A Bingham-plastic model for fluid mud transport under waves and currents     

刘春嵘  吴博  呼和敖德 《中国海洋工程》2014,28(2):227-238

Simplified equations of fluid mud motion, which is described as Bingham-Plastic model under waves and currents, are presented by order analysis. The simplified equations are non-linear ordinary differential equations which are solved by hybrid numerical-analytical technique. As the computational cost is very low, the effects of wave current parameters and fluid mud properties on the transportation velocity of the fluid mud are studied systematically. It is found that the fluid mud can move toward one direction even if the shear stress acting on the fluid mud bed is much smaller than the fluid mud yield stress under the condition of wave and current coexistence. Experiments of the fluid mud motion under current with fluctuation water surface are carried out. The fluid mud transportation velocity predicted by the presented mathematical model can roughly match that measured in experiments.  相似文献   

Dispersal of the Zhujiang River (Pearl River) derived sediment in the Holocene   总被引：2，自引：1，他引：1  

GE Qian  LIU J. P.  XUE Zuo  CHU Fengyou 《海洋学报(英文版)》2014,33(8):1-9

High-resolution Chirp profiling and coring reveals an elongated(ca. 400 km) Holocene Zhujiang River(Pearl River)-derived mud area(maximum thickness 20 m) extending from the Zhujiang River Delta, southwestward off the Guangdong coast, to the Leizhou Peninsula. Two depo-centers, one proximal and one distal, are identified. On the continental shelf off the west Guangdong Province, the mud is deposited in water depth shallower than 50 m; while to the southeast of the Zhujiang River Estuary, the mud area can extend to the-120 m isobath. A combined analysis with the stratigraphic sequences of other muddy deposits in the Western Pacific marginal seas(mainly Changjiang(Yangtze) and Huanghe(Yellow) Rivers derived) indicates that the initiation of the Zhujiang River muddy deposit can be further divided into two stages: Stage 1 is before the mid-Holocene sea-level highstand(ca. 7.0 cal. ka BP), the proximal mud was mostly deposited after 9.0 cal. ka BP, when the sea-level rose slowly after the Meltwater Pulse-1C; Stage 2, after the mid-Holocene sealevel highstand, clinoform developed on the continental shelf off the west Guangdong Province, extending ca. 400 km from the Zhujiang River Estuary. The proximal clinoform thins offshore, from ca. 10 m thickness around 5–10 m water depth to less than 1–2 m around 20–30 m water depth. In addition, we also find a developed distal clinoform in the east of the Leizhou Peninsula.  相似文献   

松辽盆地东南隆起区青山口组一段泥页岩地球化学特征及地质意义   总被引：1，自引：0，他引：1  

李翔  刘招君  孙平昌  李宝毅  柳蓉  张明明  甄甄  杨小红 《世界地质》2014,33(4):746-757

松辽盆地青山口组一段主要为暗色泥岩,并发育多层品质较好的油页岩。对盆地东南隆起区NGN1井泥岩系统取样测试,地球化学分析结果显示:w(Si O2)为44.88%~57.75%,w(K2O)一般比w(Na2O)高,w(Mg O+Fe2OT3)为4.5%~10.01%,表明泥岩中含有较多的含钾矿物和一定的铁镁质成分。样品微量元素PAAS标准化配分曲线显示样品中元素富集、亏损均呈现基本一致的趋势,表明泥岩沉积时期存在一种主要物源。稀土元素球粒陨石标准化后呈现出明显的右倾趋势和Eu的负异常,显示物源来自上地壳。泥岩CIA指数为48~62,Th/U值大都集中在1.48~4,表明泥岩源区经历了低等的风化作用;Th/Sc--Zr/Sc图解显示泥岩中的沉积碎屑没有经历沉积再循环,受原岩成分控制,表明地球化学数据可以进行物源类型和构造环境判断。根据原岩和构造背景判别图解,松辽盆地东南隆起区青一段泥岩物源主要为中—晚侏罗世中酸性喷发岩,并混有海西期和燕山期花岗岩;原岩的构造背景为大陆边缘造山运动形成的大陆岛弧。  相似文献   

真空预压法在珠江流域某冲填土场地的应用     

秦皎 《岩土工程技术》2014,(1):45-47,55

依托珠江流域某冲填土场地工程实例,介绍了真空预压法的施工参数及应用效果,另对“薄弱部位”泥浆搅拌桩密封墙处地层的强度进行了定量分析,结果表明真空预压法适用于此类场地,加固效果明显,但密封墙位置强度降幅较大,需采取换填等措施二次处理后才能使用,可为其他类似工程提供参考经验.  相似文献   

Mud dispersal across a Cretaceous prodelta: Storm‐generated,wave‐enhanced sediment gravity flows inferred from mudstone microtexture and microfacies     

A. Guy Plint 《Sedimentology》2014,61(3):609-647

Determining sediment transport direction in ancient mudrocks is difficult. In order to determine both process and direction of mud transport, a portion of a well‐mapped Cretaceous delta system was studied. Oriented samples from outcrop represent prodelta environments from ca 10 to 120 km offshore. Oriented thin sections of mudstone, cut in three planes, allowed bed microstructure and palaeoflow directions to be determined. Clay mineral platelets are packaged in equant, face‐face aggregates 2 to 5 μm in diameter that have a random orientation; these aggregates may have formed through flocculation in fluid mud. Cohesive mud was eroded by storms to make intraclastic aggregates 5 to 20 μm in diameter. Mudstone beds are millimetre‐scale, and four microfacies are recognized: Well‐sorted siltstone forms millimetre‐scale combined‐flow ripples overlying scoured surfaces; deposition was from turbulent combined flow. Silt‐streaked claystone comprises parallel, sub‐millimetre laminae of siliceous silt and clay aggregates sorted by shear in the boundary layer beneath a wave‐supported gravity flow of fluid mud. Silty claystone comprises fine siliceous silt grains floating in a matrix of clay and was deposited by vertical settling as fluid mud gelled under minimal current shear. Homogeneous clay‐rich mudstone has little silt and may represent late‐stage settling of fluid mud, or settling from wave‐dissipated fluid mud. It is difficult or impossible to correlate millimetre‐scale beds between thin sections from the same sample, spaced only ca 20 mm apart, due to lateral facies change and localized scour and fill. Combined‐flow ripples in siltstone show strong preferred migration directly down the regional prodelta slope, estimated at ca 1 : 1000. Ripple migration was effected by drag exerted by an overlying layer of downslope‐flowing, wave‐supported fluid mud. In the upper part of the studied section, centimetre‐scale interbeds of very fine to fine‐grained sandstone show wave ripple crests trending shore normal, whereas combined‐flow ripples migrated obliquely alongshore and offshore. Storm winds blowing from the north‐east drove shore‐oblique geostrophic sand transport whereas simultaneously, wave‐supported flows of fluid mud travelled downslope under the influence of gravity. Effective wave base for sand, estimated at ca 40 m, intersected the prodelta surface ca 80 km offshore whereas wave base for mud was at ca 70 m and lay ca 120 km offshore. Small‐scale bioturbation of mud beds co‐occurs with interbedded sandstone but stratigraphically lower, sand‐free mudstone has few or no signs of benthic fauna. It is likely that a combination of soupground substrate, frequent storm emplacement of fluid mud, low nutrient availability and possibly reduced bottom‐water oxygen content collectively inhibited benthic fauna in the distal prodelta.  相似文献   

小秦岭金矿田北矿带厚覆盖层钻探技术难点及对策          下载免费PDF全文

罗永贵  王红阳  刘建华 《探矿工程》2014,41(1):27-29,32

针对小秦岭金矿田北矿带厚覆盖层钻孔施工存在的技术难点进行分析,从钻进方法、钻孔结构、泥浆护壁、工艺措施等方面,研究出解决厚覆盖层钻孔绳索取心钻进的技术对策和措施,在生产实践中较好地解决了技术难点问题,并取得了好的经济技术效果。  相似文献   

云南罗平复杂地层煤矿勘查泥浆体系的研究与应用          下载免费PDF全文

徐铮  陈礼仪  章述  王新华  管强盛  邹杰 《探矿工程》2014,41(3):29-32

云南省曲靖市罗平县红丫口煤矿勘探项目临近大断裂带,受多期构造地质作用影响,走向逆断层发育,且发育有横向平移断层和少量正断层。地层受挤压变形严重,岩层倾角普遍较大,局部直立至倒转,地层破碎。上部漏水严重,下部钻遇多条断层破碎带以及煤系地层,造成钻进效率低下,钻孔事故频繁,甚至钻孔报废,严重影响勘查工作的顺利进行。针对这一系列的施工难题,经过多次研究和反复试验,探索出一种适合该矿区煤矿勘察复杂地层钻进的泥浆,保障了勘查项目的顺利完成。  相似文献   

冻土区天然气水合物钻井泥浆冷却系统设计及关键参数计算          下载免费PDF全文

李宽  张永勤  王汉宝  梁健  李鑫淼  吴纪修  李小洋 《探矿工程》2014,41(7):45-48

泥浆冷却技术是天然气水合物钻探的关键技术之一,低温泥浆可以抑制天然气水合物在钻进和提钻过程中分解,有利于钻获水合物实物样品。新型天然气水合物钻井泥浆冷却系统主要包括载冷剂制冷器、翅片管式换热器、温度监测与记录和防冻装置4部分。制冷机组采用变频启动,减小了野外施工中配套发电机的功率,大幅度降低油料消耗;翅片管式换热器中泥浆与载冷剂对流换热,换热面积大,换热效率高;温度监测与记录装置对4个关键节点的温度进行监测和记录,同时防冻装置可防止泥浆在换热器中结冰堵塞,影响正常使用。运用传热学和流体力学理论对泥浆与载冷剂对流换热过程进行计算,在满足制冷要求的前提下,换热器换热面积是10.58 m2,管路压力损失为0.34 MPa。  相似文献   

干涸尾闾湖盆区泥漠地表磨蚀释尘特征     

曲书锋  张国明  刘连友  李力  肖雨婷  向明珠  孙煦然  韩旭娇 《中国沙漠》2022,42(4):81-88

沙粒的表面磨蚀效应是地表产尘、释尘的重要机制,针对干湖盆泥漠地表开展磨蚀释尘实验研究,对理解干湖盆地表风蚀过程及盐碱尘暴形成机理具有重要意义。对采自西居延海干涸湖盆泥漠地表土样进行室内磨蚀模拟实验,研究了不同粒级（细、中、粗）沙粒不同落沙角度（30°,45°,60°）的磨蚀效应。结果表明：（1）泥漠地表磨蚀实验中能够产生明显释尘效应的沙粒粒级阈值为中沙（0.25 mm<M_d<0.50 mm）;（2）磨蚀粒径粒级相同时,磨蚀角度会对泥漠地表磨蚀释尘速率产生影响,磨蚀量的角度排序为60°>30°>45°,但同一粒级3种角度下的磨蚀释尘率差异不显著。（3）磨蚀角度为45°时,计算了泥漠地表的质量磨蚀率与能量磨蚀率,其中中沙为0.04 g·kg^-1、0.43 g·J^-1,粗沙为0.08 g·kg^-1、0.74 g·J^-1,极粗沙为0.26 g·kg^-1、2.54 g·J^-1;在磨蚀沙粒粒级倍增而磨蚀角度不变情况下,泥漠地表磨蚀释尘率与能量磨蚀率未发生正比例线性增长变化。  相似文献   

上天梯膨润土在钻井泥浆中的应用研究     

陈廷臻  涂焕生  郭辉  张军营 《河南国土资源》1996,(1)

信阳上天梯矿区钙基膨润土可分为四个自然类型。根据矿石理化性能和蒙脱石晶体结构特征，选用第Ⅲ类矿石，运用对辊挤压钠化法和最佳工艺进行实验研究，获得钻井泥浆用Ａ．Ｐ．Ｉ级膨润土。  相似文献