郯庐断裂带张八岭隆起南段花岗岩LA-ICP MS锆石U-Pb年龄及其构造意义   总被引：10，自引：8，他引：2  

牛漫兰  朱光  谢成龙  柳小明  曹洋  谢文雅 《岩石学报》2008,24(8)

本文利用LA-ICP MS方法,对零星分布于郯庐断裂带张八岭隆起南段肥东-巢湖地区的一些花岗岩体进行了锆石U-Pb同位素年代学研究.结果表明,西徐村北岩体、尖山岩体、西花村岩体、永丰岩体和锦张村岩体的形成年龄分别为126.9 ±1.0Ma、114.8±1.3Ma、108.1 ±1.6Ma、103.0 ±0.9Ma和120.3 ±0.7Ma,这些花岗岩体均形成于早白垩世,但侵位时间有一定差异.与郯庐断裂带西侧的鲁西、徐淮、蚌埠地区同时代克拉通内部侵入岩相比,断裂带内岩浆活动持续的时间更长(～27Ma).这一结果不但指示郯庐断裂带上的岩浆活动是不均一的,各地岩浆在活动的强烈程度和时间特征上均有很大的差异,而且显示了断裂带内比克拉通内部岩浆活动结束时间较晚,暗示其下岩石圈可能有更为强烈的减薄程度和更长的减薄历史.  相似文献   

青藏高原西北缘祁漫塔格山中新世快速抬升的磷灰石裂变径迹证据   总被引：2，自引：0，他引：2  

拜永山  任二峰  范桂兰  许长青 《中国区域地质》2008,(7):1044-1048

对祁漫塔格山体不同海拔高度所取的9个磷灰石样品的裂变径迹分析结果表明,东昆仑西段中新世早中期为主要的隆升期且隆升速率较高,早期隆升速率为111m／Ma,晚期隆升速率为98m／Ma,总体隆升速率为100m／Ma。样品显示出磷灰石裂变径迹长度大致分2类,一类磷灰石裂变径迹长度为（12．21±10．20）-（13．75±0．30）μm,径迹长度分布图基本上为窄而对称的正态分布,反映具有快的剥露冷却速率,未受到后期热事件的干扰。另一类磷灰石裂变径迹长度为（11．88±0．33）～（13．32±0．27）μm,较前一类具有稍慢的剥露冷却速率,并且受到了后期热事件的干扰。  相似文献   

浙江西沪港重金属铜的配位容量和形态分析   总被引：3，自引：2，他引：3       下载免费PDF全文

吕海燕  王正方  傅和芳  冯旭文 《海洋学报》2003,25(3):47-52

根据2000年6月10～14日在浙江省西沪港采集的海水样品,利用AA-800石墨炉原子吸收分光光度技术和阳极溶出伏安法测定样品中重金属铜的含量,获得铜在海水中受不同的有机配体控制.不同粒级的铜表观配位容量表明西沪港海水过孔径1.00μm微孔膜的(ACuCC)较高,为144.4nmol/dm3;过0.40和0.20μm滤膜的(ACuCC)分别为103.0和102nmol/dm3;铜的有机配体条件稳定常数的对数值在7.25～9.14之间.铜的总量为21.72nmol/dm3.铜全部为稳定溶解态,其中pH2酸溶态占95.0%,强有机结合态占5.0%.溶解态铜中有机结合态占过滤海水中总铜的61.6%.  相似文献   

珠江口水体中铜与悬浮颗粒物相互作用的研究     

丘耀文  王肇鼎  张正斌  刘莲生 《热带海洋学报》1995,(4)

使用无机离子交换法研究珠江口水体中铜与悬浮颗粒物的相互作用，测出钢与悬浮颗粒物相互作用的ｐＨ曲线呈Ｓ形，其分级离子交换等温线是一种新的“台阶”型；从分级离子交换理论求得分级平衡常数Ｋ１为５．０，Ｋ２为７８．１，珠江口水体中铜的表观络合容量为０．９２μｍ及其条件稳定常数为３．５×１０７。  相似文献   

Behavior of Pile Groups under Lateral Load   总被引：2，自引：0，他引：2  

Yang Keji  Li Qixin Wang Fuyuan Associate Proferssor  Hehai University  Nanjing Engineer  Hehai University  Nanjing 《中国海洋工程》1991,(2)

Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads.  相似文献   

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil     

Yu Xiaodong  Yan Shuwang Sun Wanhe Postgraduate Student  Tianjin University  Tianjin Professor  Tianjin University  Tianjin Senior Engineer  Tianjin Port Engineering Institute  Tianjin 《中国海洋工程》1997,(2)

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.  相似文献   

透空式水平板波浪上托力分布   总被引：9，自引：3，他引：9  

周益人陈国平  黄海龙王登婷 《海洋工程》2003,21(4):41-47

通过系列模型试验，对波浪上托力沿板宽分布进行了详细分析，提出对于透空式平板结构，发生较大冲击压强或上托力的分布主要分为均布型和局部冲击型两类，由此得到压强分布的计算公式。大量试验资料表明，该公式与实验值有着较好的一致性。  相似文献   

东山湾贝类养殖容量的估算   总被引：6，自引：0，他引：6  

卢振彬  杜琦  钱小明  方民杰  蔡清海  许翠娅 《台湾海峡》2001,20(4):462-470

以初级生产力为基础，应用营养动态模式和沿岸海域能流分析模型，估算东山湾贝类年生产量分别为269331t和295767t，平均282549t。扣除潮间带、潮下带和吊养区浮筏、随着基及延绳上附着的非养殖滤食性附着动物自然现存量35760t，贝类可养殖量为246789t。应用统计分析和逻辑斯谛种群增长模型估计贝类可养面积为11839hm^2，其中缢蛏635hm^2，石蛎1160hm^2,吊蛎1525hm^2，翡翠贻贝633hm^2，菲律宾蛤仔1154hm^2，扇贝698hm^2，江瑶248hm^2，泥蚶601hm^2，巴非蛤4151hm^2，凸壳肌蛤1034hm^2。1998年实际养殖面积和养殖产量分别为10581hm^2和220564t。尚有1258hm^2,26225t的扩大开发潜力。文中还讨论了合理布局和优化养殖结构问题。  相似文献   

Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay     

S. P. Singh  D. P. Tripathy  S. V. Ramaswamy 《Marine Georesources & Geotechnology》2007,25(3):237-249

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.  相似文献   

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system     

Shah Neyamat Ullah  Yuxia Hu 《Marine Georesources & Geotechnology》2020,38(9):1121-1127

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.  相似文献