激光剥蚀等离子体质谱分析中激光剥蚀参数对信号响应的影响   总被引：5，自引：1，他引：5  

徐鸿志靳兰兰  李爱荣帅琴 胡圣虹 《岩矿测试》2005,24(3):171-175

探讨了激光剥蚀等离子体质谱固体微区分析中激光剥蚀参数对元素分析信号灵敏度及稳定性的影响。这些参数包括激光功率、脉冲频率、剥蚀孔经、散焦距离、剥蚀方式等。讨论了优化的激光剥蚀等离子体质谱信号采集及数据处理方式。在全质量范围内选用具有代表性的元素作为研究对象,建立了激光剥蚀的一般性特征规律和266nm紫外激光系统的最佳操作条件。在选定的激光剥蚀参数下,大多数被测元素的检出限为22.8~457ng/g,能够满足固体微区分析的要求。  相似文献   

World-wide synthetic tide parameters for gravity and vertical and horizontal displacements   总被引：3，自引：0，他引：3  

K.H. Zahran  G. Jentzsch  G. Seeber 《Journal of Geodesy》2005,79(6-7):293-299

The response of the Earth’s crust to the direct effect of lunisolar gravitational forcing is known as the body tide. The body tide is superimposed by surface-loading forces due to the pressure of the periodically varying ocean tide acting on the Earth, called ocean tide loading (OTL). Both body tide and OTL can be decomposed into components of the same frequency known as tidal parameters. However, OTL is more complicated than body tides because of the dynamic effects of the ocean. Estimating OTL requires a model of the ocean tides and knowledge of the elastic properties of the solid Earth. Thus, synthetic tide parameters (amplitude factors and phase leads) have been developed here on a world-wide grid for gravity and positional displacements. The body tide contributions were added to the oceanic contribution to provide the Earth tide response. The accuracy and reliability of the synthetic tidal parameters have been estimated by comparing observed gravity and vertical-displacement tide parameters with those interpolated from our synthetic model, which shows good agreement. Tests also indicate that the synthetic tide parameters provide realistic gravimetric and displacements for practical use in tidal prediction.  相似文献   

大气污染物SO_x输送方程的尺度分析   总被引：5，自引：1，他引：5  

程新金  黄美元  安峻岭  王自发  徐华英  周玲  肖辉 《气象学报》2002,60(4):468-476

文中用量纲分析方法分析了控制大气污染物输送方程的动力学特性。提出了 6种反映大气污染物输送过程中各种动力、物理和化学过程相对重要性的动力学参数。并以硫氧化物为例进行了各参数量级大小分析 ,尤其对 3种起汇作用 (去除机理 )的机理 (化学转化、干沉降和湿清除 )在不同尺度大气污染过程中的作用进行了详细分析。结果表明 :在一般情况下 ,SO2 的气相化学作用小于干沉降和湿清除的作用 ;干沉降作用很依赖于模式最底层厚度的选取 ;在有降雨时湿清除作用一般较大。文中还对大气污染物SOx 输送方程各项特征量的量级作了分析对比 ,得出了控制不同尺度大气污染物输送过程的零级近似方程和一级近似方程 ,并指出了这些方程的基本特征  相似文献   

The effect of rock moisture on Schmidt hammer rebound: tests on rock samples from Marion Island and South Africa     

Paul Sumner  Werner Nel 《地球表面变化过程与地形》2002,27(10):1137-1142

In an assessment of the influence of internal rock moisture content on Schmidt hammer readings, rebound (R) values are found to decrease with increasing moisture content. For samples of basalt, sandstone and dolerite the maximum decrease in R‐values is found between oven dry values and saturated rock rebound values, the magnitude of which varies from 2 to 10 points on the R‐scale. A quartzite block has the greatest decline of 6 points at 60 per cent saturation. For certain rock types under differing site‐to‐site field moisture conditions the moisture effect can be a significant factor in the interpretation of the relative state of weathering from rebound values. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Optimum multiple tuned mass dampers for structures under the ground acceleration based on DDMF and ADMF     

Chunxiang Li 《地震工程与结构动力学》2002,31(4):897-919

Multiple tuned mass dampers (MTMD) consisting of many tuned mass dampers (TMDs) with a uniform distribution of natural frequencies are taken into consideration for attenuating undesirable vibration of a structure under the ground acceleration. A study is conducted to search for the preferable MTMD which performs better and is easily manufactured from the five available models (i.e. MTMD‐1 – MTMD‐5), which comprise various combinations of the stiffness, mass, damping coefficient and damping ratio in the MTMD. The major objective of the present study then is to evaluate and compare the control performance of these five models. The structure is represented by its mode‐generalized system in the specific vibration mode being controlled by adopting the mode reduced‐order approach. The optimum parameters of the MTMD‐1 – MTMD‐5 are investigated to reveal the influence of the important parameters on their effectiveness and robustness using a numerical searching technique. The parameters include the frequency spacing, average damping ratio, tuning frequency ratio, mass ratio and total number. The criteria selected for the optimum searching are the minimization of the maximum value of the displacement dynamic magnification factor (DDMF) and that of the acceleration dynamic magnification factor (ADMF) of the structure with the MTMD‐1 – MTMD‐5 (i.e. Min.Max.DDMF and Min.Max.ADMF). It is demonstrated that the optimum MTMD‐1 and MTMD‐4 yield approximately the same control performance, and offer higher effectiveness and robustness than the optimum MTMD‐2, MTMD‐3, and MTMD‐5 in reducing the displacement and acceleration responses of structures. It is further demonstrated that for both the best effectiveness and robustness and the simplest manufacturing, it is preferable to select the optimum MTMD‐1. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Numerical evaluation of the damping‐solvent extraction method in the frequency domain     

Ushnish Basu  Anil K. Chopra 《地震工程与结构动力学》2002,31(6):1231-1250

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

X射线衍射峰五基本要素的物理学意义与应用   总被引：6，自引：0，他引：6  

周健  王河锦 《矿物学报》2002,22(2):95-100

本文根据Bragg衍射方程、Scherrer方程、衍射强度计算原理，研究讨论了X射线衍射5构成要素中的衍射峰位置、衍射峰宽度、衍射峰高度的物理学意义。根据实验研究证明了衍射峰不对称性的几何条件特征，并用地质事实验证了衍射形态变化与晶格应变和粒度大小的内在联系。从而阐明了单个衍射峰5基本构成要素的完整物理学意义，并以实例论证了5要素的实际应用价值。  相似文献   

碳酸盐岩差异性风化成土特征及其对石漠化形成的影响   总被引：35，自引：0，他引：35  

孙承兴  王世杰  周德全  李瑞玲  李艳丽 《矿物学报》2002,22(4):308-314

碳酸盐岩极低的酸不溶物含量使岩石风化产生的残积土壤物质数量极少，并产生巨大的体积缩小，促使早期形成的残积土在重力作用下不断向下塌陷。显著的差异性风化使基岩面强烈起伏，甚至形成大量的岩溶尘洼地、裂隙、地下管道、洞穴系统等。在重力和水的作用下，土粒沿垂直和水平方向上经微距离或短距离搬运到上述低洼或地下空间中，甚至由地下河带到更远的地方，这是碳酸盐岩地区土壤丢失的重要方式，也是形成石漠化最主要的地质因素。土壤在地表分布高度不均匀，是碳酸盐岩地区的地表少土的重要原因。对于酸不溶物含量相当的石灰岩和白云岩而言，由于白云岩的差异性风化明显弱于石灰岩，以及受各种应力作用后，白云岩形成的节理及裂隙密集而均匀，从而提高了近地表白云岩的含水能力，延长了风化过程中的水－岩反应时间，使风化作用可以相对集中于地表或近地表进行，有利于岩石的整体风化作用的进行，同时使白云岩风化壳基岩面起伏相对较小，风化残积形成的土壤分布也相对均匀。因此，白云岩区地表土层较厚，石漠化程度也稍弱于灰岩区。  相似文献   

ELF propagation parameters for uniform models of the Earth–ionosphere waveguide     

Vadim C. Mushtak  Earle R. Williams 《Journal of Atmospheric and Solar》2002,64(18)

Uniform models for the Earth–ionosphere cavity are considered with particular attention to the physical properties of the ionosphere for the extremely low frequency (ELF) range. Two consistent features have long been recognized for the range: the presence of two distinct altitude layers of maximum energy dissipation within the lower ionosphere, and a “knee”-like change in the vertical conductivity profile representing a transition in dominance from ion-dominated to electron-dominated conductivity. A simplified two-exponential version of the Greifinger and Greifinger (1978) technique widely used in ELF work identifies two slopes in the conductivity profile and, providing accurate results in the ELF communication band (45–75 Hz), simulates too flat a frequency dependence of the quality factor within the Schumann resonance frequency range (5–40 Hz). The problem is traced to the upward migration, with frequency increasing, of the lower dissipation layer through the “knee” region resulting in a pronounced decrease of the effective scale height for conductivity. To overcome this shortcoming of the two-exponential approximation and still retain valuable model analyticity, a more general approach (but still based on the Greifinger and Greifinger formalism) is presented in the form of a “knee” model whose predictions for the modal frequencies, the wave phase velocities and the quality factors reasonably represent observations in the Schumann resonance frequency range.  相似文献   

大型维歇特地震仪的记录特征及其在地震速报中的作用     

唐兆华  陈运泰 《地震地磁观测与研究》2002,23(5):1-5

大型维歇特地震仪自德国引进南京地震台已近70年。本文简要叙述了该仪器的性能；并以南京地震台的大型维歇特地震仪的记录为例，介绍了该仪器在300-2000km范围内的记录特征，回顾了该仪器在地震速报中所起的历史作用。  相似文献