Effects of laser beam alignment tolerance on lidar accuracy   总被引：2，自引：0，他引：2  

Damir Latypov   《ISPRS Journal of Photogrammetry and Remote Sensing》2005,59(6):361-368

One of the major lidar error sources not yet analyzed in the literature is the tolerance of the laser beam alignment with respect to the scanning mirror. In this paper, the problem of quantifying these errors is solved for rotating polygon mirror type lidar systems. An arbitrary deviation of the beam from its design direction–the vector of beam misalignment–can be described by two independent parameters. We choose these as horizontal and vertical components of the misalignment vector in the body frame. Either component affects both, horizontal and vertical lidar accuracy. Horizontal lidar errors appear as scan line distortions—along and across track shifts, rotations and scaling. It is shown that the horizontal component of misalignment results in a scan line first being shifted across the track and then rotated around the vertical at the new center of the scan line. Resulting vertical lidar error, being a linear function of the scan angle, is similar to that produced by a roll bias. The vertical component of the beam misalignment causes scan line scaling and an along track shift. The corresponding vertical error is quadratic with respect to the scan angle. The magnitude of these effects is significant even at tight alignment tolerances and cannot be realistically accounted for in the conventional calibration model, which includes only range, attitude and GPS biases. Therefore, in order to attain better accuracy, this model must be expanded to include the beam misalignment parameters as well. Addition of new parameters into the model raises a question of whether they can be reliably solved for. To give a positive answer to this question, a calibration method must utilize not only ground control information, which is typically very limited, but also the relative accuracy information from the overlapping flight lines.  相似文献   

白云鄂博群中两个重要不整合界面特征及区域对比   总被引：5，自引：0，他引：5  

贾和义  许立权  张玉清 《内蒙古地质》2002,(2)

白云鄂博群尖山组顶部的钙质风化壳和比鲁特组顶部的铁质风化壳分别代表长城系与蓟县系及蓟县系与青白口系的分界,并具较大区域上的一致性和可对比性。不整合界面的重新厘定,必然导致白云鄂博群的解体或改为白云鄂博超群。  相似文献   

Structure sismique du socle paléozoı̈que du bassin des Doukkala,Môle côtier,Maroc occidental. Indication en faveur de l'existence d'une phase éo-varisqueSeismic structure of the Doukkala basin,Palaeozoic basement,western Morocco: a hint for an Eovariscan fold-and-thrust belt     

Hassan Echarfaoui  Mohamed Hafid  Abdallah Aı̈t Salem 《Comptes Rendus Geoscience》2002,334(1):13-20

Seismic profiles and well data from the Doukkala basin unravel the structure of the Palaeozoic basement and suggest that this coastal zone of western Morocco was affected by a compressive phase during the Frasnian. This resulted in the formation of upright, plurikilometric folds associated with reverse faults (North Doukkala), and of asymmetrical folds associated with mostly west verging ramps (South Doukkala). Folding involved all pre-Upper Frasnian formations and caused partial or total hiatus of Upper Frasnian–Strunian strata. This event can be correlated with the orogenic phase reported from more internal domains of the Morocco Hercynian belt, where it is referred to as the ‘Bretonne’ or ‘Eovariscan’ phase. To cite this article: H. Echarfaoui et al., C. R. Geoscience 334 (2002) 13–20  相似文献   

Statistical characteristics of chlorophyll-a concentration in Hong Kong′s coastal waters     

CHEN Xiaoling  Yok Sheung Li  LI Zhilin 《地理学报(英文版)》2002,12(3)

In this paper seven of the ten Water Control Zones (WCZs) in Hong Kong′s coastal waters with monthly or bi-weekly sampling data of 17 parameters collected at 37 monitoring stations from 1988 to 1999 were selected to analyze the spatial and temporal variations of chlorophyll-a and its influencing factors. Cluster analysis was employed to group the monitoring stations based on the structure of the data set. Multiple step regression was employed to determine the significant influencing factors of chlorophyll-a level. The results suggest that all the monitoring stations could be grouped into two clusters. Cluster I with frequent red tide incidents comprises two WCZs which aresemi-enclosed bays. Cluster II with less red tide occurrence comprises the other five WCZs in an estuarine environment in the west. For both clusters, the organic contents indicator, BOD5, was a common significant influencing factor of the chlorophyll-a level. Nitrogen and light penetration condition related to turbidity, total volatile solids and suspended solids had more influence on the cholophyll-a level in Cluster I than in Cluster II, while phosphorus and oceanographic conditions associated with salinity, temperature, dissolved oxygen and pH were more important in Cluster II than in Cluster 1. Generally, there was a higher average chlorophyll-a level in winter and autumn in a year.The chlorophyll-a level was much higher in Cluster I than in Cluster II among all seasons. Although the chlorophyll-a concentration had great variations from place to place in Hong Kong′s coastal waters, it seemed to have a common long term fluctuation period of 8-10 years with a high-low-high variation in the period in the whole region, which might be influenced by other factors of global scale.  相似文献   

贾汪煤田为何未能向北东继续延伸     

刘明雷  冯建强 《中国煤田地质》2003,15(2):5-7

贾汪煤田的基本构造形态为贾汪向斜。通过对贾汪向斜北东延长段原地系统和外来系统的分析研究，认为在贾汪石炭——二叠纪煤田北界伏山前断裂的北东盘上，受构造应力的影响，奥陶系沿着其与寒武系界面间的软弱层被推覆，在原地代之以大面积分布的是青白口——震旦系及部分寒武系而非石炭——二叠系，从而造成了贾汪煤田没有向北东继续延伸。  相似文献   

比奥固结理论在堆载预压加固工程场地中运用   总被引：4，自引：2，他引：4  

徐书平  刘祖德 《岩土力学》2003,24(2):307-310

运用平面应变比奥固结有限单元法，对南京某钢铁厂江边原料厂采用堆载预压结合塑料排水板处理的软土地基进行了计算，得到了较为理想的效果。计算中将塑料排水板合理地简化成等效砂墙，理论计算结果与实测结果吻合较好。验证了计算方法是合理可行的。  相似文献   

垂线测量数据管理软件的研制及应用     

邓兴升  王新洲  游扬声 《测绘信息与工程》2003,28(1):11-13

介绍了基于局域网络开发的垂线测量数据管理软件的组成、原理、功能、操作及应用，该软件操作简单、使用方便、极易掌握，并能通过多方位、直观的图形表示来反映监测对象的挠度、倾斜、水平位移状态。  相似文献   

基于约束点的曲线一致性化简   总被引：5，自引：0，他引：5  

应申  李霖 《武汉大学学报(信息科学版)》2003,28(4):488-491

详细探讨了基于平面上的特征约束点(无论在曲线上还是在曲线外)的曲线化简，并针对各种情况提出了一致性化简的方法。  相似文献   

框标与影像叠置时的自适应内定向算法   总被引：1，自引：0，他引：1  

张过  江万寿  李德仁 《测绘学报》2003,32(1):67-69

虽然自动内定向在过去的几年是研究的热点问题，但是针对P31这类近景相机的影像进行自动内定向还存在一些问题，主要原因在于P31影像的框标叠置在景物上。认为自动内定向可以看做一个全局影像匹配问题，分两步进行。首先，用模板匹配和Hough变换在影像上提取可能的框标点，然后用软对应和确定性退火结合仿射变换得到惟一的框标位置。试验和结果分析说明，利用本文方法，可以惟一确定框标，并发现严重的粗差。同时提出自动确定最小的框标搜索区域的方法。  相似文献   

地下管线源数据处理方法的研究     

翁必华 《现代测绘》2003,26(5):15-17

为了保障顺利建设上海市地下管线数据库．需要对现存的地下管线的源数据进行一些技术处理，以满足数据入库的要求。本文主要个绍：笔者在从事地下管线源数据处理工作中，碰到的现存的上海市地下管线源数据对于建设上海市地下管线数据库所存在的一些问题：以及笔者利用Autodesk公司的AutoCAD二次开发工具开发的应用程序来处理这些问题的方法。  相似文献