Wind velocity and sand transport on a barchan dune   总被引：2，自引：0，他引：2  

G. Sauermann  J. S. Andrade  Jr.  L. P. Maia  U. M. S. Costa  A. D. Araújo  H. J. Herrmann 《Geomorphology》2003,54(3-4):245-255

We present measurements of wind velocity and sand flux performed on the windward side of a large barchan dune in Jericoacoara, northeastern Brazil. From the measured profile, we calculate the air shear stress using an analytical approximation and treat the problem of flow separation by an heuristic model. We find that the results from this approach agree well with our field data. Moreover, using the calculated shear velocity, we predict the sand flux according to well-known equilibrium relations and with a phenomenological continuum saltation model that includes saturation transients and thus allows for nonequilibrium conditions. Based on the field data and theoretical predicted results, we indicate the principal differences between saturated and nonsaturated sand flux models. Finally, we show that the measured dune moves with invariant shape and predict its velocity from our data and calculations.  相似文献   

Drainage, sediment transport, and denudation rates on the Nanga Parbat Himalaya, Pakistan     

Kevin Cornwell  Doug Norsby  Richard Marston 《Geomorphology》2003,55(1-4):25

The Nanga Parbat Himalaya presents some of the greatest relief on Earth, yet sediment production and denudation rates have only been sporadically addressed. We utilized field measurements and computer models to estimate bank full discharge, sediment transport, and denudation rates for the Raikot and Buldar drainage basins (north slope of Nanga Parbat) and the upper reach of the Rupal drainage basin (south slope).The overall tasks of determining stream flow conditions in such a dynamic geomorphic setting is challenging. No gage data exist for these drainage basins, and the overall character of the drainage basins (high relief, steep flow gradients, and turbulent flow conditions) does not lend itself to either ready access or complete profiling.Cross-sectional profiles were surveyed through selected reaches of these drainage basins. These data were then incorporated into software (WinXSPRO) that aids in the characterization (stage, discharge, velocity, and shear stress) of high altitude, steep mountain stream conditions.Complete field measurements of channel depths were rarely possible (except at several bridges where the middle of the channel could actually be straddled and probed) and, when coupled with velocity measurements, provided discrete points of field-measured discharge calculations. These points were then used to calibrate WinXSPRO results for the same reach and provided a confidence level for computer-generated results.Flow calculations suggest that under near bank full conditions, the upper Raikot drainage basin produces discharges of 61 cm and moves about 11,000 tons day⁻¹ (9980 tons day⁻¹) of sediment through its channel. Bank full conditions on the upper portion of the Rupal drainage basin generate discharges of 84 cm and moves only about 3800 tons day⁻¹ (3450 tons day⁻¹) of sediment. Although the upper Rupal drainage basin moves more water, the lower slope of the drainage basin (0.03) generates a much smaller shear stress (461 Pa) than does the higher slope (0.12) of the upper Raikot drainage basin (1925 Pa).Dissolved and suspended sediment loads were measured from water/sediment samples collected throughout the day and night over a period of 10 days at the height of the summer melt season but proved to be a minor variable in transport flux. Channel bed loads were measured using a pebble count method of bank material and then used to generate ratings curves of bed loads relative to discharge volumes. When coupled with discharge data and basin area, mean annual sediment yield and denudation rates for Nanga Parbat are produced. Denudation rates calculated in this fashion range from 0.2 mm year⁻¹ in the slower, more sluggish Rupal drainage basin to almost 6 mm year⁻¹ in the steeper, faster flowing Raikot and Buldar drainage basins.  相似文献   

地中蒸渗计水分运移机理及其监测误差分析   总被引：1，自引：0，他引：1  

李金柱  杨晓俊  杜琦 《水文》2003,23(5):10-12,37

对地中蒸渗计与自然潜水水分运移机理存在的差异及误差进行了分析。结果表明：地中蒸渗计与自然潜水在水位动态、水分存储、水分运移等方面存在一定的差异，使得利用地中蒸渗计监测的潜水蒸发量、降雨入渗补给量与自然潜水的实际情况产生了一定的误差，这种误差随着潜水埋深的变化而变化，潜水埋深越浅，误差越大，潜水埋深越深，误差越小。特别对于潜水埋深小于1．5m的地中蒸渗计，使用其资料时一定要作适当的技术处理，如果直接引用，将会给计算成果带来较大的误差。  相似文献   

THE SEDIMENTATION AND DREDGING OF GUANTING RESERVOIR     

Xiaoqing YANG  Shanzheng LI  Shiqi ZHANG 《国际泥沙研究》2003,18(2)

1 INTRODUCTION Guanting Reservoir is located on the Yongding River (a large tributary of the Haihe River) and at the border of Beijing Municipality and Hebei Province. The reservoir receives three tributaries: the Sanggan River with a drainage area of 25,840 km2, the Yanghe River with 16,170 km2, and the Guishui River with 852 km2. The drainage area above the reservoir is 43,402 km2. The reservoir has two arms. The Sanggan River and Yanghe River join the Yongding River at the ups…  相似文献   

A STUDY ON THE FLOOD STORAGE CAPACITY IN DONGTING LAKE     

Yitian LI  Jinyun DENG  Zhaohua SUN 《国际泥沙研究》2003,18(2)

1 INTRODUCTION Dongting Lake lies south of the middle reach of the Yangtze River in Hunan and Hubei provinces (Fig. 1). On the north side of Dongting Lake, there are the three diversion openings of the Yangtze River named Songzi, Taiping, and Ouchi, and, on the south and west sides, there are the four tributary streams named Xiang, Zi, Yuan, and Li Rivers. The flow of the three diversion openings and the four tributary streams runs into Dongting Lake, and runs out at Chenglingji a…  相似文献   

VORTEX FLOW FIELD IN A SCOUR HOLE AROUND ABUTMENTS     

Abdul Karim BARBHUIYA  Subhasish DEY 《国际泥沙研究》2003,18(4)

The three-dimensional flow field in a scour hole around different abutments under a clear water regime was experimentally measured in a laboratory flume, using the Acoustic Doppler Velocimeter (ADV). Three types of abutments used in the experiments were vertical-wall (rectangular section), 45° wing-wall (45° polygonal section) and semicircular. The three-dimensional time-averaged velocity components were detected at different vertical planes for vertical-wall abutment and azimuthal planes for wing-wall and semicircular abutments. The velocity components were also measured at different horizontal planes. In the upstream, presentations of flow field through vector plots at vertical / azimuthal and horizontal planes show the existence of a primary vortex associated with the downflow inside the scour hole. On the other hand, in the downstream, the flow field shows a reversed flow near the abutments having a subsequent recovery with a passage of flow as a part of the main flow. The data presented in this p  相似文献   

Parameters affecting maximum fluid transport in large aperture fractures   总被引：1，自引：0，他引：1  

Maria Ines Dragila  Noam Weisbrod   《Advances in water resources》2003,26(12):1219-1228

We present results of laboratory experiments to study the behavior of liquids moving in unsaturated wide-aperture fractures. A 5-mm-thick glass plate cut with a 1.7-mm aperture was used as a fractured rock analog to study behavior of film and capillary droplet flow modes. Flow rates ranged between 0.6 and 6.0 ml/min. Variability in the ambient barometric pressure, resulting from weather conditions, seemed to play a role in the natural selection of flow mode. For droplet mode, constant input conditions resulted in highly variable transport properties within the fracture. The advancing meniscus exhibited a dynamic contact angle that was a function of the droplet speed and much larger than the static contact angle. Flow rate was reduced due to the larger contact angle. Analytical expressions for droplet velocity and flow capacity are presented as a function of the dynamic rather than the static contact angle.  相似文献   

Coupled inverse modelling of groundwater flow and mass transport and the worth of concentration data   总被引：1，自引：0，他引：1  

Harrie-Jan Hendricks Franssen  Jaime Gómez-Hernández  Andrés Sahuquillo 《Journal of Hydrology》2003,281(4):281-295

This paper presents the extension of the self-calibrating method to the coupled inverse modelling of groundwater flow and mass transport. The method generates equally likely solutions to the inverse problem that display the variability as observed in the field and are not affected by a linearisation of the state equations. Conditioning to the state variables is measured by an objective function including, among others, the mismatch between the simulated and measured concentrations. Conditioning is achieved by minimising the objective function by gradient-based methods. The gradient contains the partial derivatives of the objective function with respect to: log conductivities, log storativities, prescribed heads at boundaries, retardation coefficients and mass sources. The derivatives of the objective function with respect to log conductivity are the most cumbersome and need the most CPU-time to be evaluated. For this reason, to compute this derivative only advective transport is considered. The gradient is calculated by the adjoint-state method. The method is demonstrated in a controlled, synthetic study, in which the worth of concentration data is analysed. It is shown that concentration data are essential to improve transport predictions and also help to improve aquifer characterisation and flow predictions, especially in the upstream part of the aquifer, even in the case that a considerable amount of other experimental data like conductivities and heads are available. Besides, conditioning to concentration data reduces the ensemble variances of estimated transmissivity, hydraulic head and concentration.  相似文献   

Neuzeitlicher Schadstofftrend: Polycylische aromatische Kohlenwasserstoffe (PAK) in aquatischen und terrestrischen Sedimenten     

Hubert Hellmann 《洁净——土壤、空气、水》2003,31(2):85-96

A Recent Contamination Trend: Polycylic Aromatic Hydrocarbons (PAHs) in Aquatic and Terrestrial Sediments Concentrations of polycylic aromatic hydrocarbons (PAHs) measured in aquatic sediments of small, medium‐sized or very large inland lakes, of estuaries as well as in terrestrial sediments from Germany, the UK, Finland, and the USA were plotted in 10 trend curves over the period from 1800 to 1990. The segments of the bore cores were dated for their deposition age. For comparability of the results, the trend is preferentially shown by the guide parameter fluoranthene. Until the 19th century, a constant background value of C_Fluo = 10…50 μg/kg was observed in all regions. Then a steep increase in concentration followed, reaching in the aquatic sediments a maximum in the period 1940 to 1965, while the individual fluoranthene values ranged widely from 90 to 2400 μg/kg. In several regions, a more or less distinct decrease superseded this maximum, although this development did not appear in terrestrial sediments, in one estuary, and in remote forest lakes in Finland. The trend curves reflect the atmospheric deposition of PAHs in airborne dust and in some cases the import through runoff via rivers. Thus, the sediment profiles depict the development of air pollution by pyrogenic contaminants over more than a century. Sediment profiles from rivers can be used only with a high degree of reservation, because of the irregularity and low representativity of the sedimentation.  相似文献   

Recent ventifact development on the central Oregon coast,western USA     

Jasper Knight  Helene Burningham 《地球表面变化过程与地形》2003,28(1):87-98

The unusual location of ventifacts, on a boulder‐built jetty at the mouth of the Siuslaw River, Oregon coast, western USA, allows ventifact age and wind abrasion rates to be estimated with some precision. The jetty was built mainly between 1892–1901 and extended throughout the twentieth century. Consideration of historical shoreline position and the history of jetty construction and repair suggests the ventifacts have formed since about 1930. Morphologically the ventifacts are aligned south‐to‐north reflecting winter winds and sediment transport from the adjacent beach. Wind‐parallel grooves and ridges with sharp, sinuous crests are developed on inclined boulder surfaces on top of the jetty and reflect suspended sand transport in wind vortices. Deeply pitted surfaces on steep boulder surfaces nearest the beach reflect impact by saltating sand grains. Based on present wind regimes (1992–2000) from three regional weather stations, southerly winds above the sand transport threshold occur for 21·9–29·6 per cent of the time. Based on estimated depth of loss from boulder surfaces, wind abrasion rates are calculated to be on the order of 0·24–1·63 mm a^?1. This is the first well‐constrained field estimate of ventifact age and ventifaction rate from a modern coastal environment. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献