长江口沉积物~(210)Pb分布及沉积环境解释     

段凌云  王张华  李茂田  潘建明  陈中原  Yishiki Saito  Yutaka kanai 《沉积学报》2005,(3)

在长江河口潮滩、分流河道和水下三角洲共获得18个柱样,进行沉积学分析和210Pb测定,并对其中6根柱样进行137Cs测定。经研究发现,长江口外在水深25～30m,122°30′N,31°00′E附近存在一个泥质沉积中心,沉积速率达2.0～6.3cm/yr。另外,在潮滩和涨潮槽也获得较高沉积速率,其中南汇和横沙岛潮滩沉积速率(1.03～1.94cm/yr)高于崇明东滩(0.51～0.76cm/yr),涨潮槽沉积速率也达0.86cm/yr。此外,在石洞口、南汇、九段沙潮滩和三角洲前缘有部分柱样未获沉积速率,推测为沉积环境不稳定或沉积速率过快所致。  相似文献   

Transport rate of calcareous sand in unidirectional flow     

DAVID A. SMITH  KWOK FAI CHEUNG 《Sedimentology》2005,52(5):1009-1020

This paper examines the transport of calcareous sand in unidirectional flow and its prediction through existing sediment transport models. A flume experiment of four sand samples collected on Oahu, Hawaii, provides 29 sets of sediment transport data in the bed-form and suspended transport stages. The measured transport data are compared with direct predictions from four energy-based transport models developed for siliceous particles. Corrections for the grain-size, fall velocity, and critical velocity of calcareous sand based on recent research are applied to the models and the results are compared with the direct calculations and measured data. The comparison illustrates the important role particle shape plays in the transport of calcareous sand. All four sediment transport models give consistent predictions and good agreement with the majority of the measured data. Two of the models respond positively to the corrections in both the bed-form and suspended transport stages indicating that such an approach may provide an interim solution for the transport of calcareous sand.  相似文献   

K-Ar Ages of Granitic Magmatism and Related Pegmatite Formation at the Umanotani-Shiroyama Mine, Shimane Prefecture, SW Japan and Their Bearings on Cooling History     

Shouji Kihara    Kenichi Hoshino    Makoto Watanabe    Hirotsugu Nishido  Shunso Ishihara 《Resource Geology》2005,55(2):123-129

Abstract. The Umanotani-Shiroyama pegmatite deposits, the largest producer of K-feldspar and quartz in Japan, are of typical granitic pegmatite. Ilmenite-series biotite granite and granite porphyry, hosting the ore deposits, and biotites separated from these rocks yielded K-Ar ages ranging from 89.0 to 81.4 Ma and 95.2 to 93.7 Ma, respectively. Muscovite and K-feldspar separated from the ore zone yielded K-Ar ages with the range of 96.2 to 93.1 Ma and 87.3 to 80.7 Ma, respectively. Muscovites from quartz-muscovite veins in the ore zone and in the granite porphyry yielded K-Ar ages of 90.4 and 76.3 Ma, respectively. K-feldspar is much younger in age than coexisting muscovite. It is noted that the K-Ar ages of biotite separates and the whole-rock ages are identical to those of muscovite and K-feldspar in the ore zone, respectively. These time relations, as well as field occurrence, indicate that the formation of the pegmatite deposits at the Umanotani-Shiroyama mine is closely related in space and time to a series of granitic magmatism of ilmenite-series nature. Using closure temperatures of the K-Ar system for biotite and K-feldspar (microcline), cooling rate of the pegmatite deposits is estimated to be about 82C/m.y. at the beginning, but slowed down to about 15C/m.y. in the later period.  相似文献   

北京石花洞地区奥陶纪灰岩36Cl侵蚀速率初探     

晁念英  潘欢迎  刘存富  万军伟  王佩仪  姜山  何明  武绍勇 《地球学报》2005,26(Z1):272-274

本文根据理论上灰岩中36Cl的5个来源，论述了36Cl在灰岩深度剖面上的4个分布特征，描述了36Cl的采样方法和AMS的分析技术。计算出北京石花洞地区奥陶纪（O2）灰岩的表面侵蚀速度（ε=17.40μm/a）。  相似文献   

Determination of groundwater availability in shallow arid region aquifers utilizing GIS technology: a case study in Hada Al-Sham, Western Saudi Arabia     

A. S. El-Hames  K. A. Al-Ahmed 《Hydrogeology Journal》2005,13(4):649-648

A simple, physically based method is developed in this paper to assist in the allocation of areas with high groundwater potential and for the determination of maximum allowed pumping rate to ensure proper groundwater management. This method utilizes the aquifer physical properties as well as GIS technology to accomplish this purpose. The design of this method was considered to be applicable in areas with little data, such as in most arid regions. This technique was applied to a catchment in an arid environment where qualitative as well as quantitative analyses of the results were undertaken. Locations of available groundwater and rates of maximum allowable pumping were compared with observations and experiments in the field and a good agreement was found. It was concluded that the best groundwater location was in the alluvial area, which represents only 16% of the total aquifer, which is a typical case in arid region catchments. The rate of maximum pumping was estimated to be 65 m³/h. However, to benefit 55% of the area, the maximum pumping rate should only be 40 m³/h with an average rate throughout the area (55%) of about 24 m³/h.This revised version was published online in December 2004 with corrections to the category.  相似文献   

Numerical simulation of percussive drilling          下载免费PDF全文

Alexandre Depouhon  Vincent Denoël  Emmanuel Detournay 《国际地质力学数值与分析法杂志》2015,39(8):889-912

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Potential seasonal calibration for palaeoenvironmental reconstruction using skeletal microstructures and strontium measurements from the cold‐water coral Lophelia pertusa          下载免费PDF全文

VINCENT MOUCHI  QUENTIN G. CROWLEY  ANDREW L. JACKSON  FRANK MCDERMOTT  XAVIER MONTEYS  MARC DE RAFÉLIS  JOSÉ LUIS RUEDA  FRANCK LARTAUD 《第四纪科学杂志》2014,29(8):803-814

  相似文献   

Exploration of remotely sensed forest structure and ultrasonic range sensor metrics to improve empirical snow models          下载免费PDF全文

Andrés Varhola  Nicholas C. Coops  Younes Alila  Markus Weiler 《水文研究》2014,28(15):4433-4448

Current methods to estimate snow accumulation and ablation at the plot and watershed levels can be improved as new technologies offer alternative approaches to more accurately monitor snow dynamics and their drivers. Here we conduct a meta‐analysis of snow and vegetation data collected in British Columbia to explore the relationships between a wide range of forest structure variables – obtained from Light Detection and Ranging (LiDAR), hemispherical photography (HP) and Landsat Thematic Mapper – and several indicators of snow accumulation and ablation estimated from manual snow surveys and ultrasonic range sensors. By merging and standardizing all the ground plot information available in the study area, we demonstrate how LiDAR‐derived forest cover above 0.5 m was the variable explaining the highest percentage of absolute peak snow water equivalent (SWE) (33%), while HP‐derived leaf area index and gap fraction (45° angle of view) were the best potential predictors of snow ablation rate (explaining 57% of variance). This study reveals how continuous SWE data from ultrasonic sensors are fundamental to obtain statistically significant relationships between snow indicators and structural metrics by increasing mean r² by 20% when compared to manual surveys. The relationships between vegetation and spectral indices from Landsat and snow indicators, not explored before, were almost as high as those shown by LiDAR or HP and thus point towards a new line of research with important practical implications. While the use of different data sources from two snow seasons prevented us from developing models with predictive capacity, a large sample size helped to identify outliers that weakened the relationships and suggest improvements for future research. A concise overview of the limitations of this and previous studies is provided along with propositions to consistently improve experimental designs to take advantage of remote sensing technologies, and better represent spatial and temporal variations of snow. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Spatial and temporal variability of stable isotopes (δ18O and δ2H) in surface waters of arid,mountainous Central Asia     

Huawu Wu  Jinglu Wu  Kadyrbek Sakiev  Jinzhao Liu  Jing Li  Bin He  Ya Liu  Beibei Shen 《水文研究》2019,33(12):1658-1669

Characterization of spatial and temporal variability of stable isotopes (δ¹⁸O and δ²H) of surface waters is essential to interpret hydrological processes and establish modern isotope–elevation gradients across mountainous terrains. Here, we present stable isotope data for river waters across Kyrgyzstan. River water isotopes exhibit substantial spatial heterogeneity among different watersheds in Kyrgyzstan. Higher river water isotope values were found mainly in the Issyk‐Kul Lake watershed, whereas waters in the Son‐Kul Lake watershed display lower values. Results show a close δ¹⁸O–δ²H relation between river water and the local meteoric water line, implying that river water experiences little evaporative enrichment. River water from the high‐elevation regions (e.g., Naryn and Son‐Kul Lake watershed) had the most negative isotope values, implying that river water is dominated by snowmelt. Higher deuterium excess (average d = 13.9‰) in river water probably represents the isotopic signature of combined contributions from direct precipitation and glacier melt in stream discharge across Kyrgyzstan. A significant relationship between river water δ¹⁸O and elevation was observed with a vertical lapse rate of 0.13‰/100 m. These findings provide crucial information about hydrological processes across Kyrgyzstan and contribute to a better understanding of the paleoclimate/elevation reconstruction of this region.  相似文献   

Interpreting zirconium‐in‐rutile thermometric results          下载免费PDF全文

K. Taylor‐Jones  R. Powell 《Journal of Metamorphic Geology》2015,33(2):115-122

At first sight, experimental results and observations on rocks suggest that the Zr content in rutile, where equilibrated with quartz and zircon, should be a useful thermometer for metamorphic rocks. However, diffusion data for Zr in rutile imply that thermometry should not, for plausible rates of cooling, give the high temperatures commonly observed in high‐grade metamorphic rocks. It is suggested here that such observations can be accounted for by high‐T diffusive closure of Si in rutile, causing the interior of rutile grains to become insensitive to the thermometer equilibrium well above the temperature of Zr diffusive closure. Paired with comparatively slow grain boundary diffusion and problematic zircon nucleation, this allows for cases of Zr retention in rutile through temperatures where Zr is still diffusively mobile within rutile grains. Other observations that may be accounted for in this context are large inter‐grain ranges of rutile Zr contents uncorrelated with rutile grain size, and flat Zr profiles across individual rutile grains, counter to what would be expected from diffusive closure. A consequence is that it is unlikely that Zr‐in‐rutile thermometry will be useful for estimating rock cooling rates.  相似文献