The dynamics and thermodynamics of large ash flows   总被引：6，自引：6，他引：0  

Marcus I. Bursik  Andrew W. Woods 《Bulletin of Volcanology》1996,58(2-3):175-193

 Ash flow deposits, containing up to 1000 km³ of material, have been produced by some of the largest volcanic eruptions known. Ash flows propagate several tens of kilometres from their source vents, produce extensive blankets of ash and are able to surmount topographic barriers hundreds of metres high. We present and test a new model of the motion of such flows as they propagate over a near horizontal surface from a collapsing fountain above a volcanic vent. The model predicts that for a given eruption rate, either a slow (10–100 m/s) and deep (1000–3000 m) subcritical flow or a fast (100–200 m/s) and shallow (500–1000 m) supercritical flow may develop. Subcritical ash flows propagate with a nearly constant volume flux, whereas supercritical flows entrain air and become progressively more voluminous. The run-out distance of such ash flows is controlled largely by the mass of air mixed into the collapsing fountain, the degree of fragmentation and the associated rate of loss of material into an underlying concentrated depositional system, and the mass eruption rate. However, in supercritical flows, the continued entrainment of air exerts a further important control on the flow evolution. Model predictions show that the run-out distance decreases with the mass of air entrained into the flow. Also, the mass of ash which may ascend from the flow into a buoyant coignimbrite cloud increases as more air is entrained into the flow. As a result, supercritical ash flows typically have shorter runout distances and more ash is elutriated into the associated coignimbrite eruption columns. We also show that one-dimensional, channellized ash flows typically propagate further than their radially spreading counterparts. As a Plinian eruption proceeds, the erupted mass flux often increases, leading to column collapse and the formation of pumiceous ash flows. Near the critical conditions for eruption column collapse, the flows are shed from high fountains which entrain large quantities of air per unit mass. Our model suggests that this will lead to relatively short ash flows with much of the erupted material being elutriated into the coignimbrite column. However, if the mass flux subseqently increases, then less air per unit mass is entrained into the collapsing fountain, and progressively larger flows, which propagate further from the vent, will develop. Our model is consistent with observations of a number of pyroclastic flow deposits, including the 1912 eruption of Katmai and the 1991 eruption of Pinatubo. The model suggests that many extensive flow sheets were emplaced from eruptions with mass fluxes of 10⁹–10¹⁰ kg/s over periods of 10³–10⁵ s, and that some indicators of flow "mobility" may need to be reinterpreted. Furthermore, in accordance with observations, the model predicts that the coignimbrite eruption columns produced from such ash flows rose between 20 and 40 km. Received: 25 August 1995 / Accepted: 3 April 1996  相似文献   

论南岭成矿带大宝山斑岩型铜矿的特殊性及其勘查意义     

赵如意 《地质与勘探》2023,59(4):716-733

广东省大宝山矿床是南岭成矿带唯一的大型铜多金属矿床，此次研究在矿区中南部发现了细脉浸染状铜矿的新类型。为确定其是否为斑岩型铜矿的成因类型，本文在梳理南岭成矿带铜成矿条件和成矿规律的基础上，查明了矿区中南部英安斑岩的蚀变和铜矿化特征。综合研究认为南岭成矿带早侏罗世中酸性斑岩的小岩体较多，叠加多期断裂构造和碳酸盐岩建造，非常有利于铜多金属成矿物质的运移、富集。大宝山英安斑岩发育黑云母化、钾长石化、青磐岩化、绢英岩化、泥化等蚀变类型，铜矿化与绢英岩化、绿泥石化关系密切。大宝山铜矿中的英安斑岩沿逆冲推覆构造侵位并呈岩墙状产出，冷却过程中受区域构造应力产生了一组平行裂隙，岩浆房去气作用排出的热液沿裂隙蚀变围岩并充填成矿。大宝山斑岩型铜矿取得的找矿勘查成果表明，“全位成矿，缺位找矿”理念可以有效指导靶区圈定和老矿山外围（深部）找矿勘查，早侏罗世的南岭具有形成较大规模斑岩型铜矿的条件。  相似文献   

Interactive effects of the type of milling media and CuSO₄ addition on the flotation performance of sulphide minerals from Merensky ore Part II: Froth stability     

Z. Ekmekci  D.J. Bradshaw  P.J. Harris  A.M. Buswell 《International Journal of Mineral Processing》2006

The limitations of pulp chemistry measurements in the flotation of a platinum group mineral (PGM) bearing Merensky ore were demonstrated in Part 1 of this article. In this paper the importance of the contribution of the froth structure due to changing froth stability is analysed using the batch flotation data. The effects of mild steel (MS) and stainless steel (SS) milling media and the addition of copper sulphate on the flotation performance of the sulphide minerals in Merensky ore have been evaluated in relation to the changes in stability of the froth phase. The effects of pulp chemistry and froth stability on the flotation of sulphide minerals were distinguished by using two different rate constants (k_t and k_w). The rate constant (k_w) calculated as a function of cumulative water recovery was used to describe characteristics of froth phase and k_t was calculated as a function of flotation time. The results revealed that the type of grinding media and copper sulphate addition had an interactive effect on the froth stability. While mild steel (MS) milling increased the froth stability due to the presence of hydrophilic iron hydroxides and colloidal metallic iron, the addition of copper sulphate reduced the stability, especially with stainless steel (SS) milling. Copper sulphate addition had a dual role in the flotation of Merensky ore in that it caused destabilisation of the froth zone as well as activation of selected sulphide minerals. The dominant effect was found to depend on the type of milling media and floatability of the mineral in question and this work has demonstrated the importance of using a combination of measurements to evaluate flotation performance holistically.  相似文献   

Changes to cadmium associations in canal sediments on drying and oxidation     

Samantha R. Cook John M. Chamock Andrew Parker 《中国地球化学学报》2006,25(B08):247-247

The mainly 19th Century canal system in the UK, largely managed by British Waterways, has been increasingly brought back into operation over the last few decades, and is now widely used for both leisure, and, increasingly, transport. Both initial and routine dredging of the canal sediment is carried out and these sediments are generally disposed of to land. Because many of the canals were connected with primary industries, their sediments can locally be significantly contaminated with heavy metals, and the behaviour of these metals under differing redox conditions, when introduced into a new environment （i.e., on land） is of importance for environmental risk-assessment purposes. Canal sediments are often rich in sulfidic mineral phases, and we have attempted to quantify the influence of these sulfidic phases on the release and retention of metals in dredged canal sediments, using a combination of traditional chemical techniques （e.g. sequential extraction） and X-ray absorption spectroscopy （XAS）. Sediment samples have been collected from urban fresh-water canals, one in the British Midlands and one in Northern France. It appears from XAS that Cd is largely associated with oxygen in air-dried sediment, and with sulphur in vacuum-dried sediment.  相似文献   

Retrieval of stratospheric O3 and NO2 vertical profiles using zenith scattered light observations     

G. S. Meena  C. S. Bhosale  D. B. Jadhav 《Journal of Earth System Science》2006,115(3):333-347

Daily zenith scattered light intensity observations were carried out in the morning twilight hours using home-made UV-visible spectrometer over the tropical station Pune (18‡31′, 73‡51′) for the years 2000–2003. These observations are obtained in the spectral range 462–498 nm for the solar zenith angles (SZAs) varying from 87‡ to 91.5‡. An algorithm has been developed to retrieve vertical profiles of ozone (O₃) and nitrogen dioxide (NO₂) from ground-based measurements using the Chahine iteration method. This retrieval method has been checked using measured and recalculated slant column densities (SCDs) and they are found to be well matching. O₃ and NO₂ vertical profiles have been retrieved using a set of their air mass factors (AMFs) and SCDs measured over a range of 87–91.5‡ SZA during the morning. The vertical profiles obtained by this method are compared with Umkehr profiles and ozonesondes and they are found to be in good agreement. The bulk of the column density is found near layer 20–25 km. Daily total column densities (TCDs) of O₃ and NO₂ along with their stratospheric and tropospheric counterparts are derived using their vertical profiles for the period 2000–2003. The total column, stratospheric column and tropospheric column amounts of both trace gases are found to be maximum in summer and minimum in the winter season. Increasing trend is found in column density of NO₂ in stratospheric, tropospheric and surface layers, but no trend is observed in O₃ columns for above layers during the period 2000–2003  相似文献   

新疆巴喀勒萨依地区含铜砂岩及其铜矿床特征     

凌联海  楼法生  刘春根  肖晓林  程春华  于成涛 《华东地质学院学报》2006,29(2):115-120

近年来在新疆巴喀勒萨依地区发现一套含少量火山碎屑岩的含铜砂岩地层,由于该地层位于近东西向的断裂夹块中,其含矿层位的确定就成了难题。在该地层中发现了一些腕足类、珊瑚、腹足类、植物化石,经中国科学院南京地质古生物研究所鉴定,时代属晚石炭世晚期。介绍了巴喀勒萨依地区晚石炭世伊什基里克组含铜砂岩剖面及铜矿特征,并获得铜资源量19 797 t,银铜资源量371 t,提出了该区铜、银富集在红色含铜砂岩中有机质聚集处的新观点。  相似文献   

Zircon LA-ICP-MS U-Pb age, Ce^4＋/Ce^3＋ ratios and the geochemical features of the Machangqing complex associated with copper deposit     

梁华英  喻亨祥  莫测辉  张玉泉  谢应雯 《中国地球化学学报》2006,25(3):223-229

1IntroductionQuite a number of porphyry copper deposits havebeen found in the Cenozoic alkali-intrusions along theJinshajiang-Ailaoshan-Red River fault zone,whichconstitute the Cenozoic ore belt in China.The Cenozo-ic alkali-intrusive rocks are similar in…  相似文献   

陕西穆家庄铜矿床后生成矿作用的流体地球化学证据   总被引：2，自引：2，他引：2  

朱华平  李虹  张德全  刘平 《西北地质》2005,38(2):54-61

尽管秦岭泥盆系铅锌金多金属成矿带成矿作用均与热水喷流沉积作用有关，柞山地区却有别于风太地区，具有独特的铜矿成矿背景。流体包裹体研究揭示了后生成矿流体的两阶段流体演化过程：第一阶段的成矿流体为中温，中高盐度岩浆热液含CO2的NaCl—H2O流体。均一温度为190-265℃，盐度12．5～35．34(w1％NaCl)，压力12．8～21．3MPa，在同地寄主矿物中均一温度变化小，而盐度变化极大，是岩浆流体沸腾的产物；第二阶段成矿流体为中高温，中高盐度岩浆期后热液NaCl-H2O流体。均一温度为300～350℃，盐度7．4～41．59(w1％NaCl)，压力10．8～19．3MPa。反映了岩浆期后热液流体的二次沸腾。应用流体地球化学的综合方法(包裹体流体组成、演化)识别出后生交代流体性质。穆家庄铜矿的成矿流体第一阶段为岩浆水，第二阶段的成矿流体为岩浆水加部分地层水(建造水)。氢氧同位素分析也支持上述结论。  相似文献   

岩石、土壤样品中210Po测定方法的研究   总被引：1，自引：0，他引：1  

王玉学 《铀矿地质》2005,21(4):248-256

研究了以铜箔为镀片时,自沉积总α计数法定量测定岩石、土壤样品中210Po的最佳制源环境、同位素的干扰和去除、共存元素的允许量以及适宜的溶(熔)矿方法,同时研究了银、铜两种镀片的区别。试验发现,当盐酸浓度为2.0mol/L,恒温80℃,振荡频率为180次/min、振程20mm时,制源2.0h,210Po自镀回收率在99.6%～100.4%之间,210Po加入量与α净计数率线性相关系数为0.9999。放置衰变法可以消除212Bi和218Po等短半衰期核素对210Po测量产生的影响,Vc存在时其它共存元素不干扰测定。方法配合HNO3HFHClO4溶矿(对复杂试样酸溶后的不溶渣,再进行碱熔),全程回收率为99.5%～100.4%。  相似文献   

镉的地球化学研究现状及展望   总被引：13，自引：0，他引：13  

叶霖潘自平  李朝阳刘铁庚 夏斌 《岩石矿物学杂志》2005,24(4):339-348

镉是重金属有毒元素,其环境污染一直是众多学者研究的焦点。近年来研究发现,镉等分散元素并不“分散”,它在特定的条件下会富集,甚至形成独立矿床或矿体,因此有必要对镉等分散元素的地球化学行为进行重新认识和再研究。本文介绍了有关镉的分布和赋存状态的一些研究进展,总结了我国镉矿资源的分布及特点和地球化学研究现状,提出应加强镉的超常富集机制、铅锌矿床表生地球化学过程中镉的释放及其对环境的影响方面的研究。  相似文献