一种快速的全色和多光谱图像融合算法     

毛克 《测绘科学》2016,41(1):151-153,98

针对非下采样Contourlet变换(NSCT)在全色和多光谱图像融合中计算复杂度较高的问题,文章提出了一种快速的基于NSCT和超维彩色空间变换(HCT)相结合的融合算法:采用HCT变换提取多光谱图像的亮度分量,使得任意波段的多光谱图像跟全色图像融合的计算复杂度降低;采用NSCT进行融合,使得融合结果的空间分辨率提高的同时,保留原光谱特性。基于Pleiades卫星图像的实验结果表明,跟NSCT变换相比,本文提出的融合算法的融合结果空间细节更加突出,光谱畸变更小,同时计算复杂度显著降低。  相似文献   

结合像元分解和STARFM模型的遥感数据融合   总被引：4，自引：2，他引：2  

谢登峰  张锦水  孙佩军  潘耀忠  云雅  袁周米琪 《遥感学报》2016,20(1):62-72

高空间、时间分辨率遥感数据在监测地表快速变化方面具有重要的作用。然而,对于特定传感器获取的遥感影像在空间分辨率和时间分辨率上存在不可调和的矛盾,遥感数据时空融合技术是解决这一矛盾的有效方法。本文利用像元分解降尺方法(Downscaling mixed pixel)和STARFM模型(Spatial and Temporal Adaptive Reflectance Fusion Model)相结合的CDSTARFM算法(Combination of Downscaling Mixed Pixel Algorithm and Spatial and Temporal Adaptive Reflectance Fusion Model)进行遥感数据融合。首先,利用像元分解降尺度方法对参与融合的MODIS数据进行分解降尺度处理;其次,利用分解降尺度的MODIS数据替代STARFM模型中直接重采样的MODIS数据进行数据融合;最后以Landsat 8和MODIS遥感影像数据对该方法进行了实验。结果表明:(1)CDSTARFM算法比STARFM和像元分解降尺度算法具有更高的融合精度;(2)CDSTARFM能够在较小的窗口下获得更高的融合精度,在相同的窗口下其融合精度也高于STARFM;(3)CDSTARFM融合的影像更接近真实影像,消除了像元分解降尺度影像中的"图斑"和STARFM模型融合影像中的"MODIS像元边界"。  相似文献   

资源三号卫星影像融合优化方法探讨     

吴满意  付冬暇  王占宏  田怀启  张光辉  于金芝 《测绘科学》2016,41(6):108-112

针对资源三号卫星影像如何进行影像融合、波段组合才能到达到最佳视觉效果还没有统一意见的问题,该文提出了利用目前测绘项目中普遍采用的融合算法、波段组合比例对不同地形类别资源三号卫星影像进行实验验证的方法。综合主观评价与客观评价融合后的影像质量,得出了Subtractive、Pansharp和Pansharp2方法较为适合资源三号卫星影像融合的结论,其中绿波段与近红外波段的最佳组合比为9∶1。同时,分析了资源三号卫星影像融合后数据量大大增加、如何将近红外波段的波谱信息合理地加入到红、绿、蓝波段中等问题。  相似文献   

An efficient application of fusion approach for hot spot detection with MODIS and PALSAR-1 data     

Tasneem Ahmed  Shweta Gupta  Balasubramanian Raman 《国际地球制图》2016,31(7):715-738

Hot spot detection with satellite images, especially with synthetic aperture radar (SAR) images is still a challenging task. Several researchers have used TM/optical data for identification of hot spot but the use of SAR data is very limited for this type of application. The fusion of SAR data with TM/optical data may add additional information which in turn will lead for enhancement of detection capability of the hot spot. Therefore, this study explores the possibility of fusion of Moderate Resolution Imaging Spectroradiometer (MODIS) and Phased Array L-band Synthetic Aperture Radar (PALSAR) satellite images for the hot spot detection. Image fusion is emerging as a powerful tool where information of various sensors can be used for obtaining better results. For this purpose, vegetation greenness and roughness information which is obtained from MODIS and PALSAR satellite images, respectively, are used for fusion, and then, a contextual-based thresholding algorithm is applied to the fused image for hot spot detection. The proposed approach comprises of two steps: (1) application of genetic algorithm-based scheme for image fusion of MODIS and PALSAR satellite images, and (2) classification of the fused image as either hot spot or non-hot spot pixels by employing a contextual thresholding technique. The algorithm is tested over the Jharia Coal Field region of India, where hot spot is one of the major problems and it is observed that the proposed thresholding technique classifies the each pixel of the fused image into two categories: hot spot and non-hot spot and the proposed approach detects the hot spot with better accuracy and less false alarm.  相似文献   

SPOT5卫星影像在矿山环境调查中的应用     

白光宇  田磊  张德强 《城市地质》2016,(3):83-86

以吉林省辽源市煤炭矿山为研究对象,通过对SPOT5卫星影像纠正、融合、解译等处理,快速、便捷地查清矿区的地质环境问题:矿区固体废物堆放、尾矿库分布情况;矿山采空区地面塌陷、山体开裂、滑坡、崩塌、泥石流、岩溶塌陷、煤田自燃等地质灾害分布情况;由矿产开发引发的水土流失、土地沙化、侵占土地、植被破坏的情况;矿区水体、植被、土壤污染状况等。通过矿山地质环境调查实践,总结出了SPOT5卫星影像最优波段组合、融合方法及矿山地质环境调查中的地物判读标志,从而使SPOT5卫星影像在遥感环境地质调查中发挥了重要作用。  相似文献   

多波束声呐和侧扫声呐数据融合方法研究综述          下载免费PDF全文

房旭东  钟贵才 《海岸工程》2016,35(4):63-68

多波束声呐系统与侧扫声呐系统均为海底面探测的重要工具,二者均采用声学方法,在工作原理上存在异同。本文简要介绍了二者的研究进展,分别对其数据处理进行了比对分析,认为多波束声呐处理方法侧重于数据的测量精度,而侧扫声呐则主要侧重于图像处理;归纳了当前二者主要的数据匹配融合方法,包括同名特征融合、基于SURF算法的匹配融合以及特征点融合,从数据采集原理上对数据融合方法进行了深入分析,发现在探头定位、单ping数据点分布以及ping之间的数据定位上存在一定的困难,即使经过一定的处理,二者采集的也非简单的平面图像,故二者的数据融合尚存在一定的难度。  相似文献   

Spatial data fusion in Spatial Data Infrastructures using Linked Data     

Stefan Wiemann  Lars Bernard 《International journal of geographical information science》2016,30(4):613-636

  相似文献   

Ablation Characteristic of Ilmenite using UV Nanosecond and Femtosecond Lasers: Implications for Non‐Matrix‐Matched Quantification          下载免费PDF全文

Zhen Li  Zhaochu Hu  Detlef Günther  Keqing Zong  Yongsheng Liu  Tao Luo  Wen Zhang  Shan Gao  Shenghong Hu 《Geostandards and Geoanalytical Research》2016,40(4):477-491

Ilmenite (FeTiO₃) is a common accessory mineral and has been used as a powerful petrogenetic indicator in many geological settings. Elemental fractionation and matrix effects in ilmenite (CRN63E‐K) and silicate glass (NIST SRM 610) were investigated using 193 nm ArF excimer nanosecond (ns) laser and 257 nm femtosecond (fs) laser ablation systems coupled to an inductively coupled plasma‐mass spectrometer. The concentration‐normalised ⁵⁷Fe and ⁴⁹Ti responses in ilmenite were higher than those in NIST SRM 610 by a factor of 1.8 using fs‐LA. Compared with the 193 nm excimer laser, smaller elemental fractionation was observed using the 257 nm fs laser. When using 193 nm excimer laser ablation, the selected range of the laser energy density had a significant effect on the elemental fractionation in ilmenite. Scanning electron microscopy images of ablation craters and the morphologies of the deposited aerosol materials showed more melting effects and an enlarged particle deposition area around the ablation site of the ns‐LA‐generated crater when compared with those using fs‐LA. The ejected material around the ns crater predominantly consisted of large droplets of resolidified molten material; however, the ejected material around the fs crater consisted of agglomerates of fine particles with ‘rough' shapes. These observations are a result of the different ablation mechanisms for ns‐ and fs‐LAs. Non‐matrix‐matched calibration was applied for the analysis of ilmenite samples using NIST SRM 610 as a reference material for both 193 nm excimer LA‐ICP‐MS and fs‐LA‐ICP‐MS. Similar analytical results for most elements in ilmenite samples were obtained using both 193 nm excimer LA‐ICP‐MS at a high laser energy density of 12.7 J cm^?2 and fs‐LA‐ICP‐MS.  相似文献   

熔融制样-X射线荧光光谱法测定电气石中12种主次量元素     

夏传波  成学海  张会堂  赵伟  王卿 《岩矿测试》2018,37(1):36-42

电气石是一类含硼的铝硅酸盐矿物,化学成分复杂、化学稳定性强,不易湿法分解,B_2O_3含量较高,导致其主次量元素的同时测定存在一定困难。本文采用熔融法制样,建立了X射线荧光光谱法测定电气石Na_2O、MgO、Al_2O_3、SiO_2、P_2O_5、K_2O、CaO、TiO_2、V_2O_5、Cr_2O_3、MnO、TFe_2O_3等主次量元素的分析方法。样品与四硼酸锂-偏硼酸锂-氟化锂(质量比为4.5∶1∶0.4)混合熔剂的稀释比例为1∶10,消除了粒度效应和矿物效应;在缺少电气石标准物质的情况下,选择土壤、水系沉积物及多种类型的地质标准物质绘制校准曲线,利用含量与电气石类似的标准物质验证准确度,测定结果的相对标准偏差小于4.2%。采用所建方法测定四种不同类型电气石实际样品,测定值与经典化学法基本吻合。本方法解决了电气石不易湿法分解和硼的干扰问题,测定结果准确可靠,与其他方法相比操作简便,分析周期短。  相似文献   

Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000     

U. G. Sefercik  S. Karakis  C. Atalay  I. Yigit  U. Gokmen 《国际地球制图》2018,33(10):1139-1154

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.  相似文献