Calibration of cyclic constitutive models by oscillating functions     

Muyiwa Ebenezer Alalade  Binod Kafle  Frank Wuttke  Tom Lahmer 《Geomechanics and Geoengineering》2018,13(2):146-157

Most structures are subjected to more cyclic loads during their life time than static loads. These cyclic action could be a result of either natural or man-made activities and may lead to soil failure. In order to understand the response of the foundation and its interaction with these complex cyclic loadings, various researchers have over the years developed different constitutive models. Although a lot of research is being carried out on these relatively new models, little or no details exist in literature about the model-based identification of the cyclic constitutive parameters which to a large extent govern the quality of the model output. This could be attributed to the difficulties and complexities of the inverse modeling of such complex phenomena. A variety of optimisation strategies are available for the solution of the sum of least-squares problems as usually done in the field of model calibration. However, for the back analysis (calibration) of the soil response to oscillatory load functions, this article gives insight into the model calibration challenges and also puts forward a method for the inverse modeling of cyclic loaded foundation response such that high-quality solutions are obtained with minimum computational effort.  相似文献   

Probabilistic calibration of a coupled hydro-mechanical slope stability model with integration of multiple observations     

Lulu Zhang  Fang Wu  Yafei Zheng  Lihong Chen  Jie Zhang  Xu Li 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2018,12(3):169-182

Multiple types of responses, such as displacements, ground water level, pore water pressures, water contents, etc., are usually measured in comprehensive monitoring programmes for rainfall-induced landslide prevention. In this study, a probabilistic calibration method for coupled hydro-mechanical modelling of slope stability is presented with integration of multiple types of measurements. A numerical example of a soil slope under rainfall infiltration is illustrated to compare the effects of single and multiple types of responses on parameter estimation and model calibration. The results show that the soil parameters can be estimated with less uncertainty and total uncertainty bounds are narrower with multiple types of responses than with a single type of response. Model calibration based on multiple types of responses can compromise different responses and hence the means and standard deviations of model error are the smallest. A feasible correlation coefficient between soil modulus and permeability can be obtained from model calibration with multiple types of responses and single type of response as long as the responses include displacement data.  相似文献   

气象卫星接收天线标校技术及应用     

张作君  王健  张小雪  吕明佳  杨蕾 《气象科技》2019,47(3):380-385

在过去的几十年中,我国气象事业的不断发展,中国风云气象卫星完成了从试验应用型向业务服务性的不断转型,因此对于卫星信号接收天线的可靠性和指向精度要求越来越高。目前用于接收风云系列极轨气象卫星下行信号的天线主要有12m和4.2m天线,其具有动态特性高、波束宽度窄等特点,因此需要在天线安装和运行期间对天线的轴系误差进行精确的标定和校准。本文在传统标校方法的基础上,提出了利用太阳进行的误差标校技术,进一步降低了标校环节的复杂程度,提高了标校精度。  相似文献   

WOFOST模型对河南省冬小麦模拟的适用性分析     

张弘  刘伟昌  李树岩 《气象与环境科学》2019,42(1):34-40

为进一步研究WOFOST模型在河南省冬麦区的适用性,以河南省30个农业气象观测站1991—2014年冬小麦观测资料、历史气象资料和土壤资料为依据,对WOFOST模型进行逐站调参和验证,分别建立了30个站的冬小麦模型参数。其中1991—2010年为模型调参年份,2011—2014年为模型验证年份。各站开花期和成熟期调参模拟的归一化均方根误差NRMSE分别小于5%和3%,验证误差分别为3.7%和2.9%。除潢川和固始外,模型对其余各站产量模拟的归一化均方根误差NRMSE全省各站均小于20.0%,验证误差全省平均为15.2%,大部分站点观测值和模拟值相关系数r通过了显著检验。利用调参后的模型模拟2011—2014年冬小麦生长动态变化可知,模拟地上部总干物重与实测单株干物重、模拟LAI与单株叶面积有较一致的变化趋势,拟合度较高。因此,WOFOST模型对河南省冬小麦主要发育阶段、产量及干物质积累模拟能力较强,具有良好的应用前景。  相似文献   

Spatial modelling of reference evapotranspiration using adjusted Blaney-Criddle equation in an arid environment     

Hossein Tabari  B. Shifteh Some'e 《水文科学杂志》2013,58(2):408-420

Abstract

The Blaney-Criddle (BC) temperature-based equation is used in areas where the complete weather data to estimate reference evapotranspiration (ET₀) by the Penman-Monteith FAO-56 (PMF-56) standard model is complex. In this study, the BC equation was first tested and calibrated against the ET₀ values computed by the PMF-56 method using data from 17 weather stations in arid regions of Iran. Then, geographical information systems (GIS)-based spatially-distributed maps of ET₀ were prepared by means of geographic/topographic factors derived from a digital elevation model (DEM) for all months, separately. The results indicate that the original BC equation overestimated PMF-56 ET₀ by 4% at the study sites. The BC equation produced closer ET₀ estimates to the PMF-56 method after it was calibrated. The error rate of <3% for the spatial modelling approach suggests that the developed ET₀ maps are reliable.

Editor D. Koutsoyiannis; Associate editor D. Yang

Citation Tabari, H., Hosseinzadeh Talaee, P., and Shifteh Some'e, B., 2013. Spatial modelling of reference evapotranspiration using adjusted Blaney-Criddle equation in an arid environment. Hydrological Sciences Journal, 58 (2), 408–420.  相似文献   

标准系列制备的一种简单方法     

赵珍义  马成龙 《岩矿测试》1990,9(3):240-242

一些新的稀释装置已用于原子发射光谱法和原子吸收分光光度法中,改变了以往预先配制浓度依次变化的标准系列的习惯做法。Ko(?)cielniak提出的一种非连续稀释方法,所配制溶液的浓度与稀释次数成指数关系。本文采用了这种技术对稀释装置作了改进,只需要一个小锥形瓶,添加或稀释同一个原始溶液便可制备出一系列标准溶液。设备简单、操作方便,用于原子吸收分光光度法测定钾长石中的钠、钾并与常规法对照结果满意。  相似文献   

裂变径迹定年标准化的研究   总被引：9，自引：0，他引：9       下载免费PDF全文

王世成  康铁笙 《地质科学》1994,29(1):78-84

用钴活化箔对SRM962标准铀玻璃进行了刻度,并比较了用钴活化范和用经过刻度的标准铀玻璃测量中子注量的定年方法,结果表明后者的定年结果优于前者,两者都有正系统偏差。利用磷灰石、结石和榍石的7种年龄标准样品和SRM962标准铀玻璃进行多次刻度,发现3种年龄标准矿物的Zeta常数基本一致,为327.4±7.8(±2σ).  相似文献   

配位滴定法同时测定金属离子浓度的研究     

乔延江  王英华  刘友谊 《吉林大学学报(地球科学版)》1994,(3)

将多元校正分析法应用于配位滴定中，以ＥＤＴＡ为滴定剂，玻璃电极为指示电极，饱和甘汞电极为参比电极。依据电位滴定原理，对混合三组分：Ｃｕ￣（２＋）、Ｃｄ￣（２＋）、Ｚｎ￣（２＋）、及Ｃｕ￣（２＋）、ＣＯ￣（２＋）、Ｎｉ￣（２＋）进行测定，各金属离子之间的△ｌｏｇＫ在０．０４～２．３４之间，计算误差一般小于土１０％。  相似文献   

CCD相机二维几何检校     

陶闯  林宗坚  卢健 《武汉大学学报(信息科学版)》1993,(4)

CCD 相机检校是 CCD输入影象处理的一个必不可少的过程。本文对 CCD成象系统的几何性能进行了分析,提出了测定 CCD影象象素比例因子和象主点初值的简易实验方法。在此基础上,构造了一种同时顾及光、电误差的二维检校方法,井进行了相机检校实验。最后对检校结果进行了分析和讨论。  相似文献   

锂离子选择电极的研究 Ⅲ.：开链聚醚三（二环己酰胺）锂电极的制备和应用          下载免费PDF全文

钱国英  焦天权 《盐湖研究》1993,1(3):46-51

以合成的开链聚醚三(二环己酰胺)等中性载体制成了PVC膜Li~+电极,研究了载体结构、膜成分与电极性能的关系,在聚醚三酰胺的胺基中,以环己基取代直链的烷基,显著地改善了Li~+—载体的性能,以邻苯二甲酸二癸酯或其和二苄醚混合增塑的1,1,1—三[1′—(2′—氧杂—3′—二环己胺基羰基)丙基]丙烷Li~+—电极的线性响应范围为2×10~(-5)～10~(-1)mol/L LiCl,K_(Li+Na)~(pot)～8×10~(-3),以Mg(Ac)_2为离子强度调节缓冲剂,用标准比较法或样品加入法测定了LiCl—HCl—H_2O或LiCl—MgCl_2—HCl—H_2O体系中的Li~+,LiCl含量≥2％的样品,测定误差≤5％。  相似文献