利用激光强度信息分类激光扫描测高数据   总被引：21，自引：0，他引：21  

刘经南  张小红 《武汉大学学报(信息科学版)》2005,30(3):189-193

三维机载激光扫描测高数据中不仅含有每个激光脚点的位置和高程信息，而且越来越多的系统同时能提供激光脚点回波信号的强度信息。不同反射面介质对激光信号的反射特性不一样．用实测的数据对激光回波信号的强度信息进行统计标定，并基于标定结果．实现了联合激光强度信息和高程信息进行分类的算法．获得了较为满意的结果。  相似文献   

中国深空测控网建立方案的研究     

魏二虎  刘经南  黄劲松 《武汉大学学报(信息科学版)》2005,30(7):592-596

概述了深空测控网的基本技术要求,总结了我国卫星测控网和国内现有射电观测设施的技术、组成和分布,分析和论述了将我国现有的测控设施建设成深空测控网的具体方案。  相似文献   

Practical Research of IKONOS-2 Geopositioning and Its Accuracy in Tibet of China     

CHENChujiang LIDeren ZHUQing 《地球空间信息科学学报》2005,8(1):33-38

This paper presents the studies of the refining of IKONOS-2 RPC, the transform of the datum, the mode of the control point distribution and the method of IKONOS stereo triangulation, so that IKONOS imagery can be used to collect the precise geospatial data and produce the large scale map. The transform between the IKONOS-2 image space and the national coordinate system based on the RPC have been developed, and the results of block adjustment with various control schemes in a practical project near Himalayas have been examined and analysed. The encouraging results of high positioning accuracy have been obtained.  相似文献   

激光剥蚀等离子体质谱分析中激光剥蚀参数对信号响应的影响   总被引：5，自引：1，他引：5  

徐鸿志靳兰兰  李爱荣帅琴 胡圣虹 《岩矿测试》2005,24(3):171-175

探讨了激光剥蚀等离子体质谱固体微区分析中激光剥蚀参数对元素分析信号灵敏度及稳定性的影响。这些参数包括激光功率、脉冲频率、剥蚀孔经、散焦距离、剥蚀方式等。讨论了优化的激光剥蚀等离子体质谱信号采集及数据处理方式。在全质量范围内选用具有代表性的元素作为研究对象,建立了激光剥蚀的一般性特征规律和266nm紫外激光系统的最佳操作条件。在选定的激光剥蚀参数下,大多数被测元素的检出限为22.8~457ng/g,能够满足固体微区分析的要求。  相似文献   

"嫦娥"卫星绕月飞行轨道的激光测定法     

刘基余 《武汉大学学报(信息科学版)》2005,30(10):870-872,880

依据地月激光测距的成功实践和对卫星激光定轨的基础研究,提出了用地面对嫦娥卫星作激光测距的方法,高精度地测定嫦娥卫星绕月飞行时的实时在轨位置,论述了多站激光定轨和单站激光定轨的解算数模。  相似文献   

Outlier detection algorithms and their performance in GOCE gravity field processing   总被引：2，自引：0，他引：2  

M. Kern  T. Preimesberger  M. Allesch  R. Pail  J. Bouman  R. Koop 《Journal of Geodesy》2005,78(9):509-519

The satellite missions CHAMP, GRACE, and GOCE mark the beginning of a new era in gravity field determination and modeling. They provide unique models of the global stationary gravity field and its variation in time. Due to inevitable measurement errors, sophisticated pre-processing steps have to be applied before further use of the satellite measurements. In the framework of the GOCE mission, this includes outlier detection, absolute calibration and validation of the SGG (satellite gravity gradiometry) measurements, and removal of temporal effects. In general, outliers are defined as observations that appear to be inconsistent with the remainder of the data set. One goal is to evaluate the effect of additive, innovative and bulk outliers on the estimates of the spherical harmonic coefficients. It can be shown that even a small number of undetected outliers (<0.2 of all data points) can have an adverse effect on the coefficient estimates. Consequently, concepts for the identification and removal of outliers have to be developed. Novel outlier detection algorithms are derived and statistical methods are presented that may be used for this purpose. The methods aim at high outlier identification rates as well as small failure rates. A combined algorithm, based on wavelets and a statistical method, shows best performance with an identification rate of about 99%. To further reduce the influence of undetected outliers, an outlier detection algorithm is implemented inside the gravity field solver (the Quick-Look Gravity Field Analysis tool was used). This results in spherical harmonic coefficient estimates that are of similar quality to those obtained without outliers in the input data.  相似文献   

Quality Assessment Of Digital Surface Models Generated From IKONOS Imagery     

Joanne  Poon  Clive S.  Fraser  Zhang  Chunsun  Zhang  Li  Armin  Gruen 《The Photogrammetric Record》2005,20(110):162-171

The growing applications of digital surface models (DSMs) for object detection, segmentation and representation of terrestrial landscapes have provided impetus for further automation of 3D spatial information extraction processes. While new technologies such as lidar are available for almost instant DSM generation, the use of stereoscopic high-resolution satellite imagery (HRSI), coupled with image matching, affords cost-effective measurement of surface topography over large coverage areas. This investigation explores the potential of IKONOS Geo stereo imagery for producing DSMs using an alternative sensor orientation model, namely bias-corrected rational polynomial coefficients (RPCs), and a hybrid image-matching algorithm. To serve both as a reference surface and a basis for comparison, a lidar DSM was employed in the Hobart testfield, a region of differing terrain types and slope. In order to take topographic variation within the modelled surface into account, the lidar strip was divided into separate sub-areas representing differing land cover types. It is shown that over topographically diverse areas, heighting accuracy to better than 3 pixels can be readily achieved. Results improve markedly in feature-rich open and relatively flat terrain, with sub-pixel accuracy being achieved at check points surveyed using the global positioning system (GPS). This assessment demonstrates that the outlook for DSM generation from HRSI is very promising.  相似文献   

Combined Digital Photogrammetry and Time-of-Flight Laser Scanning for Monitoring Cliff Evolution   总被引：4，自引：0，他引：4  

Michael  Lim  David N.  Petley  Nicholas J.  Rosser  Robert J.  Allison  Antony J.  Long  David  Pybus 《The Photogrammetric Record》2005,20(110):109-129

Although cliffs form approximately 75% of the world's coastline, the understanding of the processes through which they evolve remains limited because of a lack of quantitative data on the morphological changes they undergo. In this paper the combination of terrestrial time-of-flight laser scanning with high-resolution digital photogrammetry is examined to generate high-quality data-sets pertaining to the geomorphic processes governing cliff development. The study was undertaken on a section of hard rock cliffs in North Yorkshire, UK, which has been monitored over a 12-month period. High-density, laser-scanned point clouds have been used to produce an accurate representation of these complex surfaces, free from the optical variations that degrade photographic data. These data-sets have been combined with high-resolution photographic monitoring, resampled with the fixed accuracies of the terrestrial laser survey, to generate a new approach to recording the volumetric changes in complex coastal cliffs. This has led to significant improvements in the understanding of the activity patterns of coastal cliffs.  相似文献   

Spectral Filtering and Classification of Terrestrial Laser Scanner Point Clouds   总被引：1，自引：0，他引：1  

Derek D.  Lichti 《The Photogrammetric Record》2005,20(111):218-240

A method is presented for filtering and classification of terrestrial laser scanner point clouds. The algorithm exploits the four-channel (blue, green, red and near infrared) multispectral imaging capability of some terrestrial scanners using supervised, parametric classification to assign thematic class labels to all scan cloud points. Its principal advantage is that it is a completely data-driven algorithm and is independent of spatial sampling resolution since the processing is performed in four-dimensional spectral feature space. Its application to two data-sets of different spatial extent and spatial and spectral complexity is reported, for which respective overall classification accuracies of 87·0% and 82·0% were achieved. Analysis of the input data with emphasis on the characteristics pertinent to the anticipated outcomes precedes detailed analysis of the classification results and error sources and their causes. Erroneously classified points are attributed to radiometric errors stemming from both detector hardware and physical effects.  相似文献   

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry   总被引：1，自引：0，他引：1  

Clive S.  Fraser  Alex  Woods  Danny  Brizzi 《The Photogrammetric Record》2005,20(111):205-217

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.  相似文献