南海尖峰海山多金属结壳地球化学   总被引：4，自引：5，他引：4  

梁宏锋  姚德  刘新波  梁德华 《海洋地质与第四纪地质》1991,(4)

南海尖峰海山多金属结壳富含30多种元素,其锰铁矿物主要由钡镁锰矿,δ-MnO_2和FeOOH·xH_2O组成。与其它海区的结壳相比,尖峰海山结壳富含Cu、Ni、Ba、Zn、Pb等元素,而Co、Ti、稀土元素(REE)、Sr等元素相对较贫。研究表明,HREE亏损,具明显的Ce正异常,较明显的Tb正异常和Yb负异常。这是氧化弱碱性海洋环境所致。结壳是水成作用的产物,它的形成受南海独特的古海洋环境所控制,海底火山热液作用,可能也是影响因素之一。  相似文献   

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography     

Zhang Libang Research Engineer  First Institute of Oceanography  Qingdao 《中国海洋工程》1991,(4)

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.  相似文献   

珠江口外陆架表层沉积物的地球化学分区     

周蒂  陈绍谋  陈汉宗 《热带海洋学报》1991,(3)

根据249个表层沉积物样品的Ca,Al,N,P,Mg,Fe,Mn,Ti和有机碳的测定数据,利用稳健RQ型主分量分析及Q型聚类分析方法,对珠江口外陆架表层沉积物进行了地球化学分类,并将该陆架区划分成陆源细碎屑沉积区、经叠加改造的残留泥砂质沉积区、生物碎屑沉积区以及高能环境下的石英砂质沉积区。结果表明了稳健统计方法相对于传统统计方法的优越性,以及采用稳健主分量的Q载荷进行聚类分析相对于用原始变量进行聚类分析的优越性。  相似文献   

湄洲湾表层沉积物中重金属的地球化学特征   总被引：6，自引：2，他引：6  

许爱玉  陈松 《台湾海峡》1993,12(1):16-20

根据1984年湄洲湾表层沉积物中重金属的分析资料,讨论了它们的地球化学特征和主要来源。沉积物中重金属的含量(Fe、Mn、Cu、Ni 的质量分数均值分别为3.21%、730×10~(-6)、19.4×10~(-6)、44×10~(-6)分布比较均匀,Pb、Zn 和Co 含量(质量分数均值分别为47.0×10~(-6)、25.8×10~(-6)和243×10~(-6))偏高,微量金属含量不受Fe-Mn 氧化物和有机物控制,本地区的金属来源受陆源输入的影响明显。  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献   

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method     

赵明  滕斌 《中国海洋工程》2004,18(2):267-280

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.  相似文献   

桶形基础平台三维有限元稳定性分析     

钱荣  周锡礽  孙克俐  张伟 《海洋技术学报》2003,22(4):49-53

以我国第一座桶形基础采油平台工程实例为原型，采用三维有限元计算方法对桶形基础稳定性分析。平台在波浪、风等荷载作用下，其稳定性不仅与平台的整体结构有关，而且与桶形基础及其周围土体相互作用相关。在计算中，利用薄层摩擦单元模拟土与结构间的相互作用，取得了很好的效果。分析结果表明桶形基础采油平台在设计条件下运行是较为稳定的。  相似文献   

Numerical simulation of solitary wave scattering by a circular cylinder array   总被引：1，自引：0，他引：1  

Ming Zhao  Liang Cheng  Bin Teng 《Ocean Engineering》2007,34(3-4):489-499

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.  相似文献   

南海高钙沉积物中18种常微量元素的ICP-AES测定方法研究     

王湘芹  陈志华  任红  孙琼 《海洋科学进展》2007,25(2):220-225

在利用ICP-AES分析南海高钙沉积物中的常微量元素时,钙、镁常常干扰其它元素测试。通过采用优化仪器工作参数、扣除背景值、谱线干扰校正和基体匹配的步骤,消除了元素干扰和钙、镁基体效应,提高了方法的灵敏度和准确度。通过对南海沉积物样品的大量实验和国家一级标准样验证,建立了适宜高钙海洋沉积物元素含量的ICP-AES测试方法。该方法检出限为1.55~271μg/L,相对标准偏差RSD<4.54%(n=6)。  相似文献   

The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure     

Carl T. F. Ross  Andrew P. F. Little 《Ocean Engineering》2001,28(9)

A theoretical and an experimental investigation was carried out, where a carbon fibre corrugated circular cylinder was tested to destuction under external hydrostatic pressure. The theoretical investigation was via the finite element method, where the structure was modelled with several orthotropic axisymmetric thin-walled shell elements. The experimental observations were aided with strategically placed strain gauges. Comparison between theory and experiment showed that the experimentally observed buckling pressure was a little lower than the theoretical prediction. This may have been due to the fact that the model had slight initial geometrical imperfections in the circumferenential direction.  相似文献