地震勘探技术在深部找煤中的应用     

李正越 《中国煤炭地质》2008,(11):67-68

成矿理论与勘探实践证明,东部一些老矿由于勘探深度、范围的限制以及认识上的局限,在矿区深部、周边仍有一些矿未能发现和查明,其中相当一部分仍具有找矿潜力;而寻找西部新的煤炭资源是国家“稳定东部发展西部”战略需要。针对中国东西部不同的地质条件和勘探目标,其地震勘探野外施工方法及资料处理原则有所差异;而资料解释在东部以查明地层赋存形态、煤层赋存范围、构造发育特征为主,西部则以寻找煤系地层波阻抗差异明显、连续性好的反射波组为解释重点。地震勘探技术在中国东西部的二个典型地震时间剖面佐证了其在深部找矿的应用效果。  相似文献   

矿产预测中成矿信息的提取和强化     

浦志伟  朱裕生 《地质论评》1993,39(6):508-514

成矿信息的提取是矿产预测的重要手段,其方法的有效性直接影响到预测成果的可靠性。在成矿规律研究的基础上,有意识地干预模型的构成,突出与成矿有关的信息;抑制某些成矿意义不明显和属干扰的信息,有目的地使模型向反映成矿信息的方向逼近,提高模型与矿床实际赋存地质环境的吻合程度,均是成矿信息提取和强化的内涵。本文从研究实践中总结了先验约束模型和非先验约束模型的强化方法,在新疆阿勒泰地区的地质－找矿工作中已取得  相似文献   

Energy efficiency evaluation,technology gap ratio,and determinants of energy productivity change in developed and developing G20 economies: DEA super-SBM and MLI approaches     

《Gondwana Research》2024

This study employed Slack-based measure (SBM), Meta-frontier analysis, and Malmquist–Luenberger index (MLI) approaches to measure energy efficiency (EE), production technology heterogeneity, and energy productivity variation and its main determinants in developed and developing G20 countries for the period 1995–2020. The study's findings are: (i) Average EE for G20 countries is 0.8577, but still has an improvement potential of 14.23 percent. (ii) Developed countries have a higher average EE than developing (0.8927 > 0.8290). Results further revealed that energy efficiency scores in Argentina, Australia, Brazil, France, Saudi Arabia, South Africa, the US, the UK, and Korea are>1. (iii) Technology gap ratio (TGR) value in developed countries is higher than in developing (0.9869 > 0.6801), indicating that developed countries have advanced energy technologies superiority. The average MLI is less than one, showing a decline in energy productivity mainly due to a decline in technical efficiency, as EC < TC. (iv) Developed G20 countries get 0.64 percent aggregate growth in energy productivity as their MLI score is 1.0064, mainly due to technological growth (TC = 1.0161). Developing G20 countries, on the other hand, witnessed a decline in their energy productivity during 1995–2020, as MLI = 0.9925 > 1, designating that, on average, there is a 0.75 % decline in MLI.  相似文献   

稀土矿床：基本特点与全球分布规律     

毛景文  宋世伟  刘敏  孟健寅 《地质学报》2022,96(11):3675-3697

本文介绍了全球稀土资源供需历史、现状和对未来的展望。从矿床成因视角切入，将稀土矿床分为内生和外生两大类型，其中内生稀土矿床包括碳酸岩型、碱性岩型、碱性岩型- 碳酸岩型、氧化铁铜金型、热液脉型，外生稀土矿床包括风化壳离子吸附型、沉积岩型、沉积矿产(煤矿、铝土矿和沉积磷矿)伴生型、砂矿和现代海洋底部含稀土的锰结核、结壳和软泥型。归纳总结了主要类型矿床的基本特点和时空分布；认为内生稀土矿床产出于四类构造环境，包括裂谷环境、碰撞后伸展环境、大陆碰撞环境和后俯冲伸展环境；从构造演化入手，探讨了在外生与内生地质过程中稀土元素的迁移和富集规律，建立了涵盖主要矿床类型的构造- 成矿模型。  相似文献   

中国南方离子吸附型稀土矿床成矿类型及其母岩控矿因素探讨     

付伟  赵芹  罗鹏  李佩强  陆济璞  周辉  易泽邦  许成 《地质学报》2022,96(11):3901-3923

传统认为中国南方的离子吸附型稀土矿床可划分为以“足洞式”为代表的重稀土型和以“河岭式”(或“花山式”)为代表的轻稀土型两种矿化类型。然而，近年来发现的许多矿床(如清溪、寨背和馒头山等)的赋矿风化壳中出现了轻稀土矿与重稀土矿并存现象，表现出特殊的“上轻下重”双层矿体结构。这指示了除重稀土型和轻稀土型之外，还存在着轻重稀土共生型的过渡类型。本研究通过对三种不同成矿类型的若干典型矿床系统对比，指出成矿类型的多样性与母岩性质密切相关，尤其是母岩的稀土元素地球化学和稀土载体矿物属性是制约成矿类型变化的关键因素。统计数据表明，从重稀土型→轻重稀土共生型→轻稀土型，成矿母岩的全岩稀土总量变化不大(ΣREY: 200×10-6~450×10-6→200×10-6~500×10-6→200×10-6~800×10-6)，但轻重稀土配分值出现较显著的区间性差异(ΣLREE/ΣHREY: 02~1→1~5→2~10)。与之同时，母岩中能为离子相稀土提供物源且具有重稀土配分属性的稀土副矿物类型和数量明显减少，这与全岩稀土元素地球化学特征中重稀土分量占比的降低趋势也互相匹配。该结果指示，以往认为重稀土配分母岩形成重稀土矿床、轻稀土配分母岩形成轻稀土矿床的传统观点需要外延，即一部分具有低度轻稀土配分属性(1＜ΣLREE/ΣHREY＜5)且含有丰富易风化稀土副矿物的母岩还可能形成轻重稀土共生型矿床，该认识可为今后离子吸附型稀土矿床勘查工作提供新的找矿依据。  相似文献   

近海核电厂核素地下水释放通量的模型计算方法     

朱君  李婷  陈超  谢添  张艾明 《吉林大学学报(地球科学版)》2021,51(1):201-211

为了定量计算陵区近海核电站排水管线泄漏情景下核素通过地下水途径向海洋环境的释放通量，以某近海核电站为例进行研究。首先，应用GOCAD软件建立三维地形地质模型，刻画地层的分布、剥蚀以及倾向等特点；然后，运用地下水数值模拟软件FEFLOW精细刻画丘陵区地下水系统的补给、径流和排泄特征；最后，以不被吸附滞留的核素³H和被吸附滞留的核素⁹⁰Sr、¹³⁷Cs为对象，通过实验测定了⁹⁰Sr、¹³⁷Cs在不同岩土介质中的分配系数，模拟计算了排水管线连续渗漏60 a后³H、⁹⁰Sr、¹³⁷Cs在地下水中的放射性分布及释放。结果表明：³H迁移速度基本与地下水流速一致，地下水中的最大放射性浓度为0.285 0 Bq/L，第20 000天时向收纳水域的释放通量达到最大值，约526 Bq/d；⁹⁰Sr吸附性能相对较弱，最大迁移距离约80 m，地下水中的最大放射性浓度为0.032 1 Bq/L；¹³⁷Cs吸附能力较强，相当长的时间内被滞留在管线附近，地下水中最大放射性浓度分别为6.840×10^-3 Bq/L，释放通量为0 Bq/d。由弥散度的不确定分析可知，弥散度越大，地下水中³H的最大放射性浓度越小，向海洋环境的释放通量越多。  相似文献   

膜分离技术的应用及发展趋势   总被引：8，自引：0，他引：8  

岳志新  马东祝  赵丽娜  赵寒梅 《云南地理环境研究》2006,18(5):52-57

综述世界和中国膜分离技术的发展，并对膜分离技术的基本特性、技术特点、膜材料、分类及膜分离装置进行了简单介绍；并介绍了膜分离法在化工及石油工业、食品工业、医药工业和医疗设备、生物技术和环境工程中的应用，并分析了膜分离技术将会在膜材料、新的膜过程和集成膜过程3个方面的发展趋势。同时指出如果能解决膜产品的价格、膜污染和膜分离性能的提高这3个膜的制约因素，膜分离技术将在人类社会的发展史上起到不可替代的作用。  相似文献   

Exploiting the dual functions of polymer depressants in fine particle flotation   总被引：1，自引：0，他引：1  

Qi Liu  David Wannas  Yongjun Peng 《International Journal of Mineral Processing》2006,80(2-4):244-254

Fine hydrophilic particles are known to be entrained with water in flotation of many ores. Flocculation of the hydrophilic particles by polymer depressants could potentially reduce the mechanical entrainment of these particles. This paper reports testwork completed on fine particles of several solids, iron oxide, hydroxyapatite and sphalerite, as well as on a relatively coarse quartz sample (− 75 + 38 μm). Dodecylamine was used as a collector for quartz, and several dispersants and polymer depressants, including sodium silicate, sodium metaphosphate, zinc sulfate, cornstarch, corn dextrin and carboxymethyl celluloses (with molecular weights of both 700,000 and 80,000) were used as flotation modifiers. The major part of the testwork involved flotation tests in a 200 mL flotation column. It was observed that flocculation of the fine hydrophilic particles significantly reduced their mechanical entrainment, while dispersion severely aggravated it. Thus, in the flotation separation of synthetic mixtures of the − 75 + 38 μm quartz and fine (reagent grade) iron oxide or hydroxyapatite, polymer depressants that caused flocculation performed better than those that did not cause flocculation.  相似文献   

DDT residue in soil and water in and around the abounded area of DDT manufacturing factory     

Mohammad Rasul Jan Mahmood A Khawaja Jasmin Sha Kashif Gul 《中国地球化学学报》2006,25(B08):182-182

Due to the persistent nature of DDT, a persistent organic pollutant and its adverse environmental and health impacts, the present study was undertaken to examine the residual DDT in and around DDT manufacturing factory in Amman Gharh, Nowshera, NWFP. The factory was established in 1963 and remained in operation till 1994. Composite samples of soil, sediments and water were collected in and around the factory area, nearby DDT stores, main factory drain leading to river and nearby villages. Standard procedures were used for the collection, transportation and storage of samples for analysis. Physical parameters for the collected water samples measured were temperature, pH and conductance. Extraction of each sample for DDT analyses was carried out in triplicates using soxhlet extraction apparatus. The extract was transferred to well washed, clean; dry glass vial, sealed and put in the refrigerator. Gas Chromatograph with electron capture detector and capillary column was used for analysis. DDT in the samples was identified on the basis of their retention time and quantified on the basis of peak areas. It is evident from the analytical data obtained in the present study that both water and soil in and around the factory area are still contaminated with DDT, despite the closure of the factory since the past few years.  相似文献   

高压旋喷桩有关问题的探索和研究          下载免费PDF全文

李维平王桂  崔长江 《探矿工程》2006,33(11):16-18

通过工程实例，介绍了单管法高压旋喷桩施工工艺、技术参数、施工中存在的问题以及注意事项。阐述了一些常见故障及预防措施。  相似文献