvement was distinctive for the axial profile of pressure, indicating that air-core development is principally a transport effect rather than a pressure effect.  相似文献   

Subsurface thermal and hydrothermal characterization based on geothermal resources map, drill hole thermal gradients, Curie point depths and hypocenter distribution — Examples of Tohoku district, Japan     

S. Tamanyu  T. Sato  M. Kato   《Journal of Geochemical Exploration》2006,89(1-3):389

Subsurface thermal structure in Tohoku district are characterized by existing data such as geothermal resources maps, drill hole thermal gradients, Curie point depths and hypocenters distribution maps. The collected data are registered in a database system, then, compared in plan view, cross-section and bird's-eye pictures. The comparison indicates that subsurface temperatures extrapolated from drill hole thermal gradients are generally concordant to the Curie point depth, assumed to be 650 °C. Tohoku district is generally divided into 5 type areas; fore arc lowland, fore arc mountain country, Quaternary volcanic terrain, back arc lowland and back arc mountain country. The surface thermal manifestations in Quaternary volcanic terrain are mainly controlled by the magma chambers as heat sources, while, surface thermal features such as hot springs in non-volcanic areas are controlled by degrees of heat flows, and hydrothermal flows in permeable Cenozoic formations and along permeable fault zones.  相似文献   

水热法提纯制备氢氧化镁的研究          下载免费PDF全文

闫修川  李召好  马培华  李法强  邓小川 《盐湖研究》2006,14(1):36-39

以盐湖工业副产物氢氧化镁作为原料，在水热条件下，对氢氧化镬进行溶解——重结晶除杂。并对水热后氢氧化镁产品进行了表征，结果令人满意。  相似文献   

Conceptual hydrodynamic model of the Pamukkale hydrothermal field, southwestern Turkey, based on hydrochemical and isotopic data   总被引：4，自引：1，他引：4  

Cüneyt Dilsiz 《Hydrogeology Journal》2006,14(4):562-572

The results of study on the hydrochemical and isotope characteristics of shallow and deep waters at Pamukkale hydrothermal field Turkey are described in order to obtain a better understanding of the hydrological circulation. The field can be grouped into two groundwater sub-systems; cold water springs of Ca–HCO₃ type (10–12 °C), and CO₂-rich thermal waters of Ca–HCO₃–SO₄ type (25–58 °C). The occurrence of these water types is closely related to the morphology of the region, where intense tectonism formed horst and graben structures. Hence, two hydrogeological systems were defined: a deep geothermal system which is related to extensive and deep circulation of meteoric water in the regional flow system, and a shallow system which is related to local groundwater flow through sedimentary strata. The meteoric water falling at higher elevations percolates to the local groundwater system at a shallow level and flows to the deep geothermal system. During a deep convection cycle from a recharge to discharge area, the cold water attains heat from the asthenospheric intrusions, causing it to ascend. Variations of chemical and isotopic composition of thermal waters result from their mixing with cool groundwater in a shallow aquifer during their ascent to the surface.

---

Résumé Les résultats d'une étude portant sur les caractéristiques hydrochimiques et isotopiques de puits phréatiques et profonds situés dans le champ hydrothermal de Pamukkale, sont décrits de telle manière à éclairer le fonctionnement des circulations hydrologiques. Le champ peut étre divisé en deux sous-systèmes d'eaux souterraines, l'un avec des eaux de sources froides (10–12 °C) de type Ca–HCO3, et les eaux thermales (25–58 °C) riches en CO₂ et de type Ca–HCO₃–SO4. L'occurrence de ces types d'eaux est fermement liée à la morphologie de la région, oùne tectonique intense a engendré des structures en horsts et en grabens. Dés lors deux systèmes hydrogéologiques ont été définis : un système profond, qui est lié à la circulation extensive et profonde des eaux météoritiques dans le système régional d'écoulement, et un système phréatique lié aux écoulements locaux des eaux souterraines à travers les strates sédimentaires. Les eaux météoritiques aux altitudes élevées, percolent jusqu'aux systèmes locaux phréatiques, puis coulent jusqu'aux systèmes géothermaux plus profonds. Durant le cycle de convection profond des zones de recharge jusqu'aux zones de décharge, l'eau froide atteint les zones chaudes liées aux intrusions athenosphériques, provoquant la remontée. Les variations de la composition chimique et isotopique des eaux thermales résultent dans leurs mélanges avec des eaux souterraines froides dans les aquifères phréatiques durant leur remontée jusqu'à la surface.

---

Resumen Se describen los resultados del estudio de las características isotópicas e hidroquímicas de las aguas someras y profundas para obtener un mejor entendimiento de la circulación hidrológica del campo hidrotermal Pamukkale. El campo puede agruparse en dos sub-sistemas de agua subterránea: manantiales de agua fría del tipo Ca–HCO₃ (10–12°C) y aguas termales ricas en CO₂ del tipo Ca–HCO₃–SO₄(25–58°C). El ambiente de estos tipos de aguas se relaciona estrechamente con la morfología de la región donde el tectonismo intenso ha formado estructuras extensionales tipo graben y horst. Se definieron dos sistemas hidrogeológicos: un sistema geotermal profundo que se relaciona con la circulación profunda y extensa de agua meteórica en el sistema regional de flujo y un sistema somero el cual se relaciona con flujo local de agua subterránea a través de estratos sedimentarios. El agua meteórica que cae en altas elevaciones percola al sistema local de agua subterránea en un nivel somero y fluye hacia el sistema geotermal profundo. Durante un ciclo de convección del área de recarga hacia la zona de descarga, el agua fría se calienta a partir de los intrusivos astenosféricos lo que ocasiona que asciendan. Como resultado de la mezcla de las aguas recalentadas, con agua subterránea fría en un acuífero somero durante el ascenso hacia la superficie, se derivan variaciones en la composición química e isotópica de las aguas termales.

  相似文献   

Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia     

Geordie Mark  Nicholas H. S. Oliver  Patrick J. Williams 《Mineralium Deposita》2006,40(8):769-801

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.  相似文献   

3D behaviour of contamination in landfill sites using 2D resistivity/IP imaging: case studies in Portugal   总被引：2，自引：0，他引：2  

E. Martinho  F. Almeida 《Environmental Geology》2006,49(7):1071-1078

Aiming at defining a valid spatial contamination model, resistivity and induced polarization (IP) measurements were used to investigate contamination plumes in the vicinity of two municipal landfills (Ovar and ílhavo). Previous geophysical surveys and underground water samples confirmed the contamination. However 2D resistivity/IP surveys enabled in obtaining a more accurate spatial model. The Ovar survey consisted of two profiles with nine Wenner soundings each; the ílhavo survey was carried out along two individual lines using a Wenner standard pseudo-section. In both situations, negative IP values were found associated with positive IP values, which can be explained mainly by 2D or 3D geometric effects caused by the presence of the conductive plumes. The data were modelled using a 2D inversion program (RES2DINV) and the resulting resistivity and chargeability distributions were displayed as pseudo-sections. The resistivity and chargeability pseudo-sections define the contamination plumes and the sedimentary structure. These case studies illustrate the advantages of 2D resistivity/IP surveys for the mapping of shape and dimension of contamination associated with landfills.  相似文献   

Structural controls on Tertiary orogenic gold mineralization during initiation of a mountain belt, New Zealand   总被引：3，自引：2，他引：3  

D. Craw  M. Begbie  D. MacKenzie 《Mineralium Deposita》2006,41(7):645-659

Two types of structurally controlled hydrothermal mineralization have occurred during folding of fissile schist in southern New Zealand: fold-related mineralization and normal fault-related mineralization. Both types have the same mineralogy and textures, and are dominated by quartz–ankerite veins and silicified breccias with ankeritic alteration. Most mineralized zones are thin (centimetre scale), although host schist is commonly impregnated with ankerite up to 20 m away. Thick (up to 5 m wide) mineralized zones are generally gold-bearing and contain pyrite and arsenopyrite with stibnite pods locally. Some of these auriferous zones have been extensively mined historically despite rugged topography and difficult access. Mineralization occurred during regional tectonic compression in the initial stages of development of the Southern Alps mountain belt at the Pacific–Australian plate boundary in the Miocene. Most of the gold-bearing deposits occur in east to south-east, striking normal faults that cut across mesoscopic folds in a belt that coincides with the southern termination of a regional-scale north trending antiform. Mineralized zones have similar structural control and relative timing to a nearby swarm of Miocene lamprophyre dykes and carbonatites. Limited stable isotopic data (C and O) and trace element geochemistry suggest that there was probably no genetic link between the igneous activity and gold mineralization. However, these two types of fluid flow have been controlled by the same tectonically created crustal plumbing system. This Miocene hydrothermal activity and gold deposition demonstrates that orogenic (mesothermal) mineralization can occur during the inception of an orogenic belt, not just in the latter stages as is commonly believed. These Miocene structures have been preserved in the orogen because the locus of uplift has moved northwards, so the early-formed gold deposits have not yet been structurally overprinted or eroded.  相似文献