工程岩体三维构模中钻孔数据处理方法   总被引：1，自引：0，他引：1  

李卫兵  刘斌  何满潮  徐能雄 《吉林大学学报(地球科学版)》2004,(Z1)

原始数据处理是工程岩体三维构模中存在的主要困难之一。从三维构模的角度,将工程岩体按几何特征抽象为4种结构单元类型。钻孔数据是描述工程岩体的重要原始数据,具有多尺度性。针对这个特点,提出钻孔数据纵向概化准则,解决工程岩体多尺度显示问题;根据地质学的地质数据解译方法,结合岩层层状分布的特点,提出层处理方法对钻孔数据进行概化处理,确定工程岩体所对应的结构单元类型,创建工程岩体结构单元三维构模数据,建立由钻孔数据所得到的工程岩体三维模型。  相似文献   

Determination of S-wave velocity structure using microtremors and spac method applied in Thessaloniki (Greece)     

Paschalis Apostolidis  Dimitrios Raptakis  Zafeiria Roumelioti  Kyriazis Pitilakis 《Soil Dynamics and Earthquake Engineering》2004,24(1):49-67

Array measurements of microtremors at 16 sites in the city of Thessaloniki were performed to estimate the V_s velocity of soil formations for site effect analysis. The spatial autocorrelation method was used to determine phase velocity dispersion curves in the frequency range from 0.8–1.5 to 6–7 Hz. A Rayleigh wave inversion technique (stochastic method) was subsequently applied to determine the Vs profiles at all the examined sites. The determination of V_s profiles reached a depth of 320 m. Comparisons with V_s values from cross-hole tests at the same sites proved the reliability of the SPAC method. The accuracy of the V_s profiles, the ability to reach large penetration depths in densely populated urban areas and its low cost compared to conventional geophysical prospecting, make Mictrotremor Exploration Method very attractive and useful for microzonation and site effects studies. An example of its application for the site characterization in Thessaloniki is presented herein.  相似文献   

Optimizing a layered and laterally constrained 2D inversion of resistivity data using Broyden's update and 1D derivatives     

Anders V. Christiansen  Esben Auken   《Journal of Applied Geophysics》2004,56(4):247

Dense profile-oriented resistivity data allows for 2D and 3D inversions. However, huge amounts of data make it practically impossible to do full 2D or 3D inversions on a routine basis. Therefore, a number of approximations have been suggested over the years to speed up computations. We suggest using a combination of Broyden's update on the Jacobian matrix with derivatives calculated using a 1D formulation on a parameterized 2D model of locally 1D layered models. The approximations bring down the effective number of 2D forward responses to a minimum, which again gives us the ability to invert very large sections. Broyden's update is not as useful with a parameterized problem as is the case with a smooth minimum structure problem that has been the usual application. 1D derivatives, however, seem to be very effective when initiating a full 2D solution with Broyden's update. We compare the different methods using two different kinds of data on two synthetic models and on two field examples. The most effective and reliable optimization combines 1D derivatives with a full 2D solution and Broyden's update. When using Broyden's update the Jacobian matrix needs to be reset every once in a while. We do this whenever the difference in data residual from the previous iteration is less than 5%. This combined inversion method reduces the computation time approximately a factor of 3 without losing model resolution.  相似文献   

Three‐dimensional flow modelling and sediment transport in the River Klarälven     

Bijan Dargahi 《地球表面变化过程与地形》2004,29(7):821-852

  相似文献   

3-D finite element modeling for evolution of stress field and interaction among strong earthquakes in Sichuan-Yunnan region     

陈化然  陈连旺  马宏生  李轶群  张杰卿  何巧云  王建国 《地震学报(英文版)》2004,17(6)

Introduction Sichuan-Yunnan region is a major area with frequent strong earthquakes in Chinese mainland, especially the middle-southern segment of South-North Seismic Zone, where many strong earth-quakes occurred in history. In the past 30 years, Sichuan-Yunnan region has two seismically active periods: one is from Tonghai earthquake in 1970 to Longling-Songpan earthquake in 1976, the other is from Lancang earthquake in 1988 to now. During this two periods, the M=7.7 Tonghai, M=7.1 Dagua…  相似文献   

遥感影像三维可视化研究   总被引：1，自引：0，他引：1  

张顺谦 《气象科技》2004,32(4):233-236

利用DEM高程资料实现遥感影像的三维显示可大大提高遥感监测产品的使用价值，而商用软件成本高操作繁琐普及困难。利用计算机图形学知识和Delphi编程语言，开发了一套遥感影像三维可视化软件。对在开发过程中遇到的有关DEM数据的裁剪与拼接、图像配准、地表模拟、透视变换、消隐处理、光照和阴影效果以及颜色变换等问题的解决方案和实现方法作了简要的介绍。  相似文献   

青海对流云数值模拟分析   总被引：3，自引：0，他引：3  

房文 《气象科技》2004,32(5):343-347

利用中国气象科学研究院三维对流云模式和2002年青海省河南县秋季外场试验取得的资料，进行了数值模拟试验。该地区秋季对流云降水主要为冷云降水，暖雨过程不易启动。降雨主要是由于霰落入暖层融化，雨水的蒸发是雨水减少的主要机制。霰在降水的产生中发挥了重要作用。霰的生成又与冰晶密切相关。冰晶是霰的主要来源，而且也是霰生长的主要因素。初始的霰粒主要由冰霰自动转化生成，而较少由雨滴冻结生成。霰胚通过收集过冷云水和冰晶与霰的碰并又促进了霰的进一步生长。冰晶的生成主要是由于自然冰核的核化，因此，自然冰核的数浓度对整个降水过程都有影响。霰是云中过冷水消耗的主要因素。  相似文献   

经历剪切变形历史的岩石节理表面粗糙特性分析   总被引：5，自引：1，他引：5  

李庆松  杜守继 《岩土力学》2004,25(6):850-855

基于两类岩石节理剪切试验，采用非接触式激光测距仪，实测了剪切前后节理表面粗糙数据，统计分析了岩石节理表面粗糙特性的三维粗糙参数的物理含义，并将这些参数与相应的二维参数进行了充分比较。结果表明，三维参数与二维参数间存在的近似线性关系，而多个三维参数相对比单一的二维参数更全面有效地描述了节理表面粗糙特性。  相似文献   

简要介绍R2V的功能及其在数字化图件中的应用     

吴新刚 《地质与勘探》2004,40(Z1):265-268

许多物化探及地质成果资料以纸质图件保存,在资料的再利用时需对其进行数字化.这里简要介绍一种数字化功能强大的矢量化软件-R2V的功能,针对物化探图件的特点,探讨了R2V数字化的流程.  相似文献   

基于GIS的孔隙水文地质层三维空间离散方法   总被引：8，自引：0，他引：8       下载免费PDF全文

陈锁忠  黄家柱  张金善 《水科学进展》2004,15(5):634-639

针对自然界中孔隙水文地质层空间分布的不连续性与厚度分布的不均匀性,研究基于GIS的孔隙水文地质层三维空间离散实现的技术路线,提出基于GIS的孔隙水文地质层不规则六面体元的三维空间离散方法.该法不仅能最大限度地保证不规则六面体元中水文地质层类型的一元性,而且可充分利用GIS的空间分析与数据的自动提取功能,快速提取各个计算结点上空间位置坐标与各类计算参数,大大缩短水文地质模型空间离散与相关数据文件组织所需的时间,提高地下水三维有限差分数值模拟的时效性,具有较高的实用价值.  相似文献