A non‐coaxial critical state soil model and its application to simple shear simulations     

Yunming Yang  H.S. Yu 《国际地质力学数值与分析法杂志》2006,30(13):1369-1390

The yield vertex non‐coaxial theory is implemented into a critical state soil model, CASM (Int. J. Numer. Anal. Meth. Geomech. 1998; 22 :621–653) to investigate the non‐coaxial influences on the stress–strain simulations of real soil behaviour in the presence of principal stress rotations. The CASM is a unified clay and sand model, developed based on the soil critical state concept and the state parameter concept. Without loss of simplicity, it is capable of simulating the behaviour of sands and clays within a wide range of densities. The non‐coaxial CASM is employed to simulate the simple shear responses of Erksak sand and Weald clay under different densities and initial stress states. Dependence of the soil behaviour on the Lode angle and different plastic flow rules in the deviatoric plane are also considered in the study of non‐coaxial influences. All the predictions indicate that the use of the non‐coaxial model makes the orientations of the principal stress and the principal strain rate different during the early stage of shearing, and they approach the same ultimate values with an increase in loading. These ultimate orientations are dependent on the density of soils, and independent of their initial stress states. The use of the non‐coaxial model also softens the shear stress evolutions, compared with the coaxial model. It is also found that the ultimate shear strengths by using the coaxial and non‐coaxial models are dependent on the plastic flow rules in the deviatoric plane. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Finite deformation analysis of geomaterials     

Boris Jeremi&#x;  Kenneth Runesson  Stein Sture 《国际地质力学数值与分析法杂志》2001,25(8):809-840

The mathematical structure and numerical analysis of classical small deformation elasto–plasticity is generally well established. However, development of large deformation elastic–plastic numerical formulation for dilatant, pressure sensitive material models is still a research area. In this paper we present development of the finite element formulation and implementation for large deformation, elastic–plastic analysis of geomaterials. Our developments are based on the multiplicative decomposition of the deformation gradient into elastic and plastic parts. A consistent linearization of the right deformation tensor together with the Newton method at the constitutive and global levels leads toward an efficient and robust numerical algorithm. The presented numerical formulation is capable of accurately modelling dilatant, pressure sensitive isotropic and anisotropic geomaterials subjected to large deformations. In particular, the formulation is capable of simulating the behaviour of geomaterials in which eigentriads of stress and strain do not coincide during the loading process. The algorithm is tested in conjunction with the novel hyperelasto–plastic model termed the B material model, which is a single surface (single yield surface, affine single ultimate surface and affine single potential surface) model for dilatant, pressure sensitive, hardening and softening geomaterials. It is specifically developed to model large deformation hyperelasto–plastic problems in geomechanics. We present an application of this formulation to numerical analysis of low confinement tests on cohesionless granular soil specimens recently performed in a SPACEHAB module aboard the Space Shuttle during the STS‐89 mission. We compare numerical modelling with test results and show the significance of added confinement by the thin hyperelastic latex membrane undergoing large stretching. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

Visual framework for development and use of constitutive models     

Youssef M. A. Hashash  Donald C. Wotring  John I‐Chiang Yao  Jung‐Suk Lee  Qingwei Fu 《国际地质力学数值与分析法杂志》2002,26(15):1493-1513

  相似文献   

Microplane constitutive model for porous isotropic rocks     

Zdenk P. Baant  Goangseup Zi 《国际地质力学数值与分析法杂志》2003,27(1):25-47

The paper deals with constitutive modelling of contiguous rock located between rock joints. A fully explicit kinematically constrained microplane‐type constitutive model for hardening and softening non‐linear triaxial behaviour of isotropic porous rock is developed. The microplane framework, in which the constitutive relation is expressed in terms of stress and strain vectors rather than tensors, makes it possible to model various microstructural physical mechanisms associated with oriented internal surfaces, such as cracking, slip, friction and splitting of a particular orientation. Formulation of the constitutive relation is facilitated by the fact that it is decoupled from the tensorial invariance restrictions, which are satisfied automatically. In its basic features, the present model is similar to the recently developed microplane model M4 for concrete, but there are significant improvements and modifications. They include a realistic simulation of (1) the effects of pore collapse on the volume changes during triaxial loading and on the reduction of frictional strength, (2) recovery of frictional strength during shearing, and (3) the shear‐enhanced compaction in triaxial tests, manifested by a deviation from the hydrostatic stress–strain curve. The model is calibrated by optimal fitting of extensive triaxial test data for Salem limestone, and good fits are demonstrated. Although these data do not cover the entire range of behaviour, credence in broad capabilities of the model is lend by its similarity to model M4 for concrete—an artificial rock. The model is intended for large explicit finite‐element programs. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

A Continuum Theory For Lattice Preferred Orientation     

Neil M. Ribe 《Geophysical Journal International》1989,97(2):199-207

  相似文献   

应用塑性图对陕西特殊土的判别     

马桂芝 《地球科学与环境学报》1995,(2)

塑性图是由卡萨格兰德（Ａ·Ｃａｓａｇｒａｎｄｅ）于１９４２年首次提出的，该图将阿太量（Ａ·Ａｅｔｅｒｂｅｒｇ）界限（液限、塑限）应用于土质分类．本文根据塑性图判别理论并应用塑性图，对陕西省特殊土（黄土、三趾马红土、膨胀土等）进行了判别，结果为黄土位于ＣＬＹ区，三趾马红土和膨胀土位于ＣＨＥ区，其效果较好，达到了分类的目的．  相似文献   

离子类土壤固化剂对高温冻土工程性质改良试验研究   总被引：2，自引：1，他引：1  

张致龙  张建明  张虎  柴明堂 《冰川冻土》2019,41(1):140-146

为了研究离子类土壤固化剂对青藏高原高温冻土工程性质的改良效果,分别选用酸性和碱性离子类土壤固化剂对冻结青藏粉质黏土进行了改良测试。塑性指数测试表明,两种固化剂的最优含量为0.2%。固化剂含量小于0.3%时,冻结温度相对原状土样没有明显的下降。对不同含量碱性和酸性固化土力学性质进行了测试,无侧限单轴抗压强度相对原状土样整体增大,碱性和酸性固化土抗压强度最大分别提高了78.7%和46.6%,最优配比（0.2%）的碱性和酸性固化土体积压缩系数随养护龄期增大而减小,两种固化土的体积压缩系数相对原状土样最大分别下降了80.0%和38.5%,固化效果明显。碱性固化土力学性质变化更显著,说明其更适合对青藏黏土进行改良。  相似文献   

Solid–fluid transition modelling in geomaterials and application to a mudflow interacting with an obstacle     

Noémie Prime  Frédéric Dufour  Félix Darve 《国际地质力学数值与分析法杂志》2014,38(13):1341-1361

Given the contrasting behaviour observed for geomaterials, for example, during landslides of the flow type, this contribution proposes an original constitutive model, which associates both an elasto‐plastic relation and a Bingham viscous law linked by a mechanical transition criterion. This last is defined as the second‐order work sign for each material point, which is a general criterion for divergence instabilities. Finite element method with Lagrangian integration points is chosen as a framework for implementing the new model because of its well‐known ability to deal with both solid and fluid behaviours in large deformation processes. A first boundary model considering a sample of initially stable soil, a slope and an obstacle is performed. The results show the power of the constitutive model because the consistent evolution of initiation, propagation and arrest of the mudflow is described. A parametric study is led on various plastic and viscous parameters to determine their influence on the flow development and arrest. Finally, forces against the obstacle are compared with good agreement with those of other authors for the same geometry and a pure viscous behaviour. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

CASM: a unified state parameter model for clay and sand     

H. S. Yu 《国际地质力学数值与分析法杂志》1998,22(8):621-653

The purpose of this paper is to present a simple, unified critical state constitutive model for both clay and sand. The model, called CASM (Clay And Sand Model), is formulated in terms of the state parameter that is defined as the vertical distance between current state (v, p′) and the critical state line in v–ln p′ space. The paper first shows that the standard Cam-clay models (i.e. the original and modified Cam-clay models) can be reformulated in terms of the state parameter. Although the standard Cam-clay models prove to be successful in modelling normally consolidated clays, it is well known that they cannot predict many important features of the behavior of sands and overconsolidated clays. By adopting a general stress ratio-state parameter relation to describe the state boundary surface of soils, it is shown that a simple, unified constitutive model (CASM) can be developed for both clay and sand. It is also demonstrated that the standard Cam-clay yield surfaces can be either recovered or approximated as special cases of the yield locus assumed in CASM. The main feature of the proposed model is that a single set of yield and plastic potential functions has been used to model the behaviour of clay and sand under both drained and undrained loading conditions. In addition, it is shown that the behaviour of overconsolidated clays can also be satisfactorily modelled. Simplicity is a major advantage of the present state parameter model, as only two new material constants need to be introduced when compared with the standard Cam-clay models. © 1998 John Wiley & Sons, Ltd.  相似文献   

A continuum model of layered rock masses with non-associative joint plasticity     

D. P. Adhikary  A. V. Dyskin 《国际地质力学数值与分析法杂志》1998,22(4):245-261

Layered rock masses can be modelled either as standard, orthotropic continua if the layer bending can be neglected or as Cosserat continua if the influence of layer bending is essential. This paper presents a finite element smeared joint model based on the Cosserat theory. The layers are assumed to be elastic with equal thickness and equal mechanical properties. All the cosserat parameters are expressed through the elastic properties of layers, layer thickness and joint stiffness. Plastic-slip as well as tensile-opening of layer interface (joint) are accounted for in a manner similar to the conventional non-associative plasticity theory. As an application, the behaviour of an excavation in a layered rock mass is examined. The displacement and stress fields given by smeared joint models based on the Cosserat continuum and the conventional anisotropic continuum approaches are compared with those obtained from the discrete joint model. The conventional anisotropic continuum model is found to break-down completely when the effective shear modulus in the direction parallel to layering is low in comparison to the shear modulus of the intact layer, whereas the Cosserat model is found to be capable of accurately reproducing complex load–deflection patterns irrespective of the differences in shear moduli. © 1998 John Wiley & Sons, Ltd.  相似文献