Contour scaling of a sandstone by salt weathering under simulated hot desert conditions     

B. J. Smith  J. P. McGreevy 《地球表面变化过程与地形》1988,13(8):697-705

A laboratory study has been used to investigate relationships between salts and contour scaling—a weathering feature commonly observed on rock surfaces in salt-rich environments. Surface disaggregation and essentially surface-parallel cracks were produced in sandstone blocks using 10 per cent solutions of sodium sulphate and magnesium sulphate applied daily to single exposed surfaces for sixty days. A control block soaked once in saturated magnesium sulphate and subsequently wetted daily with distilled water showed extensive surface disaggregation, but no cracking. Both surface disaggregation and subsurface cracking were associated with relative concentrations of microcrystalline salt. A tentative model of contour scaling is proposed, which involves linking together potential cracks by salt-induced fracturing of intervening, crack-stopping grains. Further control blocks treated respectively with 10 per cent and saturated sodium chloride showed no evidence of subsurface cracking and only limited surface disaggregation of the ‘saturated’ block.  相似文献   

Sedimentary record of the northward flight of India and its collision with Eurasia (Ladakh Himalaya,India)     

Eduardo Garzanti  Aymon Baud  Georges Mascle 《Geodinamica Acta》2013,26(4-5):297-312

Abstract

— Stratigraphic and petrographic analysis of the Cretaceous to Eocene Tibetan sedimentary succession has allowed us to reinterpret in detail the sequence of events which led to closure of Neotethys and continental collision in the NW Himalaya.

During the Early Cretaceous, the Indian passive margin recorded basaltic magmaüc activity. Albian volcanic arenites, probably related to a major extensional tectonic event, are unconformably overlain by an Upper Cretaceous to Paleocene carbonate sequence, with a major quartzarenite episode triggered by the global eustatic sea-level fall at the Cretaceous/Tertiary boundary. At the same time, Neotethyan oceanic crust was being subducted beneath Asia, as testified by calc-alkalic volcanism and forearc basin sedimentation in the Transhimalayan belt.

Onset of collision and obduction of the Asian accretionary wedge onto the Indian continental rise was recorded by shoaling of the outer shelf at the Paleocene/Eocene boundary, related to flexural uplift of the passive margin. A few My later, foreland basin volcanic arenites derived from the uplifted Asian subduction complex onlapped onto the Indian continental terrace. All along the Himalaya, marine facies were rapidly replaced by continental redbeds in collisional basins on both sides of the ophiolitic suture. Next, foreland basin sedimentation was interrupted by fold-thrust deformation and final ophiolite emplacement.

The observed sequence of events compares favourably with theoretical models of rifted margin to overthrust belt transition and shows that initial phases of continental collision and obduction were completed within 10 to 15 My, with formation of a proto-Himalayan chain by the end of the middle Eocene.  相似文献   

Revolution in earth history     

A. F. Trendall 《Australian Journal of Earth Sciences》2013,60(3):287-311

  相似文献   

An investigation of recharge to the northern Adelaide plains aquifers using environmental tritium     

G. B. Allison  J. W. Holmes  M. W. Hughes 《Australian Journal of Earth Sciences》2013,60(4):497-500

Recharge to the Quaternary aquifers beneath the Northern Adelaide Plains was estimated to be 3.9 x 10⁶ m³/year using the environmental tritium concentration of water samples taken from suitably sited boreholes. Recharge to the Tertiary aquifers was estimated to be 0.4 x 10⁶m³/year, by the same isotopic techniques. These results may be compared with a total recharge by leakage through the beds of streams which cross the plain, estimated by the South Australian Department of Mines to be 6.4 x 10⁶ m³/year.  相似文献   

Engineering aspects of weathered dolomite in an arid zone     

F. C. Beavis 《Australian Journal of Earth Sciences》2013,60(1-2):191-204

Two bores were drilled in the weathered zone of a Precambrian dolomite at Fowler's Gap, 100 km N of Broken Hill, New South Wales. Five weathering units have been distinguished: fresh dolomite; weathered dolomite, type B; weathered dolomite, type A; ferricrete; and surface hardened dolomite. Physical and mechanical properties show variation throughout the weathering profile, and are related to the fabric of the rock, especially to the fracturing intensity, which is a function of degree of weathering; and to secondary surface silicification. A tentative engineering classification of the weathered dolomite is proposed.  相似文献   

Fluvial architecture and diagenesis of the Mt Eclipse Sandstone,northern Ngalia Basin,Australia     

S. Schmid  M. A. Quigley 《Australian Journal of Earth Sciences》2013,60(8):1081-1094

The Upper Devonian to Carboniferous Mt Eclipse Sandstone is a basin-wide host to uranium mineralisation in the Ngalia Basin, NT. The fluvial depositional architecture and diagenesis of the Mt Eclipse Sandstone at the Bigrlyi uranium deposit on the northern margin of the basin are deduced from hyperspectral mineral results captured from 200 drill holes, combined with core and outcrop observations across a ~10 km strike length. The succession hosting the uranium mineralisation is interpreted to be deposited in the lower parts of a mature alluvial fan system with low slope angle and dominated by immature, kaolinised, medium-grained subarkosic sandstones and patchy calcite cement. This study reveals the fluvial channel sequence is estimated to be 3 km wide, 100–200 m thick and sourced from the north. This multidisciplinary study also uncovers the complex interaction and codependencies between fluvial/groundwater activity, evaporation, oxidation, fluctuating pH and detrital mineralogy controlling early diagenetic processes in the alluvial fan sediments. Carbon isotope data identify calcite cements as groundwater calcrete, while strontium isotope data suggest limited prolonged water–rock interaction prior and during calcite cementation. The petrographic data reveal the importance of early calcite cement occluding all pore space and preserving detrital minerals from later diagenetic processes. The hyperspectral results highlight the intermittent distribution of the calcite cement and the commonly repetitive mineralogical zonation throughout the 200 drill holes, including the inverse spatial correlation between kaolinite ± goethite ± gypsum vs white mica ± hematite dominated zones. X-ray diffraction and the hyperspectral data reveal the scarcity of early diagenetic clay minerals such as montmorillonite. This paper is the first to report on a systematic mineralogical and sedimentological study for the Mt Eclipse Sandstone. By focusing on the diagenesis and fluvial architecture of this stratigraphic unit, a framework to support exploration for sediment-hosted uranium deposits is established.  相似文献   

回灌水温对砂岩热储回灌效果的影响分析——以德州市地热田馆陶组热储为例     

张平平  王秀芹 《山东国土资源》2015,31(6)

根据砂岩孔隙型热储地热流体回灌试验中不同尾水温度与回灌量、回灌水位之间的关系,研究了相同回灌量条件下尾水温度对回灌效果的影响,并通过消除回灌尾水温度对井筒存储效应的影响,将回灌时水位升幅的观测值校正为同一温度下的真实水位升幅,从而对不同温度尾水回灌的渗透性能进行了分析。  相似文献   

Changes in physical properties of a reservoir sandstone as a function of burial depth – The Etive Formation,northern North Sea     

Øyvind Marcussen  Tom Erik MaastNazmul H. Mondol  Jens JahrenKnut Bjørlykke 《Marine and Petroleum Geology》2010

Rock physical properties, like velocity and bulk density, change as a response to compaction processes in sedimentary basins. In this study it is shown that the velocity and density in a well defined lithology, the shallow marine Etive Formation from the northern North Sea increase with depth as a function of mechanical compaction and quartz cementation. Physical properties from well logs combined with experimental compaction and petrographic analysis of core samples shows that mechanical compaction is the dominant process at shallow depth while quartz cementation dominates as temperatures are increased during burial. At shallow depths (<2000–2500 m, 70–80 °C) the log derived velocities and densities show good agreement with results from experimental compaction of loose Etive sand indicating that effective stress control compaction at these depths/temperatures. This indicates that results from experimental compaction can be used to predict reservoir properties at burial depths corresponding to mechanical compaction. A break in the velocity/depth gradient from about 2000 m correlates with the onset of incipient quartz cementation observed from petrographic data. The gradient change is caused by a rapid grain framework stiffening due to only small amounts of quartz cement at grain contacts. At temperatures higher than 70–80 °C (2000–2500 m) the velocities show a strong correlation with quartz cement amounts. Porosity reduction continues after the onset of quartz cementation showing that sandstone diagenesis is insensitive to effective stress at temperatures higher than 70–80 °C. The quartz cement is mainly sourced from dissolution at stylolites reflected by the fact that no general decrease in intergranular volume (IGV) is observed with increasing burial depth. The IGV at the end of mechanical compaction will be important for the subsequent diagenetic development. This study demonstrates that mechanical compaction and quartz cementation is fundamentally different and this needs to be taken into consideration when analyzing a potential reservoir sandstone such as the Etive Formation.  相似文献   

Systematic sequence-scale controls on carbonate cementation in a siliciclastic sedimentary basin: Examples from Upper Cretaceous shallow marine deposits of Utah and Coloradao,USA     

Kevin G. Taylor  Philip G. Machent 《Marine and Petroleum Geology》2010

Whilst the relationship between stratigraphic development and carbonate cementation within siliciclastic succession has been documented through a number case studies, these studies have been generally restricted to observations upon individual sequences and/or limited sub-surface data. In this paper, long-term (5 million years), large-scale (>200 km) stratigraphic controls on carbonate cementation patterns are documented from the Upper Cretaceous Panther Tongue Member, Blackhawk Formation and Castlegate Sandstone exposed in the Book Cliffs in Utah and Colorado, USA. Together, these comprise eight progradational wedges of sandstones, which interfinger with the Mancos Shale, deposited within the Western Interior Seaway foreland basin. Petrographic analyses of ferroan dolomite cement bodies within these sandstone wedges show that the ferroan dolomite cements are all early, relative to burial diagenesis within the host sandstones. Stable isotope analyses indicates that a significant meteoric component was present in precipitating fluids and this is consistent with the observation that cements, are always present down-dip of sequence boundaries and/or leached whitecaps beneath coals. In addition, the lateral distribution of cement bodies increases consistently up-succession from less than 5 km in extent in the older sequences, to 30 km in extent in the youngest sequences. These changes in distribution are in response to the increased progradation and increased and more aerially extensive sequence-boundary development in younger sequences. The implications of these data are that whilst localized spatial patterns of diagenesis, and in particular carbonate cementation, are predictable and controlled by the nature and presence of individual stratal surfaces, systematic diagenetic alteration patterns are also present at the sedimentary basin scale and controlled by the nature of larger-scale stratigraphic development and basin evolution. This evolution may be driven by eustatic shifts, or through tectonic or climatic driven base-level shifts. These observations allow an improved insight into the basin-scale processes that control the macroscopic diagenetic properties of sedimentary successions and sub-surface hydrocarbon reservoirs.  相似文献   

Diagenetic controls on evolution of porosity and permeability in lower Tertiary Wilcox sandstones from shallow to ultradeep (200–6700 m) burial,Gulf of Mexico Basin,U.S.A.     

Shirley P. Dutton  Robert G. Loucks 《Marine and Petroleum Geology》2010

Reservoir quality is a critical risk factor in deep to ultradeep reservoirs at depths >4.5 km. Analysis of Paleogene Wilcox sandstones on the upper Texas Gulf Coast provides insight into the evolution of reservoir quality during shallow to ultradeep burial diagenesis. Reduction of porosity and permeability with burial in Wilcox sandstones was evaluated using subsurface samples from 200 to 6700 m, at temperatures of 25–230 °C. Diagenesis and petrophysical properties were interpreted from petrographic data and core analyses. Wilcox sandstones are mostly lithic arkoses and feldspathic litharenites having an average composition of Q₅₉F₂₂R₁₉. Provenance did not change significantly during Wilcox deposition in this area, nor does average sandstone composition vary among lower, middle, and upper Wilcox sandstones. However, composition does vary with sequence-stratigraphic position; lowstand slope-fan deposits contain more rock fragments than do deposits from highstand or transgressive systems tracts. Given observations from this onshore dataset, Wilcox sandstones deposited in deepwater environments in the Gulf of Mexico are likely to contain more rock fragments than their linked highstand equivalents.  相似文献