Design of ship's bow form by potential-based panel method     

Jaehoon Yoo   《Ocean Engineering》2007,34(8-9):1089-1095

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.  相似文献   

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover     

Xuefeng Chen  Yucheng Li  Bin Teng 《Coastal Engineering》2007

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.  相似文献   

Measurements of higher harmonic wave forces on a vertical truncated circular cylinder     

S.Y. Boo   《Ocean Engineering》2006,33(2):219-233

Wave forces on a vertical truncated circular cylinder in Stokes waves with the wave slopes ranging from 0.06 to 0.24, are measured in a wave tank. The higher harmonic wave forces are compared with the available values from theories of the FNV (Faltisen–Newman–Vinje) model and Varyani solution. The first harmonic horizontal forces measured are much larger than the theoretical values from the FNV model, while the first harmonic vertical forces are well predicted by the Varyani theory. It was also found that the FNV model significantly overpredicts the second harmonic horizontal forces in high frequency waves, but under predicts the third harmonic forces. The differences between the actual measurement and the theory, in the second and third harmonic horizontal forces, become smaller at low wave frequencies as the wave slope increases. In addition, the transverse instabilities in the incoming waves with high wave slope were observed, which is due to the nonlinear modulation. Measurements were, thus, carried out before the instability occurred.  相似文献   

大陆岩石圈在张裂和分离时的变形模式   总被引：4，自引：0，他引：4  

姚伯初 《海洋地质与第四纪地质》2002,22(3):59-67

通过对南海南北共轭边缘地壳剖面的对比研究,发现大陆岩石圈的物理性质是分层的：上、中地壳呈脆性,下地壳表现出塑性,而岩石圈上地幔则仍呈脆性。因此,在它受张性应力场作用时,其变形和破裂分离方式也是分层进行的：上、中地壳能发生犁式断裂,产生的断块沿断面转动在地表产生一系列半地堑,并使地壳厚度减薄;如拉张应力继续作用时,上、中地壳将沿犁式断裂被拉开,从而形成上、下板块边缘,并彼此分开。下地壳则发生塑性变形,使地壳厚度减薄,并最终将其拉断。岩石圈上地幔亦可产生陡倾断裂,形成的断块沿断面转动亦使其厚度减薄,并最终沿陡倾断裂被拉断。这就是我们称之为岩石圈变形和破裂分 离时的分层变形及分层破裂分离模式。  相似文献   

有风浪太湖水体的光照传输模式   总被引：8，自引：0，他引：8       下载免费PDF全文

蔡启铭  杨平 《海洋与湖沼》1993,24(3):286-293

根据辐射传输方程的近似解方法和光照传输的累加原理,建立了包括水面风浪效应、水中悬浮粒多次散射和底泥反射的垂直分层水体的光照传输数值模式。利用该模式和太湖悬浮粒实测资料,计算和讨论了太湖水体中光照随水深的变化以及悬浮粒浓度、风浪和太阳高度的影响。结果表明,悬浮粒的多次散射所形成的漫射光是湖水中光照不可忽视的重要部分。在水体的下层,漫射光甚至是光照的主要构成部分。风浪对水中光照的影响则主要在天顶角大于70°时才明显地表现出来,此时风浪水体对太阳直接辐射和全辐射的反射率比平静水面都有明显的减小。  相似文献   

南海波高熵和风速熵   总被引：4，自引：0，他引：4  

郭佩芳  施平  孙孚  戚建华 《海洋与湖沼》1997,28(2):185-191

根据风速的统计分布，给出了有因次风速熵和无因次风速熵的定义及其计算方法，使用ＧＥＯＳＡＴ高度计１９８６年１１月－１９８９年２月的有效波高和风速的资料，计算，分析了南海海域上的波高熵，风速熵，给出它们的时间变化特征和空间变化特征，并对不同随机量的无因次熵，即随机度进行了比较。  相似文献   

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact   总被引：1，自引：0，他引：1  

Wang Deyu  Zhang Shanyuan Associate Prof.  Depart  of Naval Archi.  Ocean Engineering  Shanghai Jiaotong University  Shanghai Prof.  Research Institute of Applied Mechanics  Taiyuan University of Technology  Taiyuan 《中国海洋工程》1996,(2)

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.  相似文献   

南海罗斯贝变形半径的地理及季节变化   总被引：3，自引：1，他引：3  

甘子钧  蔡树群 《热带海洋学报》2001,20(1):1-9

根据南海 1°× 1°网格的标准层季节平均温、盐度资料 ,在未引入Boussinesq近似条件下 ,采用改进的Thompson Haskell算法求解线性化斜压海洋水平大尺度波的垂直结构方程 (重力内波方程 ) ,从而得到了南海各网格点的第一斜压重力波相速度和相应的罗斯贝变形半径 ,并探讨其地理分布和季节变化特征 ,以期有助于南海环流和中尺度涡旋以及有关海洋侧边界效应的研究。  相似文献   

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification     

Woojae Seong  Cheolsoo Park 《Marine Georesources & Geotechnology》2001,19(1):37-50

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.  相似文献   

Triple diagram method for the prediction of wave height and period   总被引：1，自引：0，他引：1  

Mehmet zger  Zekai en 《Ocean Engineering》2007,34(7):1060-1068

Many formulations have been developed so far to predict the wave height and period from fetch length and wind blowing duration for a constant wind speed. This study aimed to predict wave parameters from fetch length and meteorological factors by using triple diagram methodology based on Kriging principles. Proposed model results were compared with Joint North Sea Wave Project (JONSWAP) model which is used so commonly in the ocean and coastal engineering studies. For the implementation of the methodology hourly wave and wind data were obtained from a buoy located in Lake Ontario. Numerical and graphical comparisons demonstrated that the proposed method outperforms the classical formulation.  相似文献