Investigation of upper crust anisotropy in Ghaen-Birjand region, east-central Iran     

Mohammad-Reza Gheitanchi  Zoya Zarifii 《地震学报(英文版)》2004,17(5):518-525

IntroductionWhenpropagatingthroughananisotropicmedium,ashearwavesplitsintotwo(quasi)shearwaveswithdifferentpropagationspeedsandpolarizedorthogonally.Owingtotherecentdevel-opmentofseismicobservationsystem,detectionofshearwavessplittingwithverysmalldelaytimesbetweenfasterandslowershearwavesbecameavailableandprovidedpowerfulapproachfordetectionofcrustalanisotropy.Crampin(1978)emphasizedtheroleofalignedmicrocracksasacauseofcrustalanisotropyandpointedoutthatforverticallyalignedmicrocracksthedirecti…  相似文献   

北京市春夏季大气气溶胶的单颗粒分析表征   总被引：9，自引：0，他引：9  

肖锐刘成德  梁汉东董树屏 F．Adams 《岩矿测试》2004,23(2):125-131

采集了北京市2000年春夏季大气气溶胶样品5个，采用扫描电镜X射线能谱技术分析大气气溶胶单颗粒约2500个。研究结果表明，沙尘期间，矿物尘是最主要的颗粒物种类，非沙尘期间，北京市大气气溶胶中主要检出矿物尘和含硫颗粒物。夏季随着颗粒物污染的加重，含硫颗粒物的数目百分数增加。是北京市大气颗粒物污染的重要特征。重点讨论了Ca-S颗粒、K-S颗粒和Ca-K-S颗粒三类典型含硫颗粒物的化学组成和粒径分布特征。数目可观的Ca-K-S颗粒以及其他硫酸盐颗粒的生成与相对湿度和云量等气象条件相关，这些颗粒物可能是云中过程的产物。减少SO2排放，减少含硫颗粒物，对于控制北京市的大气颗粒物浓度水平具有重要意义。  相似文献   

采用DPIV技术研究浅水平板岛屿尾流          下载免费PDF全文

梁东方  李玉樑  陈嘉范 《水科学进展》2004,15(6):711-716

人们对于尾流的研究大都针对绕流体在展向非常长的情形,但是在天然环境和水利工程中出现的多为水深相对很浅的流动。由于槽底和自由水面的限制,浅水域中的尾流有着与深水尾流不同的流动规律。采用数字粒子图像测速(DPIV)技术,在长30m、宽3.5m、高1m的水槽中比较系统地量测了浅水中绕平板岛屿的尾流区流场。分析了大尺度旋涡的运动规律,得到了尾流流动形式随尾流稳定性参数的变化规律。目前如此大尺度浅水岛屿尾流的定量实验研究并不多见。  相似文献   

洪山泉流量动态系统分析   总被引：1，自引：0，他引：1  

李静 《水文地质工程地质》2004,31(2):79-82

为查明洪山泉域的开采程度,在前人研究基础上,建立了现阶段泉流量-降雨量的线性模拟模型。通过对模型的系统辨识,对系统的"慢时变"现象作出了合理解释,并发现系统在1994年以后发生了"快时变",说明开采量从1995年开始迅猛增加。同时,由多年来泉流量序列的自相关分析,发现其宏观周期到2000年基本保持不变,说明虽然第二输入(即人为开采量)对该系统的作用已不可忽略,但尚未达到足以改变其宏观频率的程度。  相似文献   

夏季红枫湖地区农田土壤-大气界面汞交换通量的初步研究   总被引：11，自引：2，他引：11  

王少锋  冯新斌  仇广乐  付学吾 《矿物岩石地球化学通报》2004,23(1):19-23

采用动力学通量箱法(Dynamic Flux Chamber)与高时间分辨率大气测汞仪联用技术对贵州红枫湖地区土壤-大气界面间汞交换通量进行了初步研究.结果显示,红枫湖地区土壤-大气界面间汞交换通量变化范围为-8.6 ng～215.3 ng@m-2@h-1,平均27.4士40.1 ng/m2@h(n=255);且土壤与大气界面间的汞交换是双向的既有土壤汞的释放,又有大气汞的沉降,主要以土壤汞的释放为主(n释放=253,n沉降=2n).土壤汞的释放通量与土壤温度、气温、光照强度有强相关关系,相关系数分别为0.80、0.83、0.74.  相似文献   

Soil moisture potential and water content in the unsaturated zone within the arid Ejina Oasis in Northwest China   总被引：2，自引：0，他引：2  

X. Zhou  L. Wan  B. Fang  W. B. Cao  S. J. Wu  F. S. Hu  W. D. Feng 《Environmental Geology》2004,46(6-7):831-839

Three soil profiles were selected in the Ejina Oasis, northwest China, to determine water content profiles and evolution of soil moisture potentials in the unsaturated zone within the arid area. The total soil moisture potentials have been monitored for about 3 months in 2001 at different depths in the soil profiles. The occurrence and movement of water in the unsaturated zone was analyzed using the zero flux plane (ZFP) method. It is shown that convergent ZFPs and divergent ZFPs may occur at depths between 0.5 and 3.0 m, and that the depth of the ZFPs was controlled by the root zone of plants growing on the land surface. Profiles of the total soil moisture potentials were observed to be coincident with those of the water contents at the three experimental sites. The total soil moisture potential showed a slight increasing trend and the ZFPs tend to vanish from summer to winter as the water extraction by roots decreased. Evapotranspiration through vegetation has an important bearing on the water content and the total potential in the unsaturated zone.  相似文献   

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study   总被引：3，自引：0，他引：3  

Joanna E. Bullard  Grant H. McTainsh†  Christa Pudmenzky† 《Sedimentology》2004,51(5):1103-1125

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.  相似文献   

Improved Platinum-Group Element Extraction by NiS Fire Assay from Chromitite Ore Samples Using a Flux Containing Sodium Metaphosphate   总被引：1，自引：0，他引：1  

L. Paul Bédard  Sarah-Jane Barnes 《Geostandards and Geoanalytical Research》2004,28(2):311-316

Many chromite-rich rocks contain relatively high concentrations of the platinum-group elements (PGE). In many cases, the phases carrying PGE occur as either platinum-group minerals (PGM) or as base metal sulfides in solid solution in sulfides. In some cases, such as the UG-2 unit of the Bushveld Complex, the PGM are occluded inside chromite grains. Chromites are notably difficult to dissolve in most fluxes and if the chromite contains some PGM the possibility exists that not all the PGE will be recovered during fusion. In this work, shortcomings in published methods of analysis based on the nickel sulfide fire assay procedure were investigated and a new procedure developed based on the addition of sodium metaphosphate to the fusion mixture. Optimum composition of the fusion mixture was found to be 10 g sodium metaphosphate and 9 g silica to 10 g sample, 15 g sodium carbonate, 30 g lithium tetraborate, 7.5 g nickel and 4.5 g sulfur to achieve complete dissolution of chromite grains. The new flux mixture was evaluated by the analysis of reference material CHR-Pt+ (which is known to contain PGM inside chromite grains) and no undissolved chromite grains were found in the glassy slag. Analysis of the nickel sulfide beads from this fire assay using neutron activation analysis showed similar results for Rh and Ru when compared with published conventional true (or accepted) values, while Au, Ir, Os, Pd and Pt values determined here were 10 to 30% higher than the corresponding published conventional true values. It was concluded that the addition of sodium metaphosphate improved chromite dissolution in the flux and appears to improve PGE recovery.  相似文献   

Blast Induced Damage and Dynamic Behaviour of Hangingwalls in Bench Stoping     

E. Villaescusa  I. Onederra  C. Scott 《Fragblast: International Journal for Blasting and Fragmentation》2004,8(1):23-40

This paper presents the results of a comprehensive monitoring program designed to investigate the extent of blast induced damage experienced by rock masses extracted by bench stoping methods. An array of triaxial geophones and extensometers were used to monitor blast vibration attenuation and measure hangingwall deformations during stope extraction. In addition, pre and post surveys of the hangingwall rock mass were conducted using a TV borehole camera and cavity survey instrumentation. These surveys were later used to calibrate damage profiles into the stope hangingwalls.

Peak particle velocity, hangingwall deformation measurements and stope surveys were used to develop a site specific damage model that allowed engineers to asses drilling and blasting configurations to minimise the extent of pre-conditioning and damage. In addition the study included the analysis of the frequency response, displacements and accelerations experienced by the excavation as extraction and mine filling progressed. This work aimed at improving our understanding of the influence of blasting on the dynamic behaviour of stope hangingwalls.

The study demonstrated that estimates of the maximum extent of rock mass pre-conditioning and/or damage made through the application of the Holmberg-Persson approach compared well with measured results. In addition, the study found that dynamic loading imparted on an exposed hangingwall from subsequent stope blasting was also expected to contribute to rock mass weakening and that mine filling was crucial to arrest further deterioration. Hangingwall accelerations were used to demonstrate that larger openings may be more susceptible to dynamic loading.  相似文献   

Optimisation de la quantification des flux de matière en suspension d'un cours d'eau alpin : l'Isère à Grenoble (France)     

Dominique Dumas 《Comptes Rendus Geoscience》2004,336(13):1149-1159

This study seeks to determine suspended-matter flux of the Isère at Grenoble, one of the most important rivers of the northern French Alps. Since 1994, and especially 1996, systematic samplings of the left bank make it possible to follow in one point the variations of suspended particles and matter (SPM) of this river. But from a single measurement, sometimes not very representative of the whole observable concentrations within the section, it remains still difficult to estimate precisely the SPM flux. The results of this study show in particular the successive appearance of several turbidity gradients, whose occurrence is explained mainly by the hydrological and hydro-sedimentary dynamics of this river. The estimate of these gradients thus makes it possible to extrapolate specific measurements more easily and consequently to daily define the quantities of suspended matter exported by the Isère. Since 1996, the results show a very high flow, specific of the Isère at Grenoble, variable between 124 and more than 460 t km^?2 yr^?1. To cite this article: D. Dumas, C. R. Geoscience 336 (2004).  相似文献