溪洛渡水电站坝址区岩体蠕变特性试验研究   总被引：8，自引：1，他引：8  

徐平  丁秀丽  全海  郭惠丰 《岩土力学》2003,(Z1)

介绍了溪洛渡水电站坝址区岩体柔性板法蠕变试验方法及试验结果,给出了岩体蠕变模型及其参数,为工程设计提供了参考依据。  相似文献   

桩长及水泥掺入量对柔性桩承载力等的影响   总被引：16，自引：1，他引：16  

费勤发  马海龙 《岩土力学》1997,18(1):54-59

采用弹性无限半空间体内的Mindlin应力解和分层总和法，计算分析了柔性桩的荷载传递规律，较详细地讨论了桩长、固化剂（水泥）掺入量对柔性桩复合地基承载力、变形的影响。计算值与实测值比较吻合。  相似文献   

Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser     

Chainarong ATHISAKUL  Karun KLAYCHAM  Somchai CHUCHEEPSAKUL 《中国海洋工程》2014,(6):829-842

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.  相似文献   

Marine riser emergency disconnection analysis using scalar elements for tensioner modelling     

《Applied Ocean Research》2016

This work proposes nonlinear parallel spring-damper scalar elements in series with a rigid beam element to represent drilling riser tensioner behavior during an emergency disconnection scenario in global riser analysis. The software package used was Orcaflex. This is a simpler approach than the more complex, full hydraulic-pneumatic-mechanic dynamic simulation modelling of the tensioning system, commonly used in literature, which can be time consuming and numerically more sensitive. The model can also be used to represent top tension variation in global riser analysis, allowing for more complex and precise simulations, especially for fatigue life and overpull estimations. The results show adequate agreement with the researched bibliography.  相似文献   

Experimental investigation of the effects of the coverage of helical strakes on the vortex-induced vibration response of a flexible riser     

《Applied Ocean Research》2016

The effects of different helical strake coverage on the vortex-induced vibration (VIV) of a model flexible riser were studied experimentally, with the aim of further improving the understanding of VIV responses. Uniform and linearly sheared currents were simulated to study response parameters such as non-dimensional displacement, fatigue damage, suppression efficiency, and the comprehensive evaluation is further studied. Test results of the bare model for a uniform current showed that the behavior of both the standing wave and traveling wave dominated VIV displacement. However, for a linearly sheared current, traveling wave behavior dominated VIV displacement in the high-velocity range. The results of the straked model tests indicated that the response was strongly dependent upon the amount of coverage of helical strakes. The flexible riser with 75% strake coverage gave the best comprehensive evaluation in a uniform current, and 50% strake coverage gave the best comprehensive evaluation in a linearly sheared current.  相似文献   

Performance of pile-restrained flexible floating breakwaters     

Ioanna Diamantoulaki  Demos C. Angelides  George D. Manolis 《Applied Ocean Research》2008,30(4):243-255

The overall performance of pile-restrained flexible floating breakwaters is investigated under the action of linear monochromatic incident waves in the frequency domain. The aforementioned floating breakwaters undergo only vertical structural deflections along their length and are held in place by means of vertical piles. The total number of degrees of freedom equals the six conventional body modes, when the breakwater moves as a rigid body, plus the extra bending modes. These bending modes are introduced to represent the structural deflections of the floating breakwater and are described by the Bernoulli–Euler flexible beam equation. The number of bending modes introduced is determined through an appropriate iterative procedure. The hydrostatic coefficients corresponding to the bending modes are also derived. The numerical analysis of the flexible floating breakwaters is based on a three-dimensional hydrodynamic formulation of the floating body. A parametric study is carried out for a wide range of structural stiffness parameters and wave headings, to investigate their effect on the performance of flexible floating breakwaters. Moreover, this performance is compared with that of the corresponding pile-restrained rigid floating breakwater. Results indicated that the degree of structural stiffness and the wave heading strongly affect the performance of flexible floating breakwaters. The existence of an “optimum” value of structural stiffness is demonstrated for the entire wave frequency range.  相似文献   

Experimental Study on Coupled Cross-Flow and in-Line Vortex-Induced Vibration of Flexible Risers   总被引：1，自引：1，他引：0  

郭海燕  娄敏 《中国海洋工程》2008,22(1):123-129

In this work, we study the coupled cross-flow and in-line vortex-induced vibration （VIV） of a fixedly mounted flexible pipe, which is free to move in cross-flow （ Y- ） and in-line （ X- ） direction in a fluid flow where the mass and natural frequencies are precisely the same in both X- and Y-direction. The fluid speed varies from low to high with the corresponding vortex shedding frequency varying from below the first natural frequency to above the second natural frequency of the flexible pipe. Particular emphasis was placed on the investigation of the relationship between in-line and cross-flow vibration. The experimental results analyzed by using these measurements exhibits several valuable features.  相似文献   

Bragg reflection of water waves by multiple floating horizontal flexible membranes with submerged rectangular bars on the seabed     

《Applied Ocean Research》2019

Bragg reflection of water waves by multiple floating horizontal flexible membranes is investigated based on the linear wave theory and the assumption of small membrane response. Under the floating horizontal membranes, periodical submerged rectangular bars are arranged on the flat seabed. The total reflection and transmission coefficients are obtained by using the eigenfunction expansion method and the wide spacing approximation. The calculated coefficients are validated with the results available in the literature, which shows that the present method is applicable. The characteristics of Bragg reflection are systematically investigated by changing various parameters including the height of the rectangular bars, the number, the tension, the spacing, and the length of the flexible membranes. The results can help designing multiple floating horizontal flexible membranes as effective floating breakwaters by taking advantage of Bragg reflection.  相似文献   

Feedback control system for blow-out preventer positioning     

《Applied Ocean Research》2019

During the drilling of ultra-deep-water subsea petroleum wells, a blow-out preventer (BOP), a piece of safety equipment, must be assembled on the wellhead. The BOP is suspended using the drilling riser during the wellhead approach operation, and the riser's top end is connected to the floating platform rig. This article presents a feedback control system for the automatic approach of the BOP to the wellhead. Compared to state-of-the-art controls, ours does not require ancillary thrusters installed alongside the riser nor inclination sensors atop of the drilling riser. Additionally, our proposed control embeds a closed-loop dynamic positioning system, thus retaining the characteristics of the original control system and adding an extra closed-loop. This eases implementation of the BOP approach control to an existing platform. To calculate the optimal gains for the BOP controller, we assume a linear system for the riser, including only the pendulum-shape. The simulation is carried out using nonlinear models for both riser and floating platform. We assume an International Towing Tank Conference standard semi-submersible platform, coupled with a 3000-m free-hanging vertical riser for the time-domain simulation. The results show the BOP tracking to be a step-shaped input signal under current and wave loads. A discussion of the performance of feedback control under different environmental loads is also included.  相似文献   

阻尼器连接填充墙在柔性框架结构中的应用研究     

鲁亮  李远清  赵菲 《地震工程与工程振动》2021,41(1):70-77

阻尼器连接填充墙采用黏滞阻尼器与主体框架结构连接,是一种新型填充墙与框架的柔性连接方式,能满足柔性框架结构的大变形需求.为使得阻尼器连接填充墙达到最优的力学性能,结构布置和构件力学参数的选择十分重要,采用有限元软件ABAQUS分别建立了柔性钢框架结构和阻尼器连接填充墙-框架结构的有限元模型,考察不同阻尼系数阻尼器连接填...  相似文献