基于IRCGA优化的GM(1,1)变形预测方法与应用研究     

喻巧  张献州  陈超  刘龙 《测绘与空间地理信息》2013,(12):42-45

阐述了引入时间距离权的传统GM(1,1)模型的建模过程以及灰色模型等级的判断方法,深入分析了白化背景参数λ取值对建模精度的影响;同时针对传统λ取值的缺陷,提出使用基于实数编码的改进遗传算法(IRCGA)对其进行优化处理,并用多个工程实例分析验证了优化后的GM(1,1)模型相对传统的灰色模型及其优化模型拟合效果更好,更加贴近真实数据序列。  相似文献   

Toward seamless indoor-outdoor applications: Developing stakeholder-oriented location-based services     

Kohei OGAWA  Edward VERBREE  Sisi ZLATANOVA  Naohiko KOHTAKE  Yoshiaki OHKAMI 《地球空间信息科学学报》2011,14(2):109-118

Location-Based Services (LBS),an emerging new business based on smartphone and mobile networks,are becoming more and more popular.Most of these LBSs,however,only offer non-seamless indoor/outdoor applications and simple applications without giving stakeholders the chance to play an active role.Our specific aim is to solve these issues.This paper presents concepts to solve these issues by expanding the Open Location Services Interface Standard (OpenLS) to allow seamless indoor/outdoor positioning and to extend the content of the services to include information recommended by stakeholders.  相似文献   

Atmospheric Concentrations and Phase Partitioning of Polycyclic Aromatic Hydrocarbons in Izmir,Turkey   总被引：1，自引：0，他引：1  

Eylem Demircioglu  Aysun Sofuoglu  Mustafa Odabasi 《洁净——土壤、空气、水》2011,39(4):319-327

Ambient air polycyclic aromatic hydrocarbon (PAH) samples were collected at a suburban (n = 63) and at an urban site (n = 14) in Izmir, Turkey. Average gas‐phase total PAH (∑₁₄PAH) concentrations were 23.5 ng m^?3 for suburban and 109.7 ng m^?3 for urban sites while average particle‐phase total PAH concentrations were 12.3 and 34.5 ng m^?3 for suburban and urban sites, respectively. Higher ambient PAH concentrations were measured in the gas‐phase and ∑₁₄PAH concentrations were dominated by lower molecular weight PAHs. Multiple linear regression analysis indicated that the meteorological parameters were effective on ambient PAH concentrations. Emission sources of particle‐phase PAHs were investigated using a diagnostic plot of fluorene (FLN)/(fluorine + pyrene; PY) versus indeno[1,2,3‐cd]PY/(indeno[1,2,3‐cd]PY + benzo[g,h,i]perylene) and several diagnostic ratios. These approaches have indicated that traffic emissions (petroleum combustion) were the dominant PAH sources at both sites for summer and winter seasons. Experimental gas–particle partition coefficients (K_P) were compared to the predictions of octanol–air (K_OA) and soot–air (K_SA) partition coefficient models. The correlations between experimental and modeled K_P values were significant (r² = 0.79 and 0.94 for suburban and urban sites, respectively, p < 0.01). Octanol‐based absorptive partitioning model predicted lower partition coefficients especially for relatively volatile PAHs. However, overall there was a relatively good agreement between the measured K_P and soot‐based model predictions.  相似文献   

GIS气象数据的管理与表达方法     

何永健  曹芸  黄勇 《南京气象学院学报》2011,(3):232-237

将气象数据分为离散数据、格网数据和要素数据,在此基础上,建立了气象数据库,包括气象资料信息数据库、社会资料信息库、基础地理数据库和气象空间数据库,并详细分析了气象数据的组织结构、表达和处理方法,最后提出了基于GIS的气象数据管理与表达的处理方法.  相似文献   

北衙金矿综合信息成矿预测   总被引：3，自引：0，他引：3  

陈爱兵 《地质与勘探》2011,47(4):633-641

随着找矿难度的日益加大,如何运用高新技术对海量的地、物、化、遥地学多源信息进行“二次开发”和“综合应用”,提高找矿成功率,降低成本,已成为地质勘查领域亟待解决的问题。本文通过对北衙金矿的研究,在广泛收集、研究前人工作成果的基础上,厘定了北衙金矿综合信息找矿模型。以GIS为平台,对矿区积累的地、物、化多源信息进行了空间分...  相似文献   

基于剖面三维地质建模方法及在本溪地区应用   总被引：1，自引：0，他引：1  

张伟  薛林福  彭冲  柴源  成伟 《地质与资源》2013,22(5):403-408

针对成矿带三维地质建模面临的实际问题,以GOCAD软件作为三维建模工具,阐述了基于剖面的三维地质建模流程与方法.为了充分揭示本溪地区深部地质情况及隐伏铁矿的发育情况,采用基于剖面的三维地质建模方法构建了本溪地区907km2的三维地质模型,获取了本溪地区地下三维地质结构,显示出该地区盖层发育宽缓褶皱,断裂切割作用强烈,基底最大埋深可达4200 m,在变质基底埋深较浅的地区,具有很大的铁矿资源勘探潜力.实际应用情况表明,基于剖面的三维地质建模方法符合地质研究从二维到三维的工作流程和思维习惯,是一种有效的成矿带三维建模方法.  相似文献   

Developing an algorithm for reconstruction of blocky systems in discontinuous media: two-dimensional analysis     

《Geomechanics and Geoengineering》2013,8(3):171-183

Block detection is one of the most important steps in all discontinuous methods of analysis like Discontinuous Deformation Analysis (DDA) and Discrete Element Method (DEM). This is in fact a pre-processing step for those methods. In this study, a comprehensive computational algorithm, for tracing rock block created by discontinuities, has been developed. Using square matrices with integer elements and performing edge regularization step, reduce the size of the matrices due to elimination of unnecessary edges and vertices. Therefore speed and accuracy of block tracing operation will be increased. This algorithm is able to trace and identify all kind of blocks including convex and concave blocks formed by limited or unlimited fractures. The algorithm was programmed in C#.Net by over 3400 code lines and some cases were modeled by the code as example.  相似文献   

超道相干体技术在复杂断块断裂解释中的应用     

赵汝敏  柏冠军  李培培 《物探与化探》2013,(5):942-946

针对复杂断块的断裂地震特征,笔者利用超道构建技术,并与基于小波变换的相干技术集成,再进行相干计算。超道构建技术具有不改变地层的原有信息而保留了地层的倾角特征、降低属性分析的平均效应的优势,试算结果证明,该方法不仅计算速度快,而且抑制噪声能力强。通过与传统相干算法实际应用对比,该算法有效地突出了地层的高连续性特征,提高了识别断层的分辨率,地质特征信息丰富,有利于断层解释,尤其适用于低信噪比地震资料地区。  相似文献   

面向位置服务的室内外统一空间基准转换     

孙卫新  李鹤元  郑团结 《测绘工程》2022,31(1):35-39,51

随着智慧城市建设的不断推进,对位置服务的需求已经由室外拓展至室内空间,并对室内外一体化服务提出更高要求.由于室内空间范围相对较小且对几何信息表达精度要求较高,因此,通常采用独立的平面或三维直角坐标系作为空间基准,从而造成室内与室外以及不同建筑室内空间基准的差异,影响室内外空间信息的一体化表达与应用.为此,文中在系统分析...  相似文献   

Estimation of hysteretic energy demand using concepts of modal pushover analysis   总被引：1，自引：0，他引：1  

Tholen Prasanth  Siddhartha Ghosh  Kevin R. Collins 《地震工程与结构动力学》2008,37(6):975-990

Hysteretic energy dissipation in a structure during an earthquake is the key factor, besides maximum displacement, related to the amount of damage in it. This energy demand can be accurately computed only through a nonlinear time‐history analysis of the structure subjected to a specific earthquake ground acceleration. However, for multi‐story structures, which are usually modeled as multi‐degree of freedom (MDOF) systems, this analysis becomes computation intensive and time consuming and is not suitable for adopting in seismic design guidelines. An alternative method of estimating hysteretic energy demand on MDOF systems is presented here. The proposed method uses multiple ‘generalized’ or ‘equivalent’ single degree of freedom (ESDOF) systems to estimate hysteretic energy demand on an MDOF system within the context of a ‘modal pushover analysis’. This is a modified version of a previous procedure using a single ESDOF system. Efficiency of the proposed procedure is tested by comparing energy demands based on this method with results from nonlinear dynamic analyses of MDOF systems, as well as estimates based on the previous method, for several ground motion scenarios. Three steel moment frame structures, of 3‐, 9‐, and 20‐story configurations, are selected for this comparison. Bias statistics that show the effectiveness of the proposed method are presented. In addition to being less demanding on the computation time and complexity, the proposed method is also suitable for adopting in design guidelines, as it can use response spectra for hysteretic energy demand estimation. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献