山东省临邑县临盘镇地裂冒喷水油灾害初步分析   总被引：1，自引：0，他引：1  

徐守余 《中国地质灾害与防治学报》2005,16(3):90-93

1998年7月临邑县临盘镇西十二里村发生地裂冒喷水油灾害：对此次灾害研究认为，灾害发生前地应力已有明显改变，这种改变应是自然因素造成的，油田开发难以直接引发断层的活动。因此，地裂冒喷水、油灾害是因活动性断昙——临邑断层在局部薄弱部位活动而引起的，断层活动使地下流体顺断层涌出地表，是自然地质灾害。灾害的诱发因素是多方面的，其中地面不均衡沉降耦合使得地下应力布不均习，导致在断层的薄弱部位产生应力集中，并引发灾害发生。灾害发生已使得地下不均衡应力得以释放，近期内再次发生灾害的可能性不大。  相似文献   

生物膜处理技术的研究进展   总被引：3，自引：0，他引：3  

吴会中  单欣  赵琛琛 《中国勘察设计》2005,(11):52-54

本文综述了生物膜技术的发展概况及其传质理论,并且对各种类型生物膜反应器的应用和发展作了简要论述,最后提出了生物膜技术的发展方向。  相似文献   

人工神经网络在天津市区地面沉降预测中的应用   总被引：8，自引：1，他引：8  

李涛  潘云  娄华君  李波  王宏  邹立芝 《地质通报》2005,24(7):677-681

在分析天津市区地面沉降特点的基础上，结合人工神经网络原理，选择1961-1980年的天津市区降水量、地下水开采量、前年沉降量、固结度作为训练样本的输入量，以这20年的地面沉降量作为输出量，用贝叶斯正则化算法训练BP网络，得到沉降的仿真模型。并把1981-1993年的资料用来进行预测检验，结果表明这是一种比较理想的地面沉降预测方法。最后在不同的降水量保证率下，预测了到2010年天津市区地面沉降的情况。  相似文献   

地下圆形衬砌隧道对沿线地震动的影响(II):数值结果   总被引：5，自引：3，他引：5  

梁建文  纪晓东  Vincent W Lee 《岩土力学》2005,26(5):687-692

利用地下圆形衬砌隧道对入射平面P波和SV波散射级数解答，定量分析了入射波长、入射角度、隧道直径、衬砌刚度等因素对沿线地表位移放大作用的影响。计算结果表明，当入射频率较低时，地下隧道的存在对地表位移幅值影响不大；而当入射频率较高时，地表位移幅值可以达到无隧道情况的4．5倍以上；衬砌情况下地表位移幅值可以高出非衬砌情况的87．8％。建议在地铁的规划设计中考虑地下隧道的建设对隧道沿线设计地震动的影响。  相似文献   

地下水资源管理预警系统的建立及应用研究——以长春城区为例   总被引：8，自引：0，他引：8       下载免费PDF全文

王凯军  曹剑峰  徐蕾  孙涛 《水科学进展》2005,16(2):238-243

由于长春城区地下水的超采产生了环境恶化,结合地下水预测模型和地质及水文地质条件,以长春城区为例建立了地下水资源管理预警模型。根据长春城区的地质及水文地质条件提出水位水质预警标准,并根据模型编制了地下水资源管理预警系统。利用所建立的预警系统,对现状和未来开采条件下水位水质进行预警,从而为水资源的科学管理和持续利用提供可靠依据和保障。  相似文献   

不正常的自记记录处理及在报表编制过程的处理方法     

程爱珍 《气象研究与应用》2002,23(4):61-62

介绍在处理自记观测记录时,对不正常记录及在编制报表时应采取的处理方法。  相似文献   

耒宜高速公路路堑边坡变形破坏特征及其综合治理   总被引：2，自引：2，他引：2  

肖剑秋  卿笃干  赵海斌  钟辉亚 《工程地质学报》2002,10(1):89-92

耒宜高速公路修建于山岭重丘区 ,沿线地形、地质条件差异较大 ,路堑开挖边坡类型较多 ,特征不一。本文介绍了路堑边坡的主要特征、边坡失稳的主要原因及治理对策。  相似文献   

Optimum multiple tuned mass dampers for structures under the ground acceleration based on DDMF and ADMF     

Chunxiang Li 《地震工程与结构动力学》2002,31(4):897-919

Multiple tuned mass dampers (MTMD) consisting of many tuned mass dampers (TMDs) with a uniform distribution of natural frequencies are taken into consideration for attenuating undesirable vibration of a structure under the ground acceleration. A study is conducted to search for the preferable MTMD which performs better and is easily manufactured from the five available models (i.e. MTMD‐1 – MTMD‐5), which comprise various combinations of the stiffness, mass, damping coefficient and damping ratio in the MTMD. The major objective of the present study then is to evaluate and compare the control performance of these five models. The structure is represented by its mode‐generalized system in the specific vibration mode being controlled by adopting the mode reduced‐order approach. The optimum parameters of the MTMD‐1 – MTMD‐5 are investigated to reveal the influence of the important parameters on their effectiveness and robustness using a numerical searching technique. The parameters include the frequency spacing, average damping ratio, tuning frequency ratio, mass ratio and total number. The criteria selected for the optimum searching are the minimization of the maximum value of the displacement dynamic magnification factor (DDMF) and that of the acceleration dynamic magnification factor (ADMF) of the structure with the MTMD‐1 – MTMD‐5 (i.e. Min.Max.DDMF and Min.Max.ADMF). It is demonstrated that the optimum MTMD‐1 and MTMD‐4 yield approximately the same control performance, and offer higher effectiveness and robustness than the optimum MTMD‐2, MTMD‐3, and MTMD‐5 in reducing the displacement and acceleration responses of structures. It is further demonstrated that for both the best effectiveness and robustness and the simplest manufacturing, it is preferable to select the optimum MTMD‐1. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions     

M. C. Griffith  A. Kawano  R. F. Warner 《地震工程与结构动力学》2002,31(10):1879-1888

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Damaging properties of ground motions and prediction of maximum response of structures based on momentary energy response     

Norio Hori  Norio Inoue 《地震工程与结构动力学》2002,31(9):1657-1679

Dynamic damaging potential of ground motions must be evaluated by the response behaviour of structures, and it is necessary to indicate what properties of ground motions are most appropriate for evaluation. For that purpose, the behaviour of energy input process and hysteretic energy dissipation are investigated in this study. It is found that the momentary input energy that is an index for the intensity of input energy is related to the characteristics of earthquakes such as cyclic or impulsive, and to the response displacement of structures immediately. On the basis of these results, a procedure is proposed to predict inelastic response displacement of structures by corresponding earthquake input energy to structural dissipated damping and hysteretic energy. In this procedure the earthquake response of structures is recognized as an input and dissipation process of energy, and therefore structural properties and damaging properties of ground motions can be taken into account more generally. Lastly, the studies of the pseudodynamic loading test of reinforced concrete structure specimens subjected to ground motions with different time duration are shown. The purpose of this test is to estimate the damaging properties of ground motions and the accuracy of the proposed prediction procedure. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献