鄂 北 地 区 钻 头 优 选 探 讨          下载免费PDF全文

闫永辉 《探矿工程》2005,32(4):40-42

为适应鄂尔多斯塔巴庙区块勘探开发需要，利用区域测井资料进行钻头选型，并结合现场实践优化钻头类型和钻井参数，提高钻井效率。通过新型PDC钻头推广应用,单口井所需钻头数量减少3~4只，减少起下钻3回次以上，缩短钻井周期3~5天。  相似文献   

Effect of suction on the mechanical behaviour of iron ore rock   总被引：1，自引：0，他引：1  

Dragan Grgic  Richard Giot  Franoise Homand  Albert Giraud 《国际地质力学数值与分析法杂志》2005,29(8):789-827

The effect of suction on the behaviour of iron ore has been studied from both physical and mechanical points of view. The porosity and the suction phenomena have been analysed using different experimental techniques. Uniaxial compressive tests on partially saturated samples have shown that the suction is responsible for strength and cohesion improvement. Considering the theory of partially saturated porous soils of Coussy and Dangla (Mécanique des sols non saturés (2002 edn). Hermès Science: 2002; 390), we have proposed a constitutive law for partially saturated iron ore. The real increase in the apparent cohesion due to the capillary attraction forces is overestimated if the yield function is written in terms of effective stresses. The effect of the capillary cohesion has been modelled with a function in the expression of the apparent cohesion of the yield function. The effect of suction on the mechanical behaviour has been represented in the effective stresses space and in the total stresses space like the Alonso model (Géotechnique 1990; 40 :405–430). Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Analysis of pressuremeter geometry effects in clay using critical state models   总被引：1，自引：0，他引：1  

H. S. Yu  M. T. Charles  C. D. Khong 《国际地质力学数值与分析法杂志》2005,29(8):845-859

The conventional interpretation methods of pressuremeter testing effectively approximate pressuremeter membranes as infinitely long. As a result, the effects of the two‐dimensional geometry of pressuremeters are ignored, leading to an overestimation of soil shear strength by pressuremeter testing, as demonstrated in several previous studies. This paper presents results of a numerical study of two‐dimensional geometry effects on self‐boring pressuremeter tests in undrained clay. The results are obtained using critical state soil models with an effective stress formulation. This is in contrast to most (if not all) existing studies on pressuremeter geometry effects, which were based on perfectly plastic soil models (e.g. Yu (Cavity expansion theory and its application to the analysis of pressuremeters. DPhil Thesis, The University of Oxford, 1990), Yeung and Carter (Proc. 3rd Int. Symp. on Pressuremeters, 1990), and Houlsby and Carter (Géotechnique, 1993; 43 (4):567–576)). The present study suggests that the overestimation of soil strength due to the neglect of finite pressuremeter length is significantly affected by the soil model used in the calculations. It is found that for clays with a high overconsolidation ratio (OCR) the strength overestimation predicted using critical state soil models could be considerably smaller than that predicted using perfectly plastic soil models. The main conclusion of this numerical study is that care must be exercised before directly applying any numerically determined pressuremeter geometry correction factors in practice. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Prediction of creep characteristic of rock under varying environment   总被引：2，自引：0，他引：2  

T. N. Singh  A. K. Verma 《Environmental Geology》2005,48(4-5):559-568

The strain developed due to creep is mainly proportional to the logarithm of the time under load, and is mostly proportional to the stress and temperature. At higher temperature the creep rate falls slowly with respect to time, and the creep strain is proportional to a fractional power of time, with the exponent increasing as the temperature increases and reaching a value approximately one-third at temperatures of about 0.5°C. At these temperatures, the creep increases with stress according to a power greater than unity and possibly exponentially. It increases with temperature as (−U/kT), where U is an activation energy and k is Boltzman’s constant. There are different methods to determine the creep strain and the energy of Jog (B) including experimental methods, multivariate regression analysis, and by numerical simulation. These methods are less cumbersome and time consuming. In the present investigation, artificial neural network technique has been used for prediction of the creep strain and energy of Jog (B). Two different networks have been tested and validated. Both the networks have four input neurons and one hidden layer with five neurons, and one output neuron. The data for different rocks at temperatures up to 750°C under conditions of compressive or tortional stress are taken from the literatures. The training and testing data sets used were 163 and 14, respectively. To deal with the problem of overfitting of data, Bayesian regulation has been used and network is trained with suitable training epochs. The coefficients of correlation among the predicted and observed values are found high and they improve the confidence of the users. The mean absolute percentage error obtained are also very low.  相似文献   

Three-dimensional active earth pressure from cohesive backfills with tensile strength cutoff     

Zheng-Wei Li  Tian-Zheng Li  Xiao-Li Yang 《国际地质力学数值与分析法杂志》2020,44(7):942-961

Most of previous analyses on the active earth pressure were performed in two-dimensional cases using the Mohr-Coulomb (M-C) failure function to describe the soil strength. However, all failures of retained slopes indicate a somewhat three-dimensional (3D) feature, and the M-C function is found to overestimate the tensile strength of cohesive soil. In this work, a kinematic limit analysis–based approach is developed for computing the 3D active earth pressure resulting from cohesive backfills. The concept of tensile strength cutoff is adopted to implement the reduction or elimination of tensile strength from the strength envelope. An extended 3D horn failure mechanism that is associated with the modified strength envelope is developed to characterize the collapse of retained slopes. The resultant of active earth pressure is evaluated from the work rate balance equation and expressed as an unfactored coefficient. The obtained results indicate that less support provided by the wall is required when allowing the existence of soil cohesion and 3D effects and that eliminating the tensile strength can observably increase the active earth pressure, especially for the backfill with a great level of cohesion.  相似文献   

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach     

Samir Maghous  José E. B. Winiawer  Vanessa F. Pasa Dutra 《国际地质力学数值与分析法杂志》2014,38(18):2009-2032

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Mechanical transitional behavior of binary mixtures via DEM: Effect of differences in contact-type friction coefficients     

《Computers and Geotechnics》2017

This report presents a numerical investigation of the shear behavior of binary mixtures via a two-dimensional discrete element method. The effect of the coarse particle content on the peak shear strength of mixtures is investigated for different contact-type friction coefficients. A detailed analysis on the anisotropies enables us to understand the microscopic mechanisms that result in the dependency of the peak shear strengths on the coarse particle content. The contributions of different contact types to the peak shear strength are quantified. Lastly, the inter-particles structures are examined when the binary mixtures become coarse-particle-supported structures.  相似文献   

From soil aggregates to riverine flocs: a laboratory experiment assessing the respective effects of soil type and flow shear stress on particles characteristics          下载免费PDF全文

T. Grangeon  I. G. Droppo  C. Legout  M. Esteves 《水文研究》2014,28(13):4141-4155

Particles eroded from hillslopes and exported to rivers are recognized to be composite particles of high internal complexity. Their architecture and composition are known to influence their transport behaviour within the water column relative to discrete particles. To‐date, hillslope erosion studies consider aggregates to be stable once they are detached from the soil matrix. However, lowland rivers and estuaries studies often suggest that particle structure and dynamics are controlled by flocculation within the water column. In order to improve the understanding of particle dynamics along the continuum from hillslopes to the lowland river environment, soil particle behaviour was tested under controlled laboratory conditions. Seven flume erosion and deposition experiments, designed to simulate a natural erosive event, and five shear cell experiments were performed using three contrasting materials: two of them were poorly developed and as such can not be considered as soils, whilst the third one was a calcareous brown soil. These experiments revealed that soil aggregates were prone to disaggregation within the water column and that flocculation may affect their size distribution during transport. Large differences in effective particle size were found between soil types during the rising limb of the bed shear stress sequence. Indeed, at the maximum applied bed shear stress, the aggregated particles median diameter was found to be three times larger for the well‐developed soil than for the two others. Differences were smaller in the falling limb, suggesting that soil aggregates underwent structural changes. However, characterization of particles strength parameters showed that these changes did not fully turn soil aggregates into flocs, but rather into hybrid soil aggregate–floc particles. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Constitutive modelling of fine-grained gassy soil: A composite approach     

Zhiwei Gao  Yi Hong  Lizhong Wang 《国际地质力学数值与分析法杂志》2020,44(9):1350-1368

Fine-grained marine sediments containing large undissolved gas bubbles are widely distributed around the world. Presence of the bubbles could degrade the undrained shear strength (s_u ) of the soil, when the gas pressure u_g is relatively high as compared with the effective stress in the saturated soil matrix. Meanwhile, the addition of bubbles may also increase s_u when the difference between u_g and pore water pressure u_w becomes smaller than the water entry value, causing partial water drainage from the saturated matrix into the bubbles (bubble flooding) during globally undrained shearing. A new constitutive model for describing the two competing effects on the stress-strain relationship of fine-grained gassy soil is proposed within the framework of critical state soil mechanics. The gassy soil is considered as a three-phase composite material with compressible cavities, which allows water entry from the saturated matrix. Bubble flooding is modelled by introducing an additional positive volumetric strain increment of the saturated clay matrix, which is dependent on the difference between pore gas and pore water pressure based on experimental observations. A modified hardening law based on that of the modified Cam clay model is employed, which in conjunction with the expression for bubble flooding, can describe both the detrimental and beneficial effects of gas bubbles on soil strength and plastic hardening in shear. Only two extra parameters in addition to those in the modified Cam clay model are used. It is shown that the key features of the stress-strain relationship of three fine-grained gassy soils can be reproduced satisfactorily.  相似文献   

Displacement velocity effects on rock fracture shear strengths     

《Journal of Structural Geology》2016

Triaxial shear tests are performed to assess the effects of displacement velocity and confining pressure on shear strengths and dilations of tension-induced fractures and smooth saw-cut surfaces prepared in granite, sandstone and marl specimens. A polyaxial load frame is used to apply confining pressures between 1 and 18 MPa with displacement velocities ranging from 1.15 × 10⁻⁵ to 1.15 × 10⁻² mm/s. The results indicate that the shearing resistances of smooth saw-cut surfaces tend to be independent of the displacement velocity and confining pressure. Under each confinement the peak and residual shear strengths and dilation rates of rough fractures increase with displacement velocities. The sheared-off areas increase when the confining pressure increases, and the displacement rate decreases. The velocity-dependent shear strengths tend to act more under high confining pressures for the rough fractures in strong rock (granite) than for the smoother fractures in weaker rocks (sandstone and marl). An empirical criterion that explicitly incorporates the effects of shear velocity is proposed to describe the peak and residual shear strengths. The criterion fits well to the test results for the three tested rocks.  相似文献