Statistical analysis of sand grain/bed collision process recorded by high-speed digital camera   总被引：1，自引：0，他引：1  

DAWEI WANG  YUAN WANG  BIN YANG  WEI ZHANG† 《Sedimentology》2008,55(2):461-470

A high‐speed digital camera was employed to record the sand grain/bed collision process. With image processing and a statistical method, a series of parameters of the collision process were obtained. The results show that the collision process of a grain with rebounding can be represented by two parameters: the kinetic energy restitution coefficient and the collision angle. Both parameters satisfy a normal distribution, and they are dependent on one another. With an increase of the collision angle, the distribution of the kinetic energy restitution gradually reduces from a broad to a narrow range with low values. The percentage of vertical velocity restitution coefficients greater than 1 can reach 70% or more, which ensures that the settling time of the sand grains in the air increases and that they receive more energy from the air to progress the saltation movement.  相似文献   

Techniques to measure grain-size distributions of loamy sediments: a comparative study of ten instruments for wet analysis   总被引：2，自引：0，他引：2  

DIRK GOOSSENS 《Sedimentology》2008,55(1):65-96

Ten instruments for measuring the grain‐size distribution of loamy sediments in water were tested in a comparative study. Instruments tested were: the Malvern Mastersizer S, the Coulter LS 200, the Fritsch Analysette 22 (version C), the Horiba Partica LA‐950, the Sedigraph 5100, the Atterberg cylinder, the Coulter Multisizer 3, the CIS‐100, the EyeTech and the image analysis software Histolab. The first four instruments use laser diffraction. The Sedigraph and Atterberg cylinder are based on sedimentation. The Coulter Multisizer 3 uses impedance measurements and the last three instruments use optical techniques. Grain‐size analyses were carried out on four sediments with median grain diameters of approximately 35, 30, 12 and 9 μm, respectively, and with no particles >90 μm. The laser diffraction instruments produced the best results for the various criteria considered in this study, followed by the Coulter Multisizer 3 (electrical sensing zone technique), the sedimentation techniques and the optical methods. However, the study also showed that there is no such thing as an ‘ideal’ method because techniques may score differently according to the criterion tested. An appropriate evaluation thus requires that various criteria be considered. Issues to be taken into account are: type of sediment, quantity of sediment available, speed of measurement, complexity of the measurement protocol, processing of the data, reproducibility of the results and the specific aims of the study undertaken.  相似文献   

Mapping Proterozoic unconformity-related uranium deposits in the Rockhole area, Northern Territory, Australia using landsat ETM+     

H.M. Rajesh   《Ore Geology Reviews》2008,33(3-4):382-396

The Rockhole area, Northern Territory, Australia, hosts a number of Proterozoic unconformity-related uranium deposits. The geology of the area features within Paleoproterozoic rocks of the Pine Creek Orogen, near the unconformity with overlying platform cover sandstone of the Paleo- to Mesoproterozoic McArthur Basin. Landsat Enhanced Thematic Mapper plus (ETM+) data was used in the Rockhole area to assist in mapping geological structures and lithology, and to identify anomalous concentrations of ferrous minerals, the product of alteration, which can be indicators of buried uranium mineralization. Several image-processing procedures were applied to the ETM+ data to identify, isolate and enhance mineralogical information as simple and complex false color composites. ETM+ 754 shown as red green and blue respectively was the best simple image. Overall, complex images based on Principal Component Analysis proved to be the most useful products. Sandstone, shale and siltstone, the target lithologies, Koolpin Formation, the target stratigraphic unit, and bleaching pattern due to the removal of iron(II) compounds, the target alteration pattern, were confidently mapped to provide information required by the mineral emplacement model, which ultimately identified areas of likely uranium mineralization. Thus the contrasting behavior of the two principle oxidation states of uranium and iron can be utilized to map/delineate bleached alteration zones associated with economic concentrations of uranium using multispectral sensors like Landsat or better hyperspectral sensors.  相似文献   

A preliminary stable isotope study on Mogok Ruby, Myanmar     

Tzen-Fu Yui  Khin Zaw  Chao-Ming Wu 《Ore Geology Reviews》2008,34(1-2):192

The primary occurrence of ruby in the Mogok area, northern Myanmar is exclusively found in marble along with spinel–forsterite-bearing marble and phlogopite–graphite marble. These marble units are enclosed within banded biotite–garnet–sillimanite–oligoclase gneisses. Samples of these marbles collected for C–O stable isotope analysis show two trends of δ¹³C–δ¹⁸O variation resulting most likely from fluid–rock interactions. Ruby-bearing marble and phlogopite–graphite marble follow a trend with coupled C–O depletion, whereas spinel–forsterite-bearing marble follows a δ¹⁸O depletion trend with relatively constant δ¹³C values. Ruby formation might have resulted from CO₂-rich fluid–rock interaction, while spinel–forsterite-bearing marble was genetically related to CO₂-poor fluid–rock interaction. Both fluids may have arisen from external sources. Based on graphite Raman spectral thermometry, the estimated temperature for phlogopite–graphite marble, and probably ruby-bearing marble, was lower than 607 °C, and for spinel–forsterite-bearing marble, lower than 710 °C. Contrasting C/O diffusion between graphite/ruby/spinel/forsterite and calcite, local variations of isotopic compositions of newly formed minerals as a result of non-pervasive fluid infiltration, and open-system isotopic disturbance during cooling may have affected C-/O-isotopic fractionations between minerals. The estimated high formation temperatures for ruby and spinel/forsterite imply that the parental fluids may have been related to nearby igneous intrusions and/or metamorphic processes. Whether these two types of fluid were genetically related is unclear based on the present data.  相似文献   

“Cretaceous black flysch” in the Pieniny Klippen Belt, West Carpathians: a case of geological misinterpretation     

Krzysztof Birkenmajer  Przemys&#x;aw Gedl  Ryszard Myczy&#x;ski  Jaros&#x;aw Tyszka 《Cretaceous Research》2008,29(3):535-549

This is a critical assessment of the paper by Oszczypko et al. (2004: Cretaceous Research 25, 89–113), in which they tried to prove a mid-Cretaceous age for the Szlachtowa (“black flysch”) and Opaleniec Formations, in the Pieniny Klippen Belt, West Carpathians, both of which had previously been shown to be of Jurassic age. We argue that the mid-Cretaceous age assignment is a misinterpretation, primarily resulting from their field samples having been collected from some Cretaceous lithostratigraphic units, tectonically associated with the Jurassic formations, and/or from tectonic contact-breccias involving Jurassic and Cretaceous strata. In addition, we suggest that they have overlooked a number of significant palaeontological papers, published since 1962, which record the presence of in situ ammonites, aptychi, belemnites, thin-shelled bivalves (Bositra), gryphaeids, foraminifera, and ostracod assemblages, all indicating a Jurassic (mainly Aalenian), and not a Cretaceous, age for the Szlachtowa Formation, and also the in situ Jurassic (Bajocian) ammonites and thin-shelled bivalves (Bositra), Bositra-microfacies, and age-diagnostic foraminiferal assemblages of the Opaleniec Formation.Our presentation here of recently published dinocyst data from well-preserved assemblages further supports the Jurassic ages for the Szlachtowa (“black flysch”) and Opaleniec Formations.  相似文献   

气相色谱法测定地下水中六六六结果的不确定度评定   总被引：7，自引：4，他引：3  

李松  饶竹 《岩矿测试》2008,27(4):295-298

依照《测量不确定度评定与表示》,对气相色谱法测定地下水中六六六(HCH)四种单体结果进行了不确定度评定。分析了测量过程中引入的不确定度来源,包括提取液体积的量取、样品提取溶液的定容体积、分析仪器的进样量、标准系列溶液的测量以及仪器重复测定等分量引入不确定度及其各参数的采集和计算方法,最后合成标准不确定度,通过乘以95%概率下的扩展因子2,获得测量结果的扩展不确定度。  相似文献   

多接收器电感耦合等离子体质谱法测定镉标准溶液中镉的同位素组成   总被引：1，自引：1，他引：0  

高博  梁细荣  刘颖  胡光黔  曾文  涂湘林 《岩矿测试》2008,27(5):321-324

建立了多接收器电感耦合等离子体质谱仪对Cd标准溶液同位素组成进行分析的实验方法。仪器的质量分馏校正采用Standard-Sample Bracketing法。实验结果用δ114/110Cd来表达。在此研究基础上,以SPEX Cd标准溶液为参考标准,对国外4种Cd标准溶液进行了测定。结果表明,实验测定的精度在0.07‰~0.13‰(δ114/110Cd),与目前文献报道的结果具有相似的精度。以最新SPEX Cd标准样品(δ114/110Cd=0)为基准,计算的δ114/110CdJMC、δ114/110CdSPEX-1、δ114/110CdBAM1012和δ114/110CdM櫣nster的值分别为0.55‰、0.56‰、-0.65‰和5.14‰,说明不同批次SPEX标准溶液的Cd同位素组成是明显不同的,最新的SPEX Cd标准溶液与SPEX-1 Cd的δ114/110Cd值存在着0.56‰的差别。将以SPEX Cd为参考标准的δ114/110CdBAM1012和δ114/110CdM櫣nster转化为以SPEX-1或JMC为参考标准后,得到的结果与文献报道的结果在误差范围内一致。  相似文献   

碱消解-高效液相色谱-电感耦合等离子体质谱法测定生物样品中的甲基汞和乙基汞   总被引：7，自引：2，他引：5  

杨红霞  刘崴  李冰 《岩矿测试》2008,27(6):405-408

建立了碱消解-高效液相色谱-电感耦合等离子体质谱联用系统测定生物样品中甲基汞(MeHg)与乙基汞(EtHg)的分析方法。为提高灵敏度,选用微流量的PFA雾化器,在优化的检测条件下,MeHg及EtHg检出限可达到0.036μg/L和0.03μg/L;线性范围达到4个数量级,两条工作曲线线性相关系数为1。对1.78μg/L MeHg、1.65μg/L EtHg的混合标准溶液重复测定7次,色谱峰面积的相对标准偏差(RSD)分别为1.79%和1.44%。对标准物质BCR 464(金枪鱼)的分析结果表明,测定值与标准值基本吻合,但略低于标准值;甲基汞和乙基汞的加标回收率分别为85.9%和84.5%。高效液相色谱与质谱联用技术的高灵敏度和低检出限能够满足生物样品中汞形态定量分析的要求。  相似文献   

徐州土壤多环芳烃的环境地球化学迁移特征   总被引：1，自引：1，他引：0  

葛晓立  焦杏春  袁欣  李奇  罗松光  孙玮琳 《岩矿测试》2008,27(6):409-412

选择江苏徐州黄棕壤进行不同深度层位多环芳烃含量的定量分析,研究并探讨了多环芳烃在土壤深度剖面中的地球化学迁移特征。研究结果显示,多环芳烃在徐州土壤剖面中主要集中在地表0~20 cm内。其中低环多环芳烃化合物的迁移能力较强,4~6环等高环化合物相对较难迁移,主要残留于地表生态系统环境中。  相似文献   

XEPOS型偏振能量色散X射线荧光光谱仪分析蒙古铁矿石   总被引：5，自引：4，他引：1  

耿刚强  宁国东  王巧玲  丁慧  朱明达  白福全  董海成  牛素琴  王再田 《岩矿测试》2008,27(6):423-426

以熔融玻璃片和粉末压片制样,采用XEPOS型偏振能量色散X射线荧光光谱仪,建立了铁矿石中总铁、氧化钙、氧化镁、二氧化硅、三氧化二铝、硫、磷、铜等组分的快速分析方法。着重讨论硫、磷两元素测定的可行性和Lucas-Tooth、Price数学校正模型的适应性和改善方法的途径。  相似文献