山区公路软基病害研究   总被引：2，自引：0，他引：2  

刘雪岭  苏生瑞  周新民 《地球科学与环境学报》2005,27(1):65-69

随着高等级公路建设规模的扩大，山区公路所面临的路基病害特别是软土路基病害问题也逐渐增多。结合对陕南勉(县)一宁(强)高速公路工程实例分析，对山区软土成因及其特性进行了初步分析，认为山区软土属以坡洪积、湖积和冲积为主的软土，也有少量是由坡残积物堆积而形成。山区软土的特殊性表现在成分的复杂性、分布的不均匀性、隐蔽性和物理力学性质的特殊性。根据其特性以及中国山区公路软基普遍存在的病害问题，总结了山区公路软基的主要病害类型为剪切拉裂破坏、浸水沉陷破坏、剥蚀坍塌破坏、推挤滑动破坏。还提出了相应的软基处理方法及建议。  相似文献   

胶辽鲁西徐淮地区新元古代地层多重划分对比          下载免费PDF全文

许克民  王来明  刘桂玲  张增奇  汪又平  胡艳蕾 《山东国土资源》2004,20(5):26-31,36

依据岩性组合、古生物特征及地震事件层研究，对胶辽鲁西徐淮地区新元古代地层可作如下多重划分对比：鲁西黑山官组、二青山组分别与辽东的钓鱼台组，南芬组相当，胶东豹山口组可与南芬组对比，它们同属青白口系。辽东南关岭组下部、鲁西石旺庄组下部、苏皖北部贾园组、淮南九里桥组皆为一套砂灰岩组合，都发育第一期地震事件层，并开始含有后生动物化石，为等时地层单位，与其以上各前寒武岩石地层单位同属灯影峡阶，鲁西的佟家庄组、浮来山组可分别与辽东桥头组、长岭子组、胶东辅子夼组、南庄组、苏皖北部兰陵组一城山组、淮南伍山组一四十里长山组对比，归属《中国区域年代地层(地质年代)表》新划分的陡山陀阶。  相似文献   

An Early Investigation Of The Striated Tail Of Comet Hale-Bopp (C/1995 O1)     

Pittichovâ  J.  Sekenina  Z.  Birkle  K.  Boehnhardt  J.  Engels  D.  Keller  P. 《Earth, Moon, and Planets》1997,78(1-3):329-338

The Sekanina-Farrell particle fragmentation model for the striated tails of dust comets is successfully applied to two images of comet Hale-Bopp to study the motions of 12 striae in a time span of March 12–15, 1997. There is evidence for recurring outbursts with a periodicity of 11^h21^m, consistent with results based on analysis of dust jets. The ejecta in all the striae appear to have been released from one source on the nucleus between the end of January and the second half of February 1997, some 60 to 40 days before perihelion. The parent particles were subjected to a radiation pressure acceleration of β_p ≃ 0.55 and their fragmentation lifetimes in 11 of the 12 striae were practically constant and equal to 13–15 days, when normalized to 1 AU from the Sun. Brief analysis of Watanabe et al.'s measurements of striae on their images from March 5–9, 1997 shows even shorter fragmentation lifetimes for the parent particles, mostly about 7–11 days at1 AU. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

ELECTROCHEMICAL CORROSION BEHAVIOR OF STEEL IN THE JUNCTURE AREA OF SEA CLAY AND SAND     

张经磊  侯保荣  郭公玉  杨芳英  谢肖勃 《中国海洋湖沼学报》1993,11(2):171-175

Corrosion behavior of steel in the juncture area of sea clay and sand was studied. The results show that galvanic corrosion occurred between steel samples buried in sea clay and sand, and that the polarity of the galvanic cell reversed after some testing later. The cause of reversing of polarity is discussed.  相似文献   

Urban tourism research methodology     

Tao Wei  Zhong Wen-hui  Hong Yan 《中国地理科学(英文版)》2005,15(2):173-178

  相似文献   

The response of two half spaces to point dislocations at the material interface   总被引：1，自引：0，他引：1  

Yehuda Ben-Zion 《Geophysical Journal International》1990,101(3):507-528

  相似文献   

凤太矿田层控铅锌(铜)矿床的成矿物质来源探讨     

隗合明  吕仁生 《地球科学与环境学报》1990,(1)

秦岭凤太矿田层控铅锌(铜)矿床的金属物质、硫和成矿溶液主要来自深部基底的岩石,属海底喷流—沉积成因矿床。从这一理论认识出发可进一步分析控矿地质条件及今后在该区有效地寻找同类矿床。  相似文献   

广西岩溶区金属硫化物矿床风化与元素表生迁移特征     

农毅平 《南方国土资源》1996,(3)

对广西岩溶区三个铅锌硫化物矿床风化带观测结果表明，中低山岩溶区硫化物矿床具有更强烈的风化淋滤作用，但次生晕面积较小；岩溶平原区硫化物矿床风化与元素表生迁移特征较相似于非岩溶区的情况，表现在可产生较宽的ｐＨ偏低带和较大面积的次生晕  相似文献   

DCMT光电扫描主测微器的设计与研究     

李志刚  李焕信  方福胜  朱紫  许林生 《时间频率学报》1993,(1)

DCMT主测微器不同于其它类型的子午环测微器,它具有自校准测定仪器参数的功能。该测微器采用了活动光栅的方案,其优点是能观测近极星和各类准直像;活动光栅另一个显著优点是不同赤纬星几乎可用相同的观测时间.对“V”形光栅的工作原理和误差进行了详细讨论,并给出了一组严格的公式。其系统误差来源有:光栅形状改正、光栅驱动方向相对于光栅的倾斜、光栅驱动方向相对于赤径方向的倾斜、星径曲率改正。  相似文献   

The second order characteristic condition for plastic flow     

Graham Weir  Roger Young 《国际地质力学数值与分析法杂志》2003,27(15):1299-1316

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献