球面离散网格与球体离散网格的比较研究   总被引：1，自引：0，他引：1  

王金鑫  禄丰年  陈杰 《测绘科学》2012,37(6):34-36

测地线在球体剖分中扮演着十分重要的角色,它保证了球体剖分网格单元的形体简单性和空间关系的一致性。本文基于对欧式空间和流空间的数学认识,探讨了球体剖分的评价标准,提出了基于大圆弧QTM的球体八叉树剖分方法,并指出作为一种大尺度的集成三维空间数据模型,全球三维离散网格是地理信息科学的一个新的发展方向。  相似文献   

基于GIS的江苏省劳动保障网格化维护系统建设     

陆敏燕  刘婵娟 《现代测绘》2012,35(3):48-49

摘要江苏省劳动保障网格化维护系统是以为网格化管理为指导,通过“3S”（GIS、GPS、RS）技术、计算机技术、网络技术、数据库等先进技术为支撑,实现基础地理数据编辑与维护、劳动保障监察网格化管理与维护、企事业单位标注模块的开发与应用,全面实现江苏省劳动保障监察网格化数据的信息化维护与管理。以创新监管方式为手段,为江苏省劳动保障网格化监察工作提供信息化决策依据,促进劳动保障事业的全面发展进步。  相似文献   

用有限区域风速场准确求解流函数和速度势场的方法   总被引：4，自引：1，他引：3  

朱宗申  朱国富  张林 《大气科学》2009,33(4):811-824

流函数和速度势是气象业务和研究中常用于表述风速的一组变量。用有限区域风速场, 使用有限差分方法求解得到的流函数和速度势场重建初始风速场, 由于受区域边界的限制往往有明显的偏差。虽然有许多求解方法的研究, 但是, 至今仍尚未见到一种真正准确的求解计算方案。首先, 介绍用Arakawa A网格和D网格分布的有限区域风速场求解流函数和速度势场的一般有限差分计算方法, 探讨用它们的解重建风速场产生误差的原因。然后, 针对这些原因, 对给定的有限区域, 通过线性外推初始风速场, 扩展求解计算区域, 使用协调、一致的有限差分格式方案, 准确计算求解区域的边界有旋风速、散度风速和速度势的定解边界条件, 以及恰当选择流函数、速度势、涡度和散度等变量的分布网格, 设计了用上述两种网格分布的风速场准确求解流函数、速度势场的方案, 并对其正确性加以证明, 它们可以推广应用于其他Arakawa网格。用实际资料试验同样显示, 方案避免了重建风速场误差的出现, 与初始风速场相比, 全场风速最大偏差精度达到10-12m/s或以上, 在计算机精度造成的计算误差影响范围内。本文的研究很好解决了长期以来用有限区域风速场、 使用有限差分方法无法准确求解流函数和速度势场的问题。  相似文献   

A 2D well-balanced,coupled model of water flow,sediment transport,and bed evolution based on unstructured grids with efficient variable storage strategy     

Zhiyuan Yue  Qingquan Liu  Wei Huang  Peng Hu  Zhixian Cao 《国际泥沙研究》2021,36(1):151-160

In recent decades,a few Godunov-type,finite volume two-dimensional(2D)unstructured grid,coupled flow,and sediment models(GF2DUCM)have been developed for flows over erodible beds.These kinds of models are generally analyzed as a Vertex Model(VM)that define topography at the cell vertex,which can lead to the non-conservation of mass regarding flow,sediment,and bed evolution.Here,a full cellcantered variable storage method(Central Model or CM)is applied as the solution of the GF2DUCM.In this method,terrain elevation is defined at the cell centroids;this accurately describes the physical relations between the water depth and topography deformation.This approach can fully eliminate calculation errors in topography deformation at local cells caused by the interpolation of topography deformation at the cell vertex,and reduced uncertainty in the computation of the GF2DUCM.The model performance is systematically tested using a series of laboratory experiments,which demonstrate the mass conservation feature and high accuracy in reproducing hydrodynamic and morphological processes.  相似文献   

基于环形扫面测量的三维直流电阻率法任意各向异性模型响应特征     

殷长春  杨志龙  刘云鹤  张博  齐彦福  曹晓月  邱长凯  蔡晶 《吉林大学学报(地球科学版)》2018,48(3):872-880

高精度地下任意各向异性介质电性分布特征识别是当前的热门研究课题。本文以国内外前人工作为基础,基于非结构化网格,利用基于梯度恢复的后验误差估计指导网格自适应细化过程,实现了直流电阻率法三维有限元数值模拟。通过与一维模型半解析解的对比,验证了本文算法的有效性。考虑到电各向异性介质在观测中存在视电阻率反常现象,本文采用了环形扫面测量方法。通过对几种典型各向异性模型的模拟分析,得到了相应的各向异性影响规律和识别特征,各向异性主轴电阻率之间的比值大小决定了椭圆型视电阻率极性曲线长轴与短轴的比值大小,主轴电阻率的旋转方向会改变视电阻率极性曲线的形状。本文的算法研究及数值模拟技术可为直流电法数据精细处理和解释提供技术支撑。  相似文献   

Solving the linearized forward-speed radiation problem using a high-order finite difference method on overlapping grids     

《Applied Ocean Research》2017

The linearized potential flow approximation for the forward speed radiation problem is solved in the time domain using a high-order finite difference method. The finite-difference discretization is developed on overlapping, curvilinear body-fitted grids. To ensure numerical stability, the convective derivatives in the free-surface boundary conditions are treated using an upwind-biased stencil. Instead of solving for the radiation impulse response functions, a pseudo-impulsive Gaussian type displacement is employed in order to tailor the frequency-content to the discrete spatial resolution. Frequency-domain results are then obtained from a Fourier transform of the force and motion signals. In order to make a robust Fourier transform, and capture the response around the critical frequency, the tail of the force signal is asymptotically extrapolated assuming a linear decay rate. Fourth-order convergence of the calculations on simple geometries is demonstrated, along with a nearly linear scaling of the solution effort with increasing grid resolution. The code is validated by comparison with analytical and semi-analytical solutions using submerged and floating closed-form geometries. Calculations are also made for a modern bulk carrier, and good agreement is found with experimental measurements.  相似文献   

非结构化网格下大范围波生流模拟和应用   总被引：1，自引：0，他引：1  

王平  张宁川 《海洋工程》2013,31(5):45-54

波浪破碎引起的沿岸流是近岸海域的关键水动力因素。利用基于缓坡方程得到的光程函数方程和波作用守恒方程建立了考虑绕射效应的大范围波浪传播模型,模型可以考虑流场的影响;将波浪模型计算得到的辐射应力、波浪紊动系数等参数添加到三维水动力模型中,得到大范围近岸波生流的计算模型。模型中流场和波浪可以共用计算网格,且可同步耦合计算;模型基于非结构化网格,可以拟合复杂岸线的变化。模型对波生沿岸流、环流和逆流进行了验证,同时对实际海域的波生流进行了计算,结果表明:该模型对近岸波浪破碎引起的波生流具有很好的精度和适用性,可用于实际工程的计算。  相似文献   

油藏数值模拟中地质模型的建模流程与方法     

张剑波  李谢清  石阳  朱建勃 《吉林大学学报(地球科学版)》2015,45(3):860-868

围绕油藏数值模拟过程中三维地质模型的建模技术进行了分析与探讨,详细介绍了基于角点网格模型的建模方法,给出了相应的实现步骤。其主要流程是:首先根据断层数据构造断层模型,在断层模型的基础上构建骨架模型;然后在骨架模型约束下采用地层恢复技术实现含断层的地层模型;最后基于结构模型插值物性参数完成属性模型。以塔河油田缝洞型油藏为例,对建模流程和技术的可行性进行验证,结果表明,其建模结果与专业地质建模软件Petrel相符。  相似文献   

顾及空间自相关的地理国情信息统计格网尺度选择——以植被覆盖信息统计为例   总被引：1，自引：0，他引：1  

连世忠  丁霖  陈江平 《测绘通报》2017,(3):46

统计格网尺度的不同会带来统计结果的差异,如何选择统计格网是地理国情信息统计的重要工作。本文提出了一种顾及空间自相关的地理国情信息统计格网尺度选择方法。采用地理国情普查数据,在50 m、60 m、70 m、80 m、90 m、100 m、250 m、500 m和1000 m几个尺度下,以植被覆盖信息统计为例,利用面积占优法和中心点归属法两种方法分别进行格网化,得到了不同尺度的植被格网数据;计算植被覆盖面积统计误差,分析不同尺度下植被覆盖信息的空间自相关的变化特征,并利用Moran’s I系数差值进行尺度选择,得到了植被覆盖信息统计格网的适宜尺度。以龙沙区和清涧县作为研究区域,结果表明,在地理国情植被覆盖信息统计时,不同地区的格网统计适宜尺度是不一样的,植被覆盖度中低的龙沙区的适宜尺度为100 m,而植被覆盖度高的清涧县的适宜尺度为250 m。  相似文献   

Higher-order compositional modeling with Fickian diffusion in unstructured and anisotropic media     

Joachim Moortgat  Abbas Firoozabadi 《Advances in water resources》2010

We present advances in compositional modeling of two-phase multi-component flow through highly complex porous media. Higher-order methods are used to approximate both mass transport and the velocity and pressure fields. We employ the Mixed Hybrid Finite Element (MHFE) method to simultaneously solve, to the same order, the pressure equation and Darcy's law for the velocity. The species balance equation is approximated by the discontinuous Galerkin (DG) approach, combined with a slope limiter. In this work we present an improved DG scheme where phase splitting is analyzed at all element vertices in the two-phase regions, rather than only as element averages. This approximation is higher-order than the commonly employed finite volume method and earlier DG approximations. The method reduces numerical dispersion, allowing for an accurate capture of shock fronts and lower dependence on mesh quality and orientation. Further new features are the extension to unstructured grids and support for arbitrary permeability tensors (allowing for both scalar heterogeneity, and shear anisotropy). The most important advancement in this work is the self-consistent modeling of two-phase multi-component Fickian diffusion. We present several numerical examples to illustrate the powerful features of our combined MHFE–dg method with respect to lower-order calculations, ranging from simple two component fluids to more challenging real problems regarding CO₂ injection into a vertical domain saturated with a multi-component petroleum fluid.  相似文献