铅橡胶复合阻尼器的性能试验研究   总被引：4，自引：0，他引：4  

刘冰  周云  邓雪松  徐赵东 《地震工程与工程振动》2002,22(5):105-114

介绍作者提出的铅橡胶复合阻尼器的构造与耗能原理，通过不同形状，不同大小铅心的8个铅橡胶复合阻尼器的循环荷载试验，研究了频率、应变幅值、循环次数、铅芯直径、竖向压力等对铅橡胶复合阻尼器的影响规律。研究结果表明，铅橡胶复合阻尼器工作性能稳定，耗能性能和抗疲劳性能好。  相似文献   

Response of the cladoceran community to trophic state change in Lake Apopka, Florida     

Byron C. Shumate  Claire L. Schelske  Thomas L. Crisman  William F. Kenney 《Journal of Paleolimnology》2002,27(1):71-77

A paleolimnological evaluation of cladoceran microfossils was initiated to study limnological changes in Lake Apopka, a large (125 km²), shallow (mean depth = 1.6 m), warm, polymictic lake in central Florida. The lake switched from macrophyte to algal dominance in the late 1940s, creating a Sediment Discontinuity Layer (SDL) that can be visually used to separate sediments derived from macrophytes and phytoplankton. Cladoceran microfossils were enumerated as a means of corroborating extant eutrophication data from the sediment record. Inferences about the timing and trajectory of eutrophication were made using the cladoceran-based paleo-reconstruction. The cladoceran community of Lake Apopka began to change abruptly in both total abundance and relative percent abundance just before the lake shifted from macrophyte to algal dominance. Alona affinis, a mud-vegetation associated cladoceran, disappeared before the SDL was formed. Planktonic and benthic species also began to increase below the SDL, indicating an increase in production of both planktonic and benthic species. Chydorus cf. sphaericus, an indicator of nutrient loading, increased relative to all other cladocerans beginning in the layer below the SDL and continuing upcore. Changes in the transitional sediment layer formed before the lake switched to phytoplankton dominance, including an increase in total phosphorus concentration, suggest a more gradual eutrophication process than previously reported. Data from this study supported conclusions from other paleolimnological studies that suggested anthropogenic phosphorus loading was the key factor in the hypereutrophication of Lake Apopka.  相似文献   

Exploring some relationships between biological soil crusts, soil aggregation and wind erosion   总被引：5，自引：0，他引：5  

David J. Eldridge  John F. Leys 《Journal of Arid Environments》2003,53(4):457-466

A portable wind tunnel was used to test the contribution of biological and physical elements to overall soil aggregation on a soil dominated by biological soil crusts in south-eastern Australia. After moderate disturbance and simulated wind erosion, 90% of surface aggregates on the loamy soil and 76% on the sandy soil were dominated by biological elements (cryptogams). Lower levels of biological bonding were observed on the severely disturbed treatment. Linear regression indicated a significant positive relationship (r²=0·72) between biological soil crust cover and dry aggregation levels greater than 0·85mm. To maintain sediment transport below an erosion control target of 5gm⁻¹s⁻¹ for a 65kmh⁻¹ wind at 10m height, a crust cover of approximately 20% is required. When a multiple regression model which sequentially fitted biological crust cover and dry aggregation greater than 0·85mm was applied to the data, dry aggregation accounted for more of the variation in sediment transport rate than biological crust cover. These data were used to develop a conceptual model which integrates crust cover and dry aggregation, and provides a useful framework within which to predict the likely impacts of changes in soil crust cover and aggregation.  相似文献   

热害矿井巷道温度场分布规律研究   总被引：8，自引：0，他引：8  

张树光  孙树魁  张向东  薛强 《中国地质灾害与防治学报》2003,14(3):9-11

为解决深部开采带来的热害问题，基于地质学和热力学理论，建立了热害矿井巷道温度场的数学模型，研究了巷道内部温度场随埋深和通风热速的变化规律。计算结果表明，巷道温度场对埋深的敏感度要高于风速、温度随埋深的增加而呈阶段性递增。控制入口温度是解决矿井热害的关键。以上结论为矿井热害的综合治理提供了重要依据。  相似文献   

A critical state interpretation for the cyclic liquefaction resistance of silty sands   总被引：1，自引：0，他引：1  

George D. Bouckovalas  Konstantinos I. Andrianopoulos  Achilleas G. Papadimitriou 《Soil Dynamics and Earthquake Engineering》2003,23(2):115-125

Contrary to many laboratory investigations, common empirical correlations from in situ tests consider that the increase in the percentage of fines leads to an increase of the cyclic liquefaction resistance of sands. This paper draws upon the integrated Critical State Soil Mechanics framework in order to study this seemingly not univocal effect. Firstly the effect of fines on the Critical State Line (CSL) is studied through a statistical analysis of a large data set of published monotonic triaxial tests. The results show that increasing the content of non-plastic fines practically leads to a clockwise rotation of the CSL in (e–ln p) space. The implication of this effect on cyclic liquefaction resistance is subsequently evaluated with the aid of a properly calibrated critical state elasto-plastic constitutive model, as well as a large number of published experimental results and in situ empirical correlations. Both sets of data show clearly that a fines content, less than about 30% by weight, may prove beneficial at relatively small effective stresses (p₀<50–70 kPa), such as the in situ stresses prevailing in most liquefaction case studies, and detrimental at larger confining stresses, i.e. the stresses usually considered in laboratory tests. To the extent of these findings, a correction factor is proposed for the practical evaluation of liquefaction resistance in terms of the fines content and the mean effective confining stress.  相似文献   

地震荷载作用下温度和围压对冻土强度影响的试验研究   总被引：6，自引：4，他引：6  

吴志坚  马巍  王兰民  程建君  冯文杰 《冰川冻土》2003,25(6):648-652

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。  相似文献   

Recent ventifact development on the central Oregon coast,western USA     

Jasper Knight  Helene Burningham 《地球表面变化过程与地形》2003,28(1):87-98

The unusual location of ventifacts, on a boulder‐built jetty at the mouth of the Siuslaw River, Oregon coast, western USA, allows ventifact age and wind abrasion rates to be estimated with some precision. The jetty was built mainly between 1892–1901 and extended throughout the twentieth century. Consideration of historical shoreline position and the history of jetty construction and repair suggests the ventifacts have formed since about 1930. Morphologically the ventifacts are aligned south‐to‐north reflecting winter winds and sediment transport from the adjacent beach. Wind‐parallel grooves and ridges with sharp, sinuous crests are developed on inclined boulder surfaces on top of the jetty and reflect suspended sand transport in wind vortices. Deeply pitted surfaces on steep boulder surfaces nearest the beach reflect impact by saltating sand grains. Based on present wind regimes (1992–2000) from three regional weather stations, southerly winds above the sand transport threshold occur for 21·9–29·6 per cent of the time. Based on estimated depth of loss from boulder surfaces, wind abrasion rates are calculated to be on the order of 0·24–1·63 mm a^?1. This is the first well‐constrained field estimate of ventifact age and ventifaction rate from a modern coastal environment. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel     

Ian J. Walker  William G. Nickling 《地球表面变化过程与地形》2003,28(10):1111-1124

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

软粘土层上的油罐差异沉降     

徐光明  王铁儒  易进栋 《岩土力学》2003,(Z2)

根据某一大型油罐软基加固处理工程方案设计和优选需要,按照离心模型相似律,开展了三组模型试验,分别模拟了天然地基、土工合成材料袋装碎石垫层和既在填土层中设置袋装碎石垫层又在淤泥质粘土层设置土工合成材料排水板三种情况,以研究这一加固布置形式对减小高压缩性软土层地基上油罐罐底的差异沉降效果反应。模型油罐地基采用原型土重塑制备,现场土工合成材料袋装碎石采用柔性机织玻璃纤维细管塞装粗砂条模拟,并在不停机运转条件下模拟了多次充放水预压加载。试验结果表明,油罐软弱地基经土工合成材料袋装碎石加固后,罐底总沉降值和差异沉降值均明显小于天然地基情形下对应的沉降值,罐底畸变得到显著减小,就本文所述的土质条件、土层厚度和预压荷载强度,地基经加固处理后,油罐罐底畸变减小了近50 %。最后就土工合成材料在加固油罐地基布置形式的合理性进行了初步探讨。  相似文献   

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map     

JiangWenping XiDaping 《中国地质大学学报(英文版)》2003,14(4):374-380

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.  相似文献