A late Holocene winter monsoon record inferred from the palaeo-aeolian sand dune in the southeastern Mu Us Desert, northern China     

Bing Liu  HeLing Jin  Fan Yang 《寒旱区科学》2016,8(5):388-399

The variation of the Asian winter monsoonal strength has seriously affected the climate and environmental conditions in the Asian monsoonal region, and even in marginal islands and the ocean in the East Asian region. However, relevant understanding remains unclear due to the lack of suitable geological materials and effective proxies in the key study areas. Here, we present a grain-size record derived from the palaeo-aeolian sand dune in the southeastern Mu Us Desert, together with other proxies and OSL dating, which reflect a relatively detailed history of the winter monsoon and abrupt environmental events during the past 4.2 ka. Our grain-size standard deviation model indicated that >224 μm content can be considered as an indicator of the intensity of Asian winter monsoon, and it shows declined around 4.2-2.1 ka, enhanced but unstable in 2.1-0.9 ka, and obviously stronger since then. In addition, several typical climate events were also documented, forced by the periodic variation of winter monsoonal intensity. These include the cold intervals of 4.2, 2.8, 1.4 ka, and the Little Ice Age (LIA), and relatively warm sub-phases around 3.0, 2.1, 1.8 ka, and the Medieval Warm Period (MWP), which were roughly accordant with the records of the aeolian materials, peat, stalagmites, ice cores, and sea sediments in various latitudes of the Northern Hemisphere. Combined with the previous progresses of the Asian summer monsoon, we preliminarily confirmed a millennial-scale anti-correlation of Asian winter and summer monsoons in the Late Holocene epoch. This study suggests that the evolution of the palaeo-aeolian sand dune has the potential for comprehending the history of Asian monsoon across the desert regions of the modern Asian monsoonal margin in northern China.  相似文献   

中国装备制造业产学研合作创新网络初探   总被引：29，自引：2，他引：27  

王秋玉  曾刚  吕国庆 《地理学报》2016,71(2):251-275

产学研合作是区域创新的主要途径和重要来源.以中国装备制造产业为例,基于中国知识产权局1985-2012年间的合作发明专利数据,借助SPSS,UCINET,ArcGIS等定量分析工具,对中国装备制造产业合作网络的创新主体结构,空间结构及其演变,创新合作的空间尺度的影响因素进行了分析.研究发现,民营企业,高校在中国装备制造产业创新网络中的地位不断上升,数量不断增加,且已经成为重要的创新源泉;市域空间合作成为发达地区城市产学研创新合作最重要的空间单元,国家空间是欠发达地区城市产学研创新合作的主要空间载体;理工科高校等科技资源的空间集聚态势是导致创新网络层级特征的主要因子,科技资源富集的行政中心如直辖市,省会城市等发达城市成为最重要的资源集聚地,创新源泉和创新合作对象.  相似文献   

二维地震勘探在新疆准东煤田梧桐窝子煤矿区煤层对比中的应用          下载免费PDF全文

刘兴金 《山东国土资源》2016,32(2)

通过人工合成地震记录,了解煤层反射波形成机理,在常规地震时间剖面中确定标准反射波,根据标准反射波连续性、时间间距、动力学特征,在新疆准东煤田梧桐窝子煤矿区煤层对比中取得了较好的应用效果,通过实践证明利用地震资料进行煤层对比方法是可行的,可以在复杂地区提高煤层对比的可靠性。  相似文献   

专题地质填图及有关问题讨论   总被引：2，自引：1，他引：1  

王涛  计文化  胡建民  李建星  胡道功  童英 《地质通报》2016,35(5):633-641

面积性地质调查及填图是今后地质调查的主要工作,如何做好这个工作,并实现地质调查和科研一体化,特别是在已有填图基础上,如何部署和开展新的填图工作,是一个亟待回答的新问题。专题地质填图是针对存在的重要地质或资源、环境问题,或是针对特定目标地质体等,以解决特定问题或满足社会特定需求为主要目的、填图与研究融为一体的地质填图,填图的范围和比例尺依据解决问题和目标地质体而定。专题地质填图是以问题和需求为驱动,是对已有的综合地质填图的补充和提高,是高效实现地调科研一体化的一种方式。论述了专题填图的内涵、必要性,以及开展专题填图的方式和方法。  相似文献   

Faults in the Baikal region: morphostructural and structure-genetic features (case study of the Buguldeika fault junction)     

A.V. Cheremnykh  A.S. Cheremnykh  A.A. Bobrov 《Russian Geology and Geophysics》2018,59(9):1100-1108

Lineament analysis is applied to map the pattern of the Obruchev fault system in the Buguldeika Village area, where several fault zones (Olkhon, Primorsky, Prikhrebtovyi, Buguldeika, and Kurtun) make up a junction. As inferred from the predominant directions of genetically related lineaments, the Olkhon, Primorsky, and Prikhrebtovyi faults originated under NW-SE extension and compression. The extension and compression settings within these zones are reconstructed by analysis of lineaments that have prominent and poor geomorphic expression, respectively. However, the pattern of lineaments well expressed in the surface topography within a weakly deformed block corresponds to reverse slip, while that of poorly pronounced lineaments corresponds to left-lateral strike slip. The study confirms the idea that the latest extension (rifting) stage in the Baikal region reactivated fault zones but did not deform blocks. The blocks store record of residual deformation produced by previous settings of regional compression and shear. The obtained results agree with earlier tectonophysical analysis of faults and fractures in the area and prove the applicability of the suggested approach to map the fault patterns and reconstruct their respective stress settings in areas that underwent multiple deformation events of different ages.  相似文献   

我国地质勘查行业诚信体系建设的路径探讨     

汪恩满 《地质与勘探》2018,54(3):653-658

从我国地勘行业诚信现状和面临的新形势来看,地勘行业诚信体系被视为行业健康发展的命脉和基础。通过分析地勘行业诚信体系建设的现状和面临的问题,借鉴国外发达国家社会信用体系建设的模式,提出政府主导构建地勘行业诚信体系的模式。在此基础上,运用斜坡球体理论提出了地勘行业诚信体系建设的支撑力、下滑力和拉动力以及相互之间的驱动机制,并从抑制及减少下滑力、增强拉动力和构筑牢固的支撑力三方面提出了政府主导模式下各参与方建设地勘行业诚信体系的实现路径和具体措施。  相似文献   

确定砂土动剪切模量和阻尼比的方法对比     

宋东松  冯震  金红山  孙逸涵 《吉林大学学报(地球科学版)》2021,51(5):1366-1380

确定土体动剪切模量的常用方法有规范法、Kumar法和自相关函数法,确定相应阻尼比的方法有规范法、Das and Luo法、Kokusho法、Kumar法和互相关函数法,为了分析不同方法所产生差异,实现定量化对比分析,笔者以福建标准砂（粒径为0.5~1.0 mm）为研究对象,采用不排水的应力控制动三轴试验,探讨不同的确定土体动剪切模量和阻尼比方法的差异性,并给出了不同土体条件建议选用的方法。结果表明：1）3种方法确定动剪切模量的结果有一定的差异,随剪应变的增大结果的差异逐渐增大,有效围压对结果的差异性有所影响,当剪应变为4×10^-3,有效围压为100 kPa时,3种方法差异显著,相对误差最大接近20%;2）而5种方法确定阻尼比的结果差异显著,随着剪应变的增大,5种方法确定的阻尼比相对误差大体上均在迅速减小,只有规范法在有效围压为100 kPa时,其相对误差有较小的增大趋势;5种方法中,Kumar法确定的阻尼比最接近平均阻尼比,互相关函数法远高于平均阻尼比,Das and Luo法和Kokusho法确定的阻尼比基本一致但低于平均阻尼比。建议以后的工程应用中,加载方式为应力控制时,可采用自相关函数法确定动剪切模量,采用Kumar法确定阻尼比,二者确定的动剪切模量和阻尼比均最接近平均值。  相似文献   

煤炭地质勘查产业转型发展的思考与探讨     

谢辉  段中会  贺丹  杨长健  周恩堂 《中国煤炭地质》2021,(2)

煤炭地质勘查工作关系国家能源安全,在国民经济发展中具有重要的战略地位。伴随煤炭行业绿色转型和新能源革命新形势,及时调整产业结构,向大地质、大资源、大生态方向拓展服务领域,为国家生态文明建设和煤炭产业绿色安全高效发展提供坚实的地质技术保障,成为煤炭地质勘查产业转型发展必然趋势和未来发展方向。结合煤田地质勘查工作发展历程及现状、发展趋势,对煤炭地质勘查产业转型发展方向进行深入剖析和探讨。  相似文献   

Would different methodologies for assessing carbon leakage exposure lead to different risk levels? A case study of the Brazilian industry     

Luan Santos  André F. P. Lucena  Rafael Garaffa 《Climate Policy》2019,19(9):1102-1116

Energy-intensive industries play an important role in low-carbon development, being particularly exposed to climate policies. Concern over possible carbon leakage in this sector poses a major challenge for designing effective carbon pricing instruments (CPI). Different methodologies for assessing carbon leakage exposure are currently used by different jurisdictions, each of them based on different approaches and indicators. This paper aims to analyse the extent to which the use of different methodologies leads to different results in terms of exposure to the risk of carbon leakage, using the Brazilian industry sector as a case study. Results indicate that carbon leakage exposure is an expected outcome of eventual CPI implementation in Brazilian industry. However, results vary according to the chosen methodology, so the definition of the criteria is paramount for assessing sectoral exposure to the risk of carbon leakage.

Key policy insights

• Despite increasing discussion about the implementation of carbon pricing on the Brazilian industrial sector, the evaluation of carbon leakage risks is still neglected.

• Assessments of the risk of carbon leakage are directly related to the indicators and criteria used by each methodology. Thus, a given subsector may present different levels of exposure to carbon leakage depending on the methodological choice.

• More than a purely technical discussion, the methodological definition of carbon leakage risk is a political discussion – it can be well-conducted, leading to the success of a CPI, or even sabotaged, by implicitly subsidizing energy-intensive industries.

  相似文献   

基于标准差分析法的X波段双偏振天气雷达资料质量评估     

李思腾  仰美霖  李林  张舒婷  张治国  潘昱冰 《干旱气象》2019,37(3):467-476

2015年9月,北京市气象局在北京地区架设4部X波段双线偏振天气雷达并开展了观测试验。本文利用其中3部雷达在2016年6月30日的观测数据,用标准差分布统计方法,对雷达的观测参量进行初步质量评估。结果表明:(1)3部雷达反射率标准差符合理论值的数据占总观测数据的73.5%~77.9%,反射率的数据波动基本符合理论分布;(2)3部雷达差分反射率标准差符合理论值的数据占总观测数据的68.4%~81.4%,其中房山雷达数据波动较大;(3)3部雷达互相关系数标准差符合理论值的数据占总观测数据的45.7%~63.5%,其中房山雷达数据波动最大,其他2部雷达都有同程度的数据波动;(4)3部雷达差分传播相位标准差符合理论值的数据占总观测数据的73.5%~83.9%,其中房山雷达数据波动相对较大,与雷达其他观测参量相比,差分传播相位的波动较小。  相似文献