三次样条插值在浮性频率计算中的应用     

蔡树群  甘子钧  仇德忠 《热带海洋学报》1997,(3)

在普遍利用海洋观测站标准层的温度、盐度数据估算稳定层化海水浮性频率的传统算法中引入自然三次样条插植方法，不仅可使计算结果的精度得以提高，而且还可方便地对观测深度范围内的任一水层进行插值，从而获得总体曲率最小的温度、盐度和浮性频率随深度的分布。本文以南海（13°30’N，118°30’E；9°30’N，lll°30’E）及北太平洋（40°00’N130°00’W）3个测站为例，说明了在浮性频率的传统算法中引入自然三次样条插值法的可行性。  相似文献   

Baroclinic Buoyancy-Inertia Joint Stability Parameter     

Hideo Kawai 《Journal of Oceanography》2005,61(2):235-246

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.  相似文献   

Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar)     

Yosuke Fujii 《Journal of Oceanography》2005,61(1):167-181

I present the derivation of the Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar), which is developed for adopting a non-diagonal background error covariance matrix in nonlinear variational analyses (i.e., analyses employing a non-quadratic cost function). POpULar is based on the idea of a linear preconditioned conjugate gradient method widely adopted in ocean data assimilation systems. POpULar uses the background error covariance matrix as a preconditioner without any decomposition of the matrix. This preconditioning accelerates the convergence. Moreover, the inverse of the matrix is not required. POpULar therefore allows us easily to handle the correlations among deviations of control variables (i.e., the variables which will be analyzed) from their background in nonlinear problems. In order to demonstrate the usefulness of POpULar, we illustrate two effects which are often neglected in studies of ocean data assimilation before. One is the effect of correlations among the deviations of control variables in an adjoint analysis. The other is the nonlinear effect of sea surface dynamic height calculation required when sea surface height observation is employed in a three-dimensional ocean analysis. As the results, these effects are not so small to neglect.  相似文献   

Response-based method for determining the extreme behaviour of floating offshore platforms     

Said Mazaheri  Martine J. Downie 《Ocean Engineering》2005,32(3-4):363-393

The accurate prediction of extreme excursion and mooring force of floating offshore structures due to multi-variete environmental conditions which requires the joint probability analysis of environmental conditions for the worst case situation is still impractical as the processing of large amount of met-ocean data is required. On the other hand, the simplified multiple design criteria (e.g. the N-year wave with associated winds and currents) recommended by API known as traditional method does lead neither to the N-year platform response nor to the N-year mooring force. Therefore, in order to reduce the level of conservatism as well as uncertainties involved in the traditional method the response-based method can be used as a reliable alternative approach. In this paper this method is described. In order to perform the calculations faster using large databases of sea states, Artificial Neural Networks (ANN) is designed and employed. In the paper the response-based method is applied to a 200,000 tdw FPSO and the results are discussed.  相似文献   

Experimental Investigation into the performance of the Axial-Flow-Type Waterjet according to the Variation of Impeller Tip Clearance   总被引：1，自引：0，他引：1  

Moon-Chan Kim  Ho-Hwan Chun 《Ocean Engineering》2007,34(2):275-283

The tip clearance inside the duct from the tip of the impeller is very important to the performance of waterjet systems, which fact has been proven in the pump field. The tip clearance is especially important on the model scale because it is very difficult in manufacture to keep the tip clearance constant and minimally small along the inside of the duct. In the present study, a flush-type waterjet propulsion unit (duct, impeller, stator, and nozzle) was designed for an amphibious tracked vehicle. Two impellers of different inner diameter were designed and manufactured in order to investigate the gap effect. Resistance and self-propulsion tests with a 1/5-scale model were conducted in PNU towing tank. The flow rate at the nozzle exit, the static pressure at the various sections along the duct and also the nozzle, the revolution of the impeller, and the torque, thrust, and towing forces at various advanced speeds were measured. Based on these measurements, the performance was analyzed according to the ITTC 96 standard analysis method. Based on this analysis method, the full-scale effective and delivered power of the tracked vehicle was estimated according to the variation of tip clearance.  相似文献   

Use of an optical oxygen sensor to measure dissolved oxygen in seawater     

Hiroshi Hasumoto  Tsuneo Imazu  Toshiaki Miura  Kazuhiro Kogure 《Journal of Oceanography》2006,62(1):99-103

The use of an optical oxygen sensor to measure dissolved oxygen in seawater was investigated. The sensor is based on the dynamic quenching of an oxygen-sensitive fluorochrome embedded in the tip. Dissolved oxygen in seawater samples collected from eight stations at depths ranging from 3000 to 6000 m was analyzed both with the optical sensor and by the Winkler titration method. The two sets of data did not differ significantly. The stability and simplicity of the method and the good agreement of the results with those of the titration method indicate that the sensor would be useful for fieldwork.  相似文献   

陀螺经纬仪的读数方法比较研究   总被引：2，自引：0，他引：2  

万朋  李宗春  李广云  张冠宇  牟爱国 《海洋测绘》2005,25(5):75-78

介绍了陀螺定向测量中三种不同的数据采集方法，分析了各种方法的优缺点。作者认为传感器采集数据自动化程度高，精度高，特别是运用位置敏感探测器（PSD）采样数据量大，具有一定的抗干扰能力，但在运用传感器采样时必须注意克服非线性误差。  相似文献   

海泥环境中阴极保护的边界元计算     

王秀通  侯保荣  李焰 《海洋科学》2006,30(12):62-64

根据阴极保护的特点,建立了用于数值计算的模型;采用边界元方法对海泥介质中的阴极保护系统进行了计算,获得了海泥中钢管表面以及海泥介质内部的电位分布。将计算的结果与测量的数据进行比较,两者具有较好的一致性。  相似文献   

The target strength of Antarctic krill (Euphausia superba) measured by the split-beam method in a small tank at 70 kHz     

Amakasu  Kazuo; Furusawa  Masahiko 《ICES Journal of Marine Science》2006,63(1):36-45

  相似文献   

桩-网路堤位移应力分析及其应用     

潘学政  吴明  陈汉良 《海洋学研究》2007,25(2):57-62

由于桩-网复合地基的结构形式比较复杂,难以采用解析法求得其应力和位移。利用有限差分法对某桩-网法路堤进行了数值模拟,并取得了较好结果。计算结果显示,桩间土沉降线为悬链线,与现场位移监测结果吻合较好;桩身弯矩和桩土应力反映了桩-网复合地基的一些受力机理。分析认为,桩间土沉降较大的主要原因是由土体本身压缩及桩侧弯引起的。  相似文献