排序方式： 共有34条查询结果，搜索用时 203 毫秒
11.
龚明杰 《测绘与空间地理信息》2022,45(1):198-199
为解决大范围复杂山区DEM生产困难的问题,提出利用机载LiDAR点云数据构建DEM.本文对机载LiDAR数据处理流程及其在复杂山区的具体应用进行分析,主要利用LiDAR数据处理软件对点云数据进行内业DEM生产并编辑最终得到符合项目要求的数字高程模型数据,结果证明该方法可行. 相似文献
12.
Coastal groundwater systems can have a considerable impact on sediment transport and foreshore evolution in the surf and swash zones. Process-based modeling of wave motion on a permeable beach taking into account wave-aquifer interactions was conducted to investigate the effects of the unconfined coastal aquifer on beach profile evolution, and wave shoaling on the water table. The simulation first dealt with wave breaking and wave runup/rundown in the surf and swash zones. Nearshore hydrodynamics and wave propagation in the cross-shore direction were simulated by solving numerically the two-dimensional Navier–Stokes equations with a k–ε turbulence closure model and the Volume-Of-Fluid technique. The hydrodynamic model was coupled to a groundwater flow model based on SEAWAT-2000, the latter describing groundwater flow in the unconfined coastal aquifer. The combined model enables the simulation of wave-induced water table fluctuations and the effects of infiltration/exfiltration on nearshore sediment transport. Numerical results of the coupled ocean/aquifer simulations were found to compare well with experimental measurements. Wave breaking and infiltration/exfiltration increase the hydraulic gradient across the beachface and enhance groundwater circulation inside the porous medium. The large hydraulic head gradient in the surf zone leads to infiltration across the beachface before the breaking point, with exfiltration taking place below the breaking point. In the swash zone, infiltration occurs at the upper part of the beach and exfiltration at the lower part. The simulations confirm that beaches with a low water table tend to be accreted while those with a high water table tend to be eroded. 相似文献
13.
SRTM DEM高程精度评价 总被引：6，自引：1，他引：5
为了全面认识SRTM DEM数据精度特征并完善SRTM DEM数据精度评定方法,该文以我国1∶5万比例尺DEM为参考数据,以具有多种地貌类型的陕西省为实验样区,利用高程中误差模型及空间插值方法对SRTMDEM进行高程精度分析。结果表明:陕西省的SRTM DEM高程中误差在3.5~60.7 m,呈现出较为显著的空间分异特征;并且高程中误差与实验样区平均坡度有较强的指数相关性,拟合的指数函数具有较高的模拟精度。 相似文献
14.
NCEP/NCAR再分析风速、表面气温距平在中国区域气候变化研究中的可信度分析 总被引：22，自引：0，他引：22
采用计算标准化均方根误差、相关分析和EOF分解等多种客观分析统计方法,对NCEP/NCAR再分析风速、表面气温距平在中国区域的可信度进行了研究,结果表明中国东部不同要素距平的标准化均方根误差均比西部地区的小,说明NCEP/NCAR再分析资料的可信度东部比西部要高,可能是受到模式地形和中国地面气象站点“东密西疏”分布格局的较大影响。随着高度升高,NCEP再分析风速距平的误差减小,进一步表明地形对NCEP再分析资料的可信度具有较大影响。另外,冬季再分析风速误差较大的特点在850,500和200 hPa等压面上均存在,表明冬季再分析风速距平的可信度受到再分析模式系统误差的较大影响。相关分析结果和标准化均方根误差计算结果之间具有很好的反向对应关系,即均方根误差大,NCEP再分析资料与实测资料的相关性就差,均方根误差小,则对应两者之间的相关性就较好。标准化均方根误差较小的要素,其NCEP再分析和站点实测资料距平EOF分解得到的特征向量空间分布较为相似,各特征向量对应时间系数的相关性也比较好;反之,标准化均方根误差大的要素,其NCEP再分析和站点实测资料距平EOF分解得到的特征向量空间分布则相差较大,对应时间系数的相关性也比较差,因此采用EOF分解方法,分析对应特征向量空间分布相似性及其时间系数变化的一致性,可以对NCEP再分析资料的可信度有一个更加客观的认识。综合上述各季节、各要素多种方法的分析结果,可以发现NCEP再分析风速距平在春、夏、秋季具有一定的可信度,但冬季的可信度较差;表面气温距平则是冬季的可信度最好,夏季的可信度较差。 相似文献
15.
本文以山西省西山煤田某一工作面为试验区,在分析地面沉降全球卫星导航系统（GNSS）监测数据特征的基础上,利用两种卡尔曼滤波方法（普通和总体卡尔曼滤波）对矿区地面沉降GNSS监测数据进行了处理与评价,同时对比了两种卡尔曼滤波方法的均方根误差分布情况。试验结果表明,两种滤波方法的滤波结果与观测值趋势大致相同,但存在少数异常点。下沉量越大的监测点,滤波结果与观测值的差异越大,但总体卡尔曼滤波的差异明显小于普通卡尔曼滤波,特别是对于下沉量较大的监测点。下沉量越大的监测点,其均方根误差越大,总体卡尔曼滤增大的速度远小于普通卡尔曼滤波,总体卡尔曼滤波均方根误差的最大值小于0.1 m,普通卡尔曼滤波的则接近0.4 m。 相似文献
16.
利用全球中期预报模式T63L9,选取2004年6月4日至13日10d作为试验个例进行了集合预报试验,分析了不同集合成员个数对于预报结果的影响。结果表明,集合预报的技巧都明显高于单个控制预报。在集合成员较少时,随集合成员教的增加,集合预报的技巧提高明显,当集合成员数多于11个时,集合预报的效果提高缓慢。在中期预报时段内。集合成员数11为集合预报效果随集合成员教趋于饱和的临界值,如果继续增加成员数.预报效果提高较少,但计算量却大大的增加。本文只是单个试验个例的分析结果。为验证结论的普适性,还需要进行更多的试验。 相似文献
17.
东印度洋天气和风暴潮实时预报系统（EPMEF_EIO）由区域大气模式和区域风暴潮模型组成,每天实时运行4次.大气初边场来自美国国家环境预报中心（NCEP）的全球预测系统（GFS）,通过区域嵌套得到印度洋-东印度洋-斯里兰卡区域的3 d预报结果.大气模式的10 m预报风场驱动风暴潮模式,得到东印度洋-斯里兰卡区域的潮汐和风暴潮3 d预报结果.通过与中国科学院南海海洋研究所斯里兰卡站气象塔观测数据、最优台风路径数据和科伦坡水位站数据对比,发现模式预报气温和相对湿度的日变化较观测值偏小,气温总体RMSE为1.26℃,相关系数为0.8,相对湿度的总体RMSE为7.0%,相关系数为0.7;模式预报风速以整体偏大为主,总体RMSE为2.3 m/s,相关系数为0.65;模式预报风向能把握主要的变化趋势,RMSE在20°~32°之间,相关系数约0.65;模式24、48和72 h路径预报平均误差分别为110.5、166.4和181.0 km.此外,模式水位预报的RMSE为0.035 m,占最大振幅约5%,与观测的相关系数达到0.996.这说明了模式可以用于预报潮汐和风暴潮过程. 相似文献
18.
19.
Comment on ‘Positional accuracy of the Google Earth terrain model derived from stratigraphic unconformities in the Big Bend region, Texas, USA’ by S.C. Benker, R.P. Langford and T.L. Pavlis (Geocarto Int. 26:291–303, doi: 10.1080/10106049.2011.568125). 相似文献
20.
Accurately mapping the spatial distribution of soil total nitrogen is important to precision agriculture and environmental management. Geostatistical methods have been frequently used for predictive mapping of soil properties. Recently, a local regression method, geographically weighted regression (GWR), got the attention of environmentalists as an alternative in spatial modeling of environmental attributes, due to its capability of incorporating various auxiliary variables with spatially varied correlation coefficients. The objective of this study is to compare GWR and ordinary cokriging (OCK) in predictive mapping of soil total nitrogen (TN) using multiple environmental variables. 353 soil Samples within the surface horizon of 0–20 cm in a study area were collected, and their TN contents were measured for calibrating and validating the GWR and OCK interpolations. The environmental variables finally chosen as auxiliary data include elevation, land use types, and soil types. Results indicate that, although OCK is slightly better than GWR in global accuracy of soil TN prediction (the adjusted R2 for GWR and OCK are 0.5746 and 0.6858, respectively), the soil TN map interpolated by GWR shows many details reflecting the spatial variations of major auxiliary variables while OCK smoothes out almost all local details. Geographically weighted regression could account for both the spatial trend and local variations, whilst OCK had difficulties to capture local variations. It is concluded that GWR is a more promising spatial interpolation method compared to OCK in predicting soil TN and potentially other soil properties, if a suitable set of auxiliary variables are available and selected. 相似文献