Weakness and mechanical anisotropy of phyllosilicate-rich cataclasites developed after mylonites of a low-angle normal fault (Simplon Line,Western Alps)     

《Journal of Structural Geology》2016

The Simplon Fault Zone is a late-collisional low-angle normal fault (LANF) of the Western Alps. The hanging wall shows evidence of brittle deformation only, while the footwall is characterized by a c. 1 km-thick shear zone (the Simplon Fault Zone), which continuously evolved, during exhumation and cooling, from amphibolite facies conditions to brittle-cataclastic deformations. Due to progressive localization of the active section of the shear zone, the thermal-rheological evolution of the footwall resulted in a layered structure, with higher temperature mylonites preserved at the periphery of the shear zone, and cataclasites occurring at the core (indicated as the Simplon Line). In order to investigate the weakness of the Simplon Line, we studied the evolution of brittle/cataclastic fault rocks, from nucleation to the most mature ones. Cataclasites are superposed on greenschist facies mylonites, and their nucleation can be studied at the periphery of the brittle fault zone. This is characterized by fractures, micro-faults and foliated ultracataclasite seams that develop along the mylonitic SCC′ fabric, exploiting the weak phases mainly represented by muscovite and chlorite. Approaching the fault core, both the thickness and frequency of cataclasite horizons increase, and, as their thickness increases, they become less and less foliated. The fault core itself is represented by a thicker non-foliated cataclasite horizon. No Andersonian faults or fractures can be found in the footwall damage zone and core zone, whilst they are present in the hanging wall and in the footwall further from the fault. Applying a stress model based on slip tendency, we have been able to calculate that the friction coefficient of the Simplon Line cataclasites was <0.25, hence this fault zone is absolutely weak. In contrast with other fault zones, the weakening effect of fluids was of secondary importance, since they accessed the fault zone only after an interconnected fracture network developed exploiting the cataclasite network.  相似文献   

Smoothing and re-roughening processes: The geometric evolution of a single fault zone     

《Journal of Structural Geology》2016

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.  相似文献   

架子台沟低品位铅锌矿原生晕地球化学特征及深部矿产预测     

伍光锋  李健  王博  李晓亚 《化工矿产地质》2016,(1):7-15

对架子台沟一带1:50 000化探异常检查中,地表发现有铅锌矿化显示,经对激电测深异常深部钻探验证发现有低品位锌矿(化)体。通过系统采集0号勘探线上的2个钻孔中岩石、矿石样品,进行原生晕特征研究分析表明:矿体近矿元素为Ag、Pb、Zn、Cd,尾矿元素为W、Sn、Bi;轴向分带序列由上至下为:Pb-Au-Ag-Mo-Bi-Sn-Cu-Cd-W-Zn。对成矿元素与相关金属元素进行聚类分析、因子分析,并结合激电测深结果,认为在矿体的侧部、深部仍可能有盲矿体。  相似文献   

Development of a new method for efficiently calculating of evaporation from the phreatic aquifer in variably saturated flow modeling          下载免费PDF全文

HAO Qi-chen  SHAO Jing-li  CUI Ya-li  ZHANG Qiu-lan 《地下水科学与工程》2016,4(1):26-34

In this paper, we proposed a new method that has been developed based on the surface soil moisture content (SSMC) to more efficiently calculate the groundwater evaporation in variably saturated flow modeling. In this method, the empirical formula to calculate evaporation was modified and the value of the formula varies from zero to one as a closed interval. In addition, the simulation code for calculating the groundwater evaporation based on the SSMC method was incorporated into the EOS9 module of Tough2, a variably saturated flow modeling code. Finally, two numerical tests and a case simulation were conducted to verify the feasibility and accuracy of the SSMC method. Simulation results indicate that the SSMC method is capable of appropriately simulating the characteristics of water flow in vadose zone and the amount of evaporation with the variable water table. And such results are in coincidence with the value calculated by the logistic function method, and fit well with the measured data globally rather than locally.  相似文献   

Formation of low permeability reservoirs and gas accumulation process in the Daniudi Gas Field,Northeast Ordos Basin,China     

《Marine and Petroleum Geology》2016

The Daniudi Gas Field is a typical large-scale coal-generated wet gas field located in the northeastern Ordos Basin that contains multiple Upper Paleozoic gas-bearing layers and considerable reserves of gas. Based on integrated analysis of reservoir petrology, carbonate cement C–O isotope, geochemistry of source rocks and HC gas and numerical basin modeling, a comprehensive study focusing on the formation of low permeability reservoirs and gas generation process uncovers a different gas accumulation scene in Daniudi Gas Field. The gas accumulation discovered was controlled by the reservoir permeability reduction and gas generation process, and can be divided into two distinct stages by the low permeability reservoir formation time: before the low permeability reservoir formation, the less matured gas was driven by buoyancy, migrated laterally towards NE and then accumulated in NE favorable traps during Late Triassic to early Early Cretaceous; after the low permeability reservoir formation, highly matured gas was driven by excessive pressure, migrated vertically and accumulated in-situ or near the gas-generating centers during early to late Early Cretaceous. The coupling relationship between reservoir diagenetic evolution and gas generation process controlled on gas accumulation of the Daniudi Gas Field. This study will aid in understanding the gas accumulation process and planning further E&D of the Upper Paleozoic super-imposed gas layers in the whole Ordos Basin and other similar super-imposed low permeability gas layer basins.  相似文献   

聚龙小镇DZK1地热勘查孔钻探施工技术          下载免费PDF全文

张东方 《探矿工程》2018,45(11):29-33

地热勘查孔（探采结合孔）是在矿山钻探施工工艺的基础上进行的探索性施工。着重介绍了福建省泉州市聚龙小镇DZK1地热勘查孔在钻探施工过程中遇到的施工难题以及新技术、新工艺的应用。如大口径单管取心、空压机洗井和活塞洗井相结合的洗井方法、套管的隔级使用、深孔测试钻杆密闭性、深孔磨钻头、在涌水量大的地层钻进等。  相似文献   

A Study of the Extended-range Forecast for the Low Frequency Temperature and High Temperature Weather over the Lower Reaches of Yangtze River Valley in Summer     

Qiuming Yang 《地球科学进展》2018,33(4):385-395

Based on the observational data, the variations of Intraseasonal Oscillation (ISO) of the daily temperatures and its relationships to the high temperature in summer over the lower reaches of the Yangtze River Valley (LYRV) were studied for the period of 1979-2011. It is found that the daily temperatures over LYRV in May-August was mainly of periodic oscillations of 1525, 3060 and 6070 days, and the interannual variation of the intensity of its 3060-day oscillation had a strongly positive correlation with the number of days with daily highest temperature over 35 ℃ in July-August. Low frequency components of daily temperature in the LYRV, and the principal components of the Eastern Asian 850 hPa low frequency temperature, over a time period ranging from 1979 to 2000, were used to establish the Extended Complex Autoregressive model (ECAR) on an extended-range forecast of the 3060-day low frequency temperature over the LYRV. A 11-year independent real-time extended-range forecast was conducted on the extended-range forecast of low frequency component of the temperature over the LYRV in May-August, for the period ranging from 2001 to 2011. These experimental results show that this ECAR model, which is based on a data-driven model, has a good forecast skill at the lead time of approximately 23 days, with a forecast ability superior to the traditional autoregressive (AR) model. Hence, the development and variation of the leading 3060-day modes for the Eastern Asian 850 hPa low frequency temperatures and temporal evolutions of their relationships to low frequency components of the temperature over the LYRV in summer are very helpful in predicting the persistent high temperature over the LYRV at a 20 to 25 days lead.  相似文献   

序贯高斯模拟在矿石品位估计中的应用研究          下载免费PDF全文

刘占宁  宋宇辰  孟海东  于晓燕 《地质找矿论丛》2018,33(1):149-155

随机模拟是地质统计方法的重要内容。在矿石品位估计方法中克里格方法作为一种无偏估计方法,常被用于矿石品位的估计。但克里格法估值存在平滑效应。作者在分析序贯高斯模拟和普通克里格法基本原理的基础上,运用序贯高斯模拟方法和普通克里格方法对某铁矿体内全铁(TFe)品位进行估计,给出了品位估计结果模型。研究从勘探线方向、垂直勘探线方向和竖直方向分别计算变差函数,对球状模型、指数模型、高斯模型的变差函数拟合效果进行了优选,结果表明球型模型拟合效果最好。针对序贯模拟和克里格品位估值效果进行了分析,结果显示:序贯高斯模拟结果在品位分布形态上更接近样品品位分布形态,其平滑效应更小;克里格方法估计与序贯高斯模拟方法相比仅在品位均值方面更接近样本品位均值。因此,认为序贯高斯模拟方法可以更好地刻画矿体内品位分布状态。  相似文献   

关于修改完善钛砂矿地质勘探规范部分内容的建议     

卢建国 《地质论评》2021,67(3):6703681-6703735

正砂矿(金属矿产)地质勘查规范是2002年制订颁布的,在勘查工作及报告审查中发现:该规范有些地方不严不细,缺少明确统一标准,或者不具可操作性而导致混乱。所以有进一步修改完善的必要。砂矿(金属矿产)地质勘查规范(DZ/T0208-2002)适用于云南、广西的残坡积型钛砂矿勘查,本文结合上述地区钛砂矿的长期实践,谈谈规范中几处需要修改完善内容。  相似文献   

黑龙江省海伦市长发镇土地质量地球化学评价及开发建议     

刘国栋  杨泽  戴慧敏  张一鹤  肖红叶  陈江 《地质与资源》2021,29(6):533-542

  相似文献